Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
|  |  |  |  |  |
| Company | Carbolite Gero | Carbolite Gero | Carbolite Gero | Carbolite Gero | Carbolite Gero |
| Item | CSR Coke Strength after Reduction Tumbler | AAF Standard Ashing Furnace | CAF G5 Ash Fusibility Testing Tube Furnace | IOT Iron Ore Tumbler | MFS/1 ISO Minimum Free Space ISO Oven |
| Catalog Number | CSR | AAF | CAF G5 | IOT | MFS/1 |
| Price | | | | | |
| Description | Built to measure the resistance of coke to degrade from the impact and abrasion during its descent into a blast furnace, in accordance with ASTM D5341/D5341M-17 and ISO 18894(2018). | Coal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet Coal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet and tall chimney to allow 4 to 5 volume air changes per minute.... Read More | Coal ash fusibility furnaces, specially designed to test coal ash fusibility and optionally the increasingly popular determination of biomass or solid recovered fuel testing. Conforms to the required standards : ISO 540:2008: ASDTM D 1857 / D1857M - 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:Coal ash fusibility furnaces, specially designed to test coal ash fusibility and optionally the increasingly popular determination of biomass or solid recovered fuel testing. Conforms to the required standards : ISO 540:2008: ASDTM D 1857 / D1857M - 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and PD CEN/TR 15404:2010 (SRF).... Read More | Single Drum Iron Ore Tumbler, that meets standard BS ISO 4696-1:2015 'Iron ores for blast furnace feedstocks -- Determination of low temperature reduction-disintegration indices by static method'. It is applicable to lump ores, sinters and hot-bonded pellets. | Minimum Free Space Oven, used for the drying of coal. It has the lowest practical volume and heats the known mass of coal in a stream of nitrogen or air at a temperature between 105 and 110. The ovens have a corrosion and oxidisation resistant aluminium chamber, which provides good temperature Minimum Free Space Oven, used for the drying of coal. It has the lowest practical volume and heats the known mass of coal in a stream of nitrogen or air at a temperature between 105 and 110. The ovens have a corrosion and oxidisation resistant aluminium chamber, which provides good temperature uniformity. Comes with over temperature control.... Read More |
| Applications | Coal and Coke Testing | Ashing, Loss on Ignition, Pyrolysis, Sterilising, Combustion, Calcination, Materials Testing, Debinding | Coal and Coke Testing, Coal Assay, Ash Fusibility, Materials Testing | Coal and Coke Testing, Iron Ore and Steel Testing | Coal and Coke Testing, Drying, Loss on Drying |
| Get Quote | | | | | |