Coal Ash Analysis Equipment

Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
CompanyCarbolite GeroCarbolite GeroCarbolite GeroCarbolite GeroCarbolite Gero
ItemMFS/1 ISO Minimum Free Space ISO OvenCDHT Coal Drying High Temperature OvenCTO Fixed Wall Coke Test OvenGSM Specialist Ashing FurnaceIOT Iron Ore Tumbler
Catalog NumberMFS/1CDHTCTOGSMIOT
Price
DescriptionMinimum Free Space Oven, used for the drying of coal. It has the lowest practical volume and heats the known mass of coal in a stream of nitrogen or air at a temperature between 105 and 110. The ovens have a corrosion and oxidisation resistant aluminium chamber, which provides good temperature ... Read MoreCoal Drying high temperature ovens. Air is circulated around the oven by two centrifugal fans with air ducts and guides to ensure that the airflow is horizontal across the chamber. Air inlets and outlets vent out the moist air in the oven and replace it with fresh air. Comes with reliable and long ... Read MoreA pilot scale fixed wall coking oven, designed for testing of granulated and graded coals for coking under accurately controlled conditions. Produced to enable qualitative data to be obtained on the conversion of coal to coke.Ashing Chamber Furnace, constructed from fused quartz material to avoid the impact of alumina or silica dust. Provides superior containment of corrosive and aggressive vapours, in part due to the moulded ceramic fibre door plug.Single Drum Iron Ore Tumbler, that meets standard BS ISO 4696-1:2015 'Iron ores for blast furnace feedstocks -- Determination of low temperature reduction-disintegration indices by static method'. It is applicable to lump ores, sinters and hot-bonded pellets.
ApplicationsCoal and Coke Testing, Drying, Loss on DryingCoal and Coke Testing, Drying, Loss on DryingCoal and Coke TestingAshing, Melting, Sterilising, Loss on Ignition, Combustion, Calcination, Materials TestingCoal and Coke Testing, Iron Ore and Steel Testing
Get Quote