| Description | This kit enables convenient and efficient separation of nuclear and cytoplasmic proteins from animal cells or tissues. It employs a stepwise cell lysis protocol to isolate intact nuclei from the cytoplasm, followed by extraction of nuclear proteins.The kit contains potent detergents that extract notThis kit enables convenient and efficient separation of nuclear and cytoplasmic proteins from animal cells or tissues. It employs a stepwise cell lysis protocol to isolate intact nuclei from the cytoplasm, followed by extraction of nuclear proteins.The kit contains potent detergents that extract not only nuclear membrane proteins but also soluble proteins such as histones and nuclear transcription factors. Compared to traditional kits requiring 30–40 minutes for nuclear protein extraction, this product reduces the extraction time to 10 minutes. It delivers higher nuclear protein yields and superior nuclear-cytoplasmic separation, making it particularly suitable for Western Blot applications.N1491647Component50TStorageN1491647AWB nuclear/plasma reagent A20 mL2-8℃N1491647BWB nuclear/plasma reagent B0.5 mL2-8℃N1491647CWB nuclear/plasma reagent C5 mL2-8℃Key Features1.Rapid: Optimized protocol reduces extraction time by 10–20 minutes compared to traditional kits.2.High Yield: Formulated for Western Blot applications, delivering higher nuclear protein yields than conventional kits.3.High Purity: Excellent separation of nuclear/cytoplasmic proteins with minimal cross-contamination (outperforms traditional kits).4.Easy Operation: Simple protocol without ultracentrifugation gradients.ProtocolPlace all kit components on ice. Add 1× protease inhibitor (Cat. No. P665818) or 1× protease/phosphatase inhibitor (Cat. No. P752090) to Reagent A and Reagent C before use.Animal Cells1.Harvest Cells:Adherent cells: Discard medium, wash with PBS, scrape cells, and transfer to a tube. Centrifuge at 300 ×g for 5 min.Suspension cells: Centrifuge at 300 ×g for 5 min, wash with PBS, and repeat centrifugation.2.Resuspend cells in PBS, transfer 2 × 10⁶ cells to a 1.5 mL tube, and centrifuge at 300 ×g for 5 min. Discard supernatant.3.Add 200 µL Reagent A to the pellet, mix thoroughly, and incubate on ice for 10 min.4.Add 10 µL Reagent B, vortex at maximum speed for 5 sec, and incubate on ice for 1 min.5.Vortex again at maximum speed for 5 sec and incubate on ice for 2 min.Note: Adjust ice incubation time (1–3 min) based on cell type to avoid aggregation.6.Centrifuge at 1,600 ×g for 10 min (4°C). Carefully transfer the supernatant (cytoplasmic fraction) to a new tube. Store at -80°C if needed.Note: Avoid touching the pellet. Retain a minimal volume of supernatant to reduce contamination.7.Resuspend the pellet in 200 µL Reagent A, mix thoroughly, and centrifuge at 13,000 ×g for 5 min (4°C). Discard supernatant completely.Note: The pellet contains nuclei. Use a 10 µL tip to remove residual supernatant.8.Add 100 µL Reagent C to the pellet, vortex at maximum speed for 10 sec, and incubate on ice. Repeat vortexing every 2 min for 10 min.9.Centrifuge at 13,000 ×g for 10 min (4°C). Transfer the supernatant (nuclear protein fraction) to a new tube and store at -80°C.Animal Tissues1.Mince 20–80 mg tissue into small fragments in a 2 mL tube (optional: add PBS and grind with a syringe plunger). Centrifuge at 1,600 ×g for 3 min (4°C) to collect fragments.2.Add Reagent A (see Table 1 for volumes) to the fragments, transfer to a homogenizer, and homogenize on ice.Note: Cut pipette tips to facilitate transfer of tissue fragments.3.Transfer the homogenate to a pre-chilled tube and incubate on ice for 15 min.4.Add Reagent B (Table 1), vortex at maximum speed for 5 sec, and incubate on ice for 1 min.5.Vortex again for 5 sec and incubate on ice for 2 min.6.Centrifuge at 1,600 ×g for 10 min (4°C). Transfer the supernatant (cytoplasmic fraction) to a new tube. Store at -80°C if needed.7.Resuspend the pellet in the same volume of Reagent A as Step 2, mix, and centrifuge at 13,000 ×g for 5 min (4°C). Discard supernatant.8.Add Reagent C (Table 1) to the pellet, vortex at maximum speed for 10 sec, and incubate on ice. Vortex every 2 min for 10 min.9.Centrifuge at 13,000 ×g for 10 min (4°C). Transfer the supernatant (nuclear protein fraction) to a new tube and store at -80°C. Table 1. Recommended Reagent Volumes for Tissue Extraction组织重量/mgWB核/浆试剂A/µLWB核/浆试剂B/µLWB核/浆试剂C/µL20200101004040020200608004040080100050500Precautions1.Add 1× protease inhibitor (Cat. No. P665818) or 1× protease/phosphatase inhibitor (Cat. No. P752090) to Reagent A and Reagent C before use.2.This kit is optimized for Western Blot and is not compatible with SDS-sensitive applications.3.Quantify extracted proteins using the BCA Protein Assay Kit (Cat. No. R1491648/B665595).4.Wear a lab coat and disposable gloves for safety.5.For research use only... Read More | Inquire | Product content： O665490Component50 TStorageO665490ABlocking Buffer500 mL2-8℃. Do not freeze.O665490BAntibody Pretreat Solution (HRP/Rabbit)5×1 mL2-8℃. Do not freeze.O665490CDilution Buffer500 mL2-8℃. Do not freeze.O665490DWash Buffer (10×)500 mL2-8℃. Do not Product content： O665490Component50 TStorageO665490ABlocking Buffer500 mL2-8℃. Do not freeze.O665490BAntibody Pretreat Solution (HRP/Rabbit)5×1 mL2-8℃. Do not freeze.O665490CDilution Buffer500 mL2-8℃. Do not freeze.O665490DWash Buffer (10×)500 mL2-8℃. Do not freeze. Product Introduction：The one-step rapid WB assay kit (rabbit) is the latest Western Blot detection kit developed by Kangwei Century, which canObtain high-quality Western Blot results within about 1 hour, with simple operation, high detection sensitivity, low background, and noAdditional secondary antibodies need to be added, with strong system stability. The conventional Western Blot indirect detection process (blocking, primary antibody binding)Combining with secondary antibodies requires a long time, a complex experimental process, and requires multi-step optimization of conditions. The protein on the glue is transferred toAfter coating the carrier membrane, incubate it with the blocking solution in the reagent kit for 5 minutes, and then incubate the carrier with the primary antibody treated with antibody reaction solutionAfter washing the membrane three times (5 minutes each time), it can undergo luminescence or color detection. This reagent kit is designed for target protein oneThe use of an experimental system derived from rabbits.Notes:1. Customers need to prepare their own rabbit source primary antibody.2. Before using Blocking Buffer blocking solution, Antibody Pretreat Solution (HRP/Rabbit) antibody reaction solution (rabbit), and Wash Buffer (10 x) rinse solution, please mix thoroughly.3. If there is precipitation in the rinsing solution when stored at 2-8 ℃, please restore it to room temperature, dissolve the precipitation, and use it normally. The 1x rinsing solution can be stored at room temperature for one month.4. It is recommended to stain the membrane with reagents such as spring red after the transfer is completed, and cut off any excess parts on the membrane to increase the efficiency of the reagents.5. The optimal dilution amount for primary antibody and antibody reaction solution HRP (rabbit) needs to be determined through preliminary experiments.6. Antibody reaction solution HRP (rabbit), antibody dilution solution, and antibody dosage can be increased or decreased proportionally according to the size of the membrane.7. The antibody dilution solution containing the first antibody can be recycled and reused once. Antibodies with low specificity and affinity are not recommended for repeated use. If the recovered antibody is used within 1-2 days and stored at 2-8 ℃ for long-term storage, please freeze it at -20 ℃ to avoid repeated freeze-thaw cycles.8. If there is a high background, please adjust the amount of antibodies and increase the number of times the film is washed.9. All reagents in the reagent kit should be stored at 2-8 ℃ to avoid freezing and thawing.Operation steps:This product is suitable for the sealing and antibody incubation steps after membrane transfer, taking a 5 cm x 8 cm membrane as an example:1. Preparation of rinsing solution: Dilute 10 ml of Wash Buffer (10 x) with distilled water to 100 ml, which is 1 x Wash Buffer. Set aside. Use 8-10 ml for each film wash.2. Sealing: After the membrane transfer is completed, immerse the membrane in 10 ml Blocking Buffer and seal at room temperature for 5 minutes.3. Rinse: Pour off the sealing solution, add 8-10 ml of 1 x Wash Buffer, and rinse at a high speed on a shaker for 1 minute.4. Prepare antibody incubation solution while washing the membrane: Take Antibody Pretreat Solution (HRP/Rabbit) 100 µ Add rabbit derived primary antibody 3-10 into the centrifuge tube µ g. Suck and beat the gun head until thoroughly mixed, and incubate at room temperature for 5 minutes. Add to 10 ml Dilution Buffer and mix well. Note: 1) The dosage of primary antibody can also be adjusted according to the dilution of the antibody. Taking the final dilution of antibodies at 1:1000 as an example, take 100 µ Add HRP (rabbit) antibody reaction solution into the EP tube and add 10 µ Add the first antibody to 10 ml of antibody diluent, mix well, and incubate at room temperature for 5 minutes. 2) If the membrane area is small, the amount of antibodies, reaction solution, and diluent can be reduced proportionally.5. After completing step 3, pour out the rinsing solution and add the antibody incubation solution mixed with primary antibody, Antibody Pretreat Solution (HRP/Rabbit), and Dilution Buffer to the membrane (ensuring that the incubation solution completely submerges the membrane surface). Incubate at room temperature on a shaker at a speed of about 60 rpm for 40 minutes.6. Discard (recover) the antibody incubation solution and rinse 3-5 times with the prepared 1 x Wash Buffer, each time for 3 minutes.7. Conduct subsequent testing. It is recommended to use ECL or DAB methods for testing.Example 1: Antigen 293T cell lysateA: Ordinary WB control: beta actin rabbit antibody (CW0097) 3.3ug incubated at room temperature for 40 minutes, washed with membrane, secondary antibody sheep anti rabbit HRP (CW0103) diluted at 1:10000, room temperature for 40 minutes, ECL (CW0049) exposed Example 2 Antigen is 293T cell lysateC: Ordinary WB control: PAK1, Epitomics rabbit monoclonal antibody 1:1000, incubated at room temperature for 40 minutes, washed with membrane, secondary antibody sheep anti rabbit HRP (CW0103) diluted at 1:10000, room temperature for 40 minutes, ECL (CW0049) exposedD: One step WB: Epitomics rabbit monoclonal antibody was incubated at 1:1000 room temperature for 40 minutes, and ECL (CW0049) was exposed... Read More | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export | Vitamins Kit is a multivitamin mix comprising biotin, folic acid, vitamin B6, riboflavin, thiamine, D-pantothenic acid and niacinamide.Vitamins Kit has been used as a vitamin supplement in the minimal medium for conidia spores and vegetative cultures |