Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
|  |  |  |  |  |
| Company | Carbolite Gero | Carbolite Gero | Carbolite Gero | Carbolite Gero | Carbolite Gero |
| Item | GSM Specialist Ashing Furnace | AAF Standard Ashing Furnace | ABF Afterburner Ashing Furnace | CDHT Coal Drying High Temperature Oven | LTD Low Temperature Reduction Disintegration of Iron Ore |
| Catalog Number | GSM | AAF | ABF | CDHT | LTD |
| Price | | | | | |
| Description | Ashing Chamber Furnace, constructed from fused quartz material to avoid the impact of alumina or silica dust. Provides superior containment of corrosive and aggressive vapours, in part due to the moulded ceramic fibre door plug. | Coal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet Coal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet and tall chimney to allow 4 to 5 volume air changes per minute.... Read More | Afterburning Ashing Furnace, suitable for ashing larger samples or materials that are likely to generate a substantial amount of smoke. Possess silicon carbide shielded wire would elements and two tier baskets with a loading tray and handle. | Coal Drying high temperature ovens. Air is circulated around the oven by two centrifugal fans with air ducts and guides to ensure that the airflow is horizontal across the chamber. Air inlets and outlets vent out the moist air in the oven and replace it with fresh air. Comes with reliable and long Coal Drying high temperature ovens. Air is circulated around the oven by two centrifugal fans with air ducts and guides to ensure that the airflow is horizontal across the chamber. Air inlets and outlets vent out the moist air in the oven and replace it with fresh air. Comes with reliable and long lasting mineral insulated metal sheathed elements.... Read More | Low Temperature Reduction Furnace, for dynamic testing for low temperature reduction - disintegration of Iron Ore. Meets the International Standard BS ISO 13930:2015. Has easy access for loading and unloading the reduction barrel and a corrosion and oxidisation resistant Inconel retort. Also has a Low Temperature Reduction Furnace, for dynamic testing for low temperature reduction - disintegration of Iron Ore. Meets the International Standard BS ISO 13930:2015. Has easy access for loading and unloading the reduction barrel and a corrosion and oxidisation resistant Inconel retort. Also has a gas safety system, along with an audible alarm system for over-temperature, low gas flow and flame failure on the gas burn off.... Read More |
| Applications | Ashing, Melting, Sterilising, Loss on Ignition, Combustion, Calcination, Materials Testing | Ashing, Loss on Ignition, Pyrolysis, Sterilising, Combustion, Calcination, Materials Testing, Debinding | Ashing, Combustion, Sterilising, Thermal Debinding, Sublimation, Loss on Ignition | Coal and Coke Testing, Drying, Loss on Drying | Coal and Coke Testing |
| Get Quote | | | | | |