Coal Ash Analysis Equipment

Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
CompanyCarbolite GeroCarbolite GeroCarbolite GeroCarbolite GeroCarbolite Gero
ItemMFS/1 ISO Minimum Free Space ISO OvenCDHT Coal Drying High Temperature OvenCRF/1 CO2 Reactivity FurnaceCSR Coke Strength after Reduction TumblerCTO Fixed Wall Coke Test Oven
Catalog NumberMFS/1CDHTCRF/1CSRCTO
Price
DescriptionMinimum Free Space Oven, used for the drying of coal. It has the lowest practical volume and heats the known mass of coal in a stream of nitrogen or air at a temperature between 105 and 110. The ovens have a corrosion and oxidisation resistant aluminium chamber, which provides good temperature ... Read MoreCoal Drying high temperature ovens. Air is circulated around the oven by two centrifugal fans with air ducts and guides to ensure that the airflow is horizontal across the chamber. Air inlets and outlets vent out the moist air in the oven and replace it with fresh air. Comes with reliable and long ... Read MoreCarbon anode reactivity test furnace, custom built to determine the reactivity of carbon anodes used in the production of aluminium in either CO2 or air. Used for testing in compliance with the requirements of ISO 12981-1, BS 6043-2.20.1 or ISO 12982-1.Built to measure the resistance of coke to degrade from the impact and abrasion during its descent into a blast furnace, in accordance with ASTM D5341/D5341M-17 and ISO 18894(2018).A pilot scale fixed wall coking oven, designed for testing of granulated and graded coals for coking under accurately controlled conditions. Produced to enable qualitative data to be obtained on the conversion of coal to coke.
ApplicationsCoal and Coke Testing, Drying, Loss on DryingCoal and Coke Testing, Drying, Loss on DryingCoal and Coke TestingCoal and Coke TestingCoal and Coke Testing
Get Quote