Coal Ash Analysis Equipment

Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
CompanyCarbolite GeroCarbolite GeroCarbolite GeroCarbolite GeroCarbolite Gero
ItemMFS/1 ISO Minimum Free Space ISO OvenAAF Standard Ashing FurnaceCTO Fixed Wall Coke Test OvenIOT Iron Ore TumblerMWO Variable Width Moving Wall Coking Test Oven
Catalog NumberMFS/1AAFCTOIOTMWO
Price
DescriptionMinimum Free Space Oven, used for the drying of coal. It has the lowest practical volume and heats the known mass of coal in a stream of nitrogen or air at a temperature between 105 and 110. The ovens have a corrosion and oxidisation resistant aluminium chamber, which provides good temperature ... Read MoreCoal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet ... Read MoreA pilot scale fixed wall coking oven, designed for testing of granulated and graded coals for coking under accurately controlled conditions. Produced to enable qualitative data to be obtained on the conversion of coal to coke.Single Drum Iron Ore Tumbler, that meets standard BS ISO 4696-1:2015 'Iron ores for blast furnace feedstocks -- Determination of low temperature reduction-disintegration indices by static method'. It is applicable to lump ores, sinters and hot-bonded pellets.Designed and built for testing granulated and grade coals for heating under controlled conditions, the MWO is a Pilot scale coking test oven, that replicates operating conditions found in commercial coke ovens. The oven continuously measures the maximum coke oven wall pressure and internal gas ... Read More
ApplicationsCoal and Coke Testing, Drying, Loss on DryingAshing, Loss on Ignition, Pyrolysis, Sterilising, Combustion, Calcination, Materials Testing, DebindingCoal and Coke TestingCoal and Coke Testing, Iron Ore and Steel TestingCoal and Coke Testing
Get Quote