| Description | This kit enables convenient and efficient separation of nuclear and cytoplasmic proteins from animal cells or tissues. It employs a stepwise cell lysis protocol to isolate intact nuclei from the cytoplasm, followed by extraction of nuclear proteins.The kit contains potent detergents that extract notThis kit enables convenient and efficient separation of nuclear and cytoplasmic proteins from animal cells or tissues. It employs a stepwise cell lysis protocol to isolate intact nuclei from the cytoplasm, followed by extraction of nuclear proteins.The kit contains potent detergents that extract not only nuclear membrane proteins but also soluble proteins such as histones and nuclear transcription factors. Compared to traditional kits requiring 30–40 minutes for nuclear protein extraction, this product reduces the extraction time to 10 minutes. It delivers higher nuclear protein yields and superior nuclear-cytoplasmic separation, making it particularly suitable for Western Blot applications.N1491647Component50TStorageN1491647AWB nuclear/plasma reagent A20 mL2-8℃N1491647BWB nuclear/plasma reagent B0.5 mL2-8℃N1491647CWB nuclear/plasma reagent C5 mL2-8℃Key Features1.Rapid: Optimized protocol reduces extraction time by 10–20 minutes compared to traditional kits.2.High Yield: Formulated for Western Blot applications, delivering higher nuclear protein yields than conventional kits.3.High Purity: Excellent separation of nuclear/cytoplasmic proteins with minimal cross-contamination (outperforms traditional kits).4.Easy Operation: Simple protocol without ultracentrifugation gradients.ProtocolPlace all kit components on ice. Add 1× protease inhibitor (Cat. No. P665818) or 1× protease/phosphatase inhibitor (Cat. No. P752090) to Reagent A and Reagent C before use.Animal Cells1.Harvest Cells:Adherent cells: Discard medium, wash with PBS, scrape cells, and transfer to a tube. Centrifuge at 300 ×g for 5 min.Suspension cells: Centrifuge at 300 ×g for 5 min, wash with PBS, and repeat centrifugation.2.Resuspend cells in PBS, transfer 2 × 10⁶ cells to a 1.5 mL tube, and centrifuge at 300 ×g for 5 min. Discard supernatant.3.Add 200 µL Reagent A to the pellet, mix thoroughly, and incubate on ice for 10 min.4.Add 10 µL Reagent B, vortex at maximum speed for 5 sec, and incubate on ice for 1 min.5.Vortex again at maximum speed for 5 sec and incubate on ice for 2 min.Note: Adjust ice incubation time (1–3 min) based on cell type to avoid aggregation.6.Centrifuge at 1,600 ×g for 10 min (4°C). Carefully transfer the supernatant (cytoplasmic fraction) to a new tube. Store at -80°C if needed.Note: Avoid touching the pellet. Retain a minimal volume of supernatant to reduce contamination.7.Resuspend the pellet in 200 µL Reagent A, mix thoroughly, and centrifuge at 13,000 ×g for 5 min (4°C). Discard supernatant completely.Note: The pellet contains nuclei. Use a 10 µL tip to remove residual supernatant.8.Add 100 µL Reagent C to the pellet, vortex at maximum speed for 10 sec, and incubate on ice. Repeat vortexing every 2 min for 10 min.9.Centrifuge at 13,000 ×g for 10 min (4°C). Transfer the supernatant (nuclear protein fraction) to a new tube and store at -80°C.Animal Tissues1.Mince 20–80 mg tissue into small fragments in a 2 mL tube (optional: add PBS and grind with a syringe plunger). Centrifuge at 1,600 ×g for 3 min (4°C) to collect fragments.2.Add Reagent A (see Table 1 for volumes) to the fragments, transfer to a homogenizer, and homogenize on ice.Note: Cut pipette tips to facilitate transfer of tissue fragments.3.Transfer the homogenate to a pre-chilled tube and incubate on ice for 15 min.4.Add Reagent B (Table 1), vortex at maximum speed for 5 sec, and incubate on ice for 1 min.5.Vortex again for 5 sec and incubate on ice for 2 min.6.Centrifuge at 1,600 ×g for 10 min (4°C). Transfer the supernatant (cytoplasmic fraction) to a new tube. Store at -80°C if needed.7.Resuspend the pellet in the same volume of Reagent A as Step 2, mix, and centrifuge at 13,000 ×g for 5 min (4°C). Discard supernatant.8.Add Reagent C (Table 1) to the pellet, vortex at maximum speed for 10 sec, and incubate on ice. Vortex every 2 min for 10 min.9.Centrifuge at 13,000 ×g for 10 min (4°C). Transfer the supernatant (nuclear protein fraction) to a new tube and store at -80°C. Table 1. Recommended Reagent Volumes for Tissue Extraction组织重量/mgWB核/浆试剂A/µLWB核/浆试剂B/µLWB核/浆试剂C/µL20200101004040020200608004040080100050500Precautions1.Add 1× protease inhibitor (Cat. No. P665818) or 1× protease/phosphatase inhibitor (Cat. No. P752090) to Reagent A and Reagent C before use.2.This kit is optimized for Western Blot and is not compatible with SDS-sensitive applications.3.Quantify extracted proteins using the BCA Protein Assay Kit (Cat. No. R1491648/B665595).4.Wear a lab coat and disposable gloves for safety.5.For research use only... Read More | Inquire | Product Characteristics Effect Diluents, Animal-free are effective buffers free of any animal components. They can be used for the dilution of serum, plasma, blood, stool or urine samples, as well as the dilution of primary and secondary antibodies. Effect Diluents, Animal-free efficiently minimize Product Characteristics Effect Diluents, Animal-free are effective buffers free of any animal components. They can be used for the dilution of serum, plasma, blood, stool or urine samples, as well as the dilution of primary and secondary antibodies. Effect Diluents, Animal-free efficiently minimize matrix effects, cross-reactions and unspecific binding in immunoassays like ELISA, Western blotting, Immunohistochemistry, protein arrays and immuno-PCR.The Effect Diluents, Animal-free are used alternatively to the standard sample or antibody dilution buffers: In ELISA for the dilution of specimen and detection antibodies. In Western Blotting for the dilution of primary and secondary antibodies. In Protein arrays for the dilution of specimen and detection antibodies. In immuno-PCR as a washing buffer.Three versions of the diluent are offered: Low, Medium and High for optimal discrimination between specific and unspecific reaction and for minimizing strong interference effects e.g., by RF (rheumatoid factors), HAMAs (human-a-mouse Abs) or by endogenous components that bind and mask the analyte.Composition & Properties The Effect Diluents, Animal free contain no animal components and are free of phosphates.Working Procedure 1.Mix thoroughly prior to use. 2.Dilution recommendations a.Dilute antibodies according to the instruction of the antibody b.Dilution of the specimen is recommended at 1:2 or higherTips & TricksEffect Diluents must not be considered as blocking buffers. Recommended blocking buffers are: Synthetic Blocking Buffer, ELISA (cat. no. S494401), Synthetic Blocking Buffer, Blotting (cat. no. S494457) and WellChampion (cat. no. W494467) for plate blocking and stabilization (preparation of pre-coated plates). Complex sample matrices, such as serum and plasma, may contain interfering factors that affect the ability of the assay to accurately quantify the target analyte. Strong interferences are often caused by RFs and HAMAs. This matrix effect can cause high background in the negative control or false negatives in the sample measurement. To reduce this effect the samples can be diluted in the Effect Diluents, Animalfree.Handling & Storage Store solution 2-8°C or -15 to -30°C (tolerates freezing and thawing cycles)... Read More | Product introduction：This kit uses an improved SDS alkaline lysis method combined with DNA preparation membrane to selectively adsorb DNA to achieve the purpose of rapid purification of plasmid DNA. It is suitable for extracting up to 100u of high-purity plasmid DNA from 30-100 ml of Product introduction：This kit uses an improved SDS alkaline lysis method combined with DNA preparation membrane to selectively adsorb DNA to achieve the purpose of rapid purification of plasmid DNA. It is suitable for extracting up to 100u of high-purity plasmid DNA from 30-100 ml of bacterial culture for sequencing, in vitro transcription and translation, restriction enzyme digestion, bacterial transformation and other molecular biology experiments.Scope of application：Nucleic acid extraction and purification... Read More | Product contentS665868Component50 TStorageS665868ABuffer GL25 mLRTS665868BBuffer GW1 (concentrate)13 mLRTS665868CBuffer GW2 (concentrate)15 mLRTS665868DBuffer GE15 mLRTS665868EProteinase K2×1.25 mLRTS665868FSpin Columns DM with Collection Tubes50 setsRTProduct IntroductionThis kit is suitable Product contentS665868Component50 TStorageS665868ABuffer GL25 mLRTS665868BBuffer GW1 (concentrate)13 mLRTS665868CBuffer GW2 (concentrate)15 mLRTS665868DBuffer GE15 mLRTS665868EProteinase K2×1.25 mLRTS665868FSpin Columns DM with Collection Tubes50 setsRTProduct IntroductionThis kit is suitable for the extraction of genomic DNA from fresh saliva or saliva/preservation solution mixture.The purification process of this product does not require the use of toxic solvents such as phenol or chloroform, and ethanol precipitation is not necessary. The optimized buffer system enables DNA to bind heterogeneously to the silica matrix centrifugal adsorption column, and the inhibitors of PCR and other enzymatic reactions can be effectively removed by a two-step washing step, and finally eluted with a low-salt buffer or water to obtain high-purity DNA.The purified obtained can be directly used for enzyme digestion, PCR, Real-Time PCR, library construction, Southern Blot, molecular labeling and other downstream experiments.Self-contained reagent: anhydrous ethanolPre-experiment Preparation and Important Notes1. Repeated freezing and thawing of the sample should be avoided, as this may result in smaller fragments of extracted DNA and a decrease in the amount extracted.2. Anhydrous ethanol should be added to Buffer GW1 and Buffer GW2 according to the instructions on the label of the reagent bottle before first use.3. Before use, please check whether Buffer GL appears to be crystallized or precipitated.Redissolve in a 56°C water bath.4. If the downstream experiments are sensitive to RNA contamination, 4 µL DNase-Free RNase A can be added in step 3(100 mg/mL).5. For prolonged storage of salivary DNA at room temperature, our Salivary DNA Preservation Tubes are recommended.Operation steps1. Add 400 µL of saliva sample or saliva/preservation solution mixture.Note: 1) Saliva mixtures added to the preservation solution require a 50°C water bath for 1 hour or an empty 50°C temperature chamber for 2 hours prior to extraction.2) If an increase in sample volume is required, multiply the volumes of Proteinase K, Buffer GL, and anhydrous ethanol in Steps 2-4, and the liquid can be transferred in multiple times in Step 5.2. Add 40 µL of Proteinase K.3. Add 400µL Buffer GL, vortex and shake to mix thoroughly, and water bath at 56℃ for 15-30 minutes.Note: If RNA removal is required, add 4 µL of RNase A solution at a concentration of 100 mg/mL after the above steps are completed, vortex for 15 seconds, and leave at room temperature for 2 minutes.4. Centrifuge briefly to remove water droplets from the inside of the tube cap. Add 400 µL of anhydrous ethanol and mix well by vortexing and shaking. Centrifuge briefly.Note: 1) Vortex and shake to mix immediately after adding Buffer GL and anhydrous ethanol.The addition of Buffer GL and anhydrous ethanol may produce a white precipitate that will not affect subsequent experiments.2) A sol-gel product may be formed after GL and anhydrous ethanol, in which case vigorous shaking or vortexing is recommended.3) The solution obtained in the previous step is added to the adsorption column in the Collection Tube.5. (Spin Column DM) in the collection tube, and if the solution cannot be added all at once, it can be transferred in several times. centrifuge at 12,000 rpm (∼13,400 × g) for 1 min, pour off the waste solution in the collection tube, and put the adsorption column back into the collection tube.6. Add 500 µL of Buffer GW1 to the adsorption column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorption column back into the collection tube.7. Add 500 µL of Buffer GW2 to the adsorption column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorption column back into the collection tube.Note: Step 7 can be repeated if further DNA purity is required.8. Centrifuge at 12,000 rpm for 2 minutes and pour off the waste liquid in the collection tube. Leave the adsorption column at room temperature for several minutes to dry thoroughly.Note: The purpose of this step is to remove residual ethanol from the adsorption column, which can interfere with subsequent enzymatic reactions (digestion, PCR, etc.).9. Place the adsorption column in a new centrifuge tube (supplied), add 50-200 µL of Buffer GE or sterilized water to the middle of the adsorption column overhanging the column, let it stand at room temperature for 2-5 minutes, and centrifuge at 12,000 rpm for 1 minute to collect the DNA solution.-20°C to preserve DNA.Note: 1) If the downstream experiment is sensitive to pH or EDTA, you can use sterilized water for elution. The pH of the eluent has a great influence on the elution efficiency, if water is used as the eluent should ensure that its pH is 7.0-8.5 (you can use NaOH to adjust the pH of the water to this range), and the elution efficiency is not high when the pH is lower than 7.0.2) Buffer GE preheated in a 65-70°C water bath and incubated at room temperature for 5 min before centrifugation can increase the yield.3) Because DNA preserved in water is subject to acidic hydrolysis, for long-term storage, elution with Buffer GE and storage at -20°C is recommended... Read More |