Vinyl Anaerobic Chamber from Coy Laboratory Products

Get Quote

Get Quote from
Coy Laboratory Products for
Vinyl Anaerobic Chamber

Description

The Vinyl Anaerobic Chambers provide a strict anaerobic atmosphere of 0-5 parts per million (ppm) using a palladium catalyst and hydrogen gas mix of 5%. The heavy duty vacuum airlock allows sample transfer without changes to the internal atmosphere. The Programmable airlock allows the user to tailor an interchange sequence ideal for their lab experiments.

The Flexible nature of the unit allows for the user to reach deeper and higher into the unit. And the flexible nature of the unit combined with padded base and larger glove ports allows for greater ergonomics vs. a rigid glove box. The optically clear vinyl greatly increases operator vision, and the user does not encounter any glove "fight back" as the flexible nature allows the entire glove box to give with changes to internal volume.

GLOVE BOX DETAILS
  • The glove box front is made of 20 mil pressed polished clear vinyl with 40 mil vinyl bottom extending 2" (51 mm) up on all sides. It is mounted on a 3/4" (19 mm) plywood base covered with a 1/4" (6 mm) foam pad and heavy vinyl. A 1" (25 mm) aluminum tubular frame supports the glove box. All glove boxes come with a large equipment entry installed opposite the entry lock. This entrance consists of a 20" (50 cm) entry cap that is taped in place after installing large equipment in the glove box.
  • Glove ports, 10" x 13" oval opening (25 x 33 cm) on 19" (48 cm) centers, are constructed of a special highly flexible vinyl frosted to prevent cracking and gas leakage at bend points.
  • Two 1 1/2" (38 mm) I.D. nipples are attached for electrical wiring input. (Additional nipples may be ordered at the time of purchase.)
  • Also included as standard with all glove boxes, is a six receptacle electric outlet.
  • Large gloves are supplied with the glove box (replacements or other sizes are available from Coy Laboratory Products).
  • The neoprene gloves are placed over a special cuff and then placed in the permanently attached sleeves and taped in place. This system provides a means of replacing damaged gloves without affecting the atmosphere of the glove box. Additional glove ports can be ordered mounted in most positions if requested at the time of purchase.