| Description | Free Fatty Acids (FFA), also known as Non-Esterified Fatty Acids (NEFA), are primarily produced by the hydrolysis of neutral fats. They are intermediate products in fat metabolism, involved in cell proliferation, inflammatory responses, and hormone regulation. FFA can also act as signaling moleculesFree Fatty Acids (FFA), also known as Non-Esterified Fatty Acids (NEFA), are primarily produced by the hydrolysis of neutral fats. They are intermediate products in fat metabolism, involved in cell proliferation, inflammatory responses, and hormone regulation. FFA can also act as signaling molecules with various physiological functions. Free fatty acids are closely related to lipid metabolism, glucose metabolism, and endocrine function. Their concentration is an important physiological and biochemical indicator, serving as an auxiliary parameter for disease evaluation and diagnosis, and also reflecting quality changes during food storage.Detection Principle: FFAs combine with copper ions to form copper soaps, which are soluble in chloroform. The copper ions can then react with a chromogenic solution to form a purplish-red complex. This product has a characteristic absorption peak at 550 nm. The FFA content can be quantified by measuring the change in absorbance.Detection Range: 0.0313 - 2 mMSensitivity: 0.0156 mMApplicable Samples: Serum (plasma), animal/plant tissues, cells, bacteria.A1492746Component48T96TStorageA1492746ACu Reagent6 mL12 mL2-8℃. Store in the dark.A1492746BChromogen15 mL30 mL2-8℃. Store in the dark.A1492746CStandard (16.41 mg Palmitic Acid)1 EA1 EA2-8℃. Store in the dark.User-Prepared Instruments and ReagentsMicroplate reader or visible spectrophotometer (capable of measuring absorbance at 550 nm)Incubator, Ice maker, Low-temperature centrifuge96-well plate or micro glass cuvettes, Adjustable pipettes and tipsHomogenizer (for tissue samples)Glass bottle (for preparing extraction buffer)n-Heptane, Anhydrous methanol, ChloroformExperimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsExtraction Buffer (Self-prepared)In a glass bottle, mix Chloroform : n-Heptane : Anhydrous Methanol = 28 : 21 : 1. Cap tightly and mix well.Store at 4°C protected from light.Cu ReagentReady-to-use; equilibrate to room temperature before use; mix well before use.Store at 4°C protected from light.ChromogenReady-to-use; equilibrate to room temperature before use.Store at 4°C protected from light.StandardBefore use, dissolve contents in 1 mL of Extraction Buffer to obtain a 64 mM Standard solution. Mix well.Unused dissolved Standard can be stored in a tightly sealed glass bottle at 4°C protected from light for 1 month.2. Standard Curve SetupDilute the 64 mM Standard further with Extraction Buffer as shown in the table below.Standard No.Standard (µL)Extraction Buffer Volume (µL)Standard Concentration (mM)Std.120µL of 64mM stock6202Std.2100µL of Std.11001Std.3100µL of Std.21000.5Std.4100µL of Std.31000.25Std.5100µL of Std.41000.125Std.6100µL of Std.51000.0625Std.7100µL of Std.61000.0313Note: Prepare freshly diluted standards for each experiment.3. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for up to 6 months.3.1 Animal Tissues: Weigh approximately 0.1 g of tissue, add 1 mL of Extraction Buffer, and homogenize on ice. Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.2 Plant Tissues: Weigh approximately 0.1 g of tissue, add 1 mL of Extraction Buffer, and grind. Disrupt by ultrasonic homogenization on ice (power 20% or 200 W, ultrasonicate for 3 s, interval 7 s, repeat 30 times). Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.3 Cells or Bacteria: Collect 5 million cells or bacteria into a centrifuge tube. Wash with cold PBS, centrifuge, and discard the supernatant. Add 1 mL of Extraction Buffer. Disrupt by ultrasonic homogenization on ice (power 20% or 200 W, ultrasonicate for 3 s, interval 7 s, repeat 30 times). Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.4 Serum (Plasma) and other liquids: Detect directly.4. Assay Steps4.1 Instrument Preparation: Preheat the microplate reader or visible spectrophotometer for at least 30 minutes. Set the wavelength to 550 nm. For spectrophotometers, zero the instrument with deionized water.4.2 Sample Assay (Add reagents sequentially to EP tubes):ReagentBlank Tube (µL)Standard Tube (µL)Test Tube (µL)Extraction Buffer240200200Various Std.0400Sample0040Cap the tubes tightly and vortex at medium speed for 30 seconds.Cu Reagent808080Cap the tubes tightly and vortex at medium speed for 30 seconds. Incubate at room temperature (25°C) for 20 minutes. Centrifuge at 2,000 g, room temperature (25°C) for 5 minutes.Upper Phase505050Chromogen2002002004.3 Incubate at room temperature (25°C) for 5 minutes. Transfer 200 µL from each tube to the corresponding wells of a 96-well plate or micro glass cuvettes. Measure the absorbance at 550 nm.Calculate ΔAtest=Atest-Ablank and ΔAstd=Astd-Ablank (The blank tube only needs to be set up once).Note: The measurement must be completed within 30 minutes after color development. It is recommended to perform preliminary experiments with 2-3 samples expected to have significant differences before formal testing. If Atest exceeds the detection range of the instrument, dilute the sample further with Extraction Buffer and multiply the result by the dilution factor.5. Result CalculationWe provide both derived and simplified calculation formulas, which are equivalent. The simplified formulas in bold are recommended as the final calculation formulas.5.1 Standard Curve PlottingPlot the standard curve with standard concentration as the y-axis and ΔAstd as the x-axis (using concentration as the y-axis facilitates calculation). Substitute ΔAtest into the standard curve equation to obtain y (mM).5.2 Sample FFA Content Calculation(1) Based on sample mass:FFA Content (µmol/g fresh weight) = y × Vextract ÷ W × n = y ÷ W × n(2) Based on bacterial or cell count:FFA Content (µmol/10⁴ cells) = y ÷ (Cell or Bacterial Count ÷ Vextract ) × n = y ÷ 500 × n = 0.002 × y × n(3) Based on liquid volume:FFA Content (µmol/L) = 1000 × y × nParameter Description:Vextract : Volume of Extraction Buffer added, 1 mLW: Sample mass, gn: Sample dilution factor (if further diluted)500: Cell or bacterial count, in units of 10⁴1000: Unit conversion factor, 1 L = 1000 mL6. Result PresentationTypical Standard Curve: y = 0.679x - 0.0109, R² = 0.9988(Free Fatty Acid (FFA) standard curve analyzed using a 96-well plate. Data and curve are for reference only; users must establish their own standard curve based on their experiment.)Precautions1. Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please implement appropriate biosafety precautions throughout the experiment. Wear personal protective equipment such as lab coats, masks, gloves, and hair caps. Perform experiments in a fume hood or biosafety cabinet.2. This product is for scientific research use only. Not intended for clinical diagnosis... Read More | Description：Acetylcholinesterases (AChEs) are enzymes that hydrolyze the neurotransmitter acetylcholine (ACh) to acetate and choline. AChE is located at the synaptic cleft and functions to terminate synaptic transmission by catalyzing the breakdown of ACh allowing cholinergic neurons to Description：Acetylcholinesterases (AChEs) are enzymes that hydrolyze the neurotransmitter acetylcholine (ACh) to acetate and choline. AChE is located at the synaptic cleft and functions to terminate synaptic transmission by catalyzing the breakdown of ACh allowing cholinergic neurons to return to a resting state after activation. It is also found in membranes of red blood cells, motor and sensory fibers, muscles, nerves and central and peripheral tissues. Changes in AChE activity may result from exposure to certain insecticides, which act as cholinesterase inhibitors. Inhibitors of AChE are also used to treat certain conditions such as dementia.Acetylcholinesterase activity assay kit has been used to determine the activity of acetylcholinesterase in a rat organophosphate model and in brain tissue homogenates.Principle：Acetylcholinesterase can catalyze the hydrolysis of acetylcholine to choline, and the reaction of choline with disulfide p-nitrobenzoic acid to produce 5-merhydryl-nitrobenzoic acid (TNB). The product has a characteristic absorption peak at 412 nm, and the activity of acetylcholinesterase can be characterized by the change of light absorption valueThe Dilution Calculator EquationConcentration (start)xVolume (start)= Concentration (final)× Volume (final)This equation is commonly abbreviated as: C1V1 = C2V2... Read More | Product IntroductionAlamar Blue detection reagent provides a simple, rapid, reliable and safe method for cell proliferation and cytotoxicity detection, which is suitable for high-throughput detection experiments. The main component of the detection reagent is a redox indicator. In the oxidized stateProduct IntroductionAlamar Blue detection reagent provides a simple, rapid, reliable and safe method for cell proliferation and cytotoxicity detection, which is suitable for high-throughput detection experiments. The main component of the detection reagent is a redox indicator. In the oxidized state, it appears purple-blue and non-fluorescent, while in the reduced state, it turns into a reduction product with pink or red fluorescence, with an absorption peak of 530-560nm and an emission peak of 590nm.In the process of cell proliferation, the ratios of NADPH/NADP, FADH/FAD, FMNH/FMN and NADH/NAD in the cell increase and are in a reducing environment. The dye taken into the cell is reduced by these metabolic intermediates and cytochromes and then released outside the cell and dissolved in the culture medium, changing the culture medium from non-fluorescent indigo blue to fluorescent pink. Finally, use an ordinary spectrophotometer or fluorophotometer for detection, and the absorbance and fluorescence intensity are proportional to the number of active cells.Instructions1. Add 10µl of detection reagent to 100µl of cell suspension, and incubate in a cell incubator for 2-6 hours. The color of the medium changes from indigo blue to pink and you can proceed to the next step.2. It is recommended to use a fluorescence microplate reader for detection, the excitation light wavelength is between 530-560 nm, the emission light wavelength is 590 nm, and the relative fluorescence unit (RFU) is recorded.3. Draw a standard curve or cell growth curve: the ordinate (Y axis) is the relative fluorescence unit (RFU); the abscissa (X axis) is the cell number or time point or drug concentration.Precautions1. The appropriate density of cells can increase the detection sensitivity. For 96-well plates, we recommend seeding 100 microliters of cells per well. The cell concentration range is: 100-10,000/well for adherent cells, 2,000-50,000/well for suspension cells, and medium as a blank control. For 384-well plates, the cell concentration and seeding volume are both halved.2. The whole process should be aseptic operation, because microbial contaminants can also reduce the detection reagents and affect the experimental results.3. Pay attention to the concentration of inoculated cells and the incubation time after adding detection reagents. If the cell concentration is too high or the incubation time is too long, it will cause a secondary reduction reaction, resulting in colorlessness and disappearance of fluorescence.4. When incubating, avoid light.5. This product can use fluorescence or spectrophotometric detection, but the sensitivity of fluorescence is high, and the experimental error is small. Fluorescence detection is recommended... Read More | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export | Product contentS666146Component50 T200 TStorageS666146ABuffer GR25 mL120 mLRTS666146BBuffer GL25 mL120 mLRTS666146CBuffer GW1 (concentrate)13 mL52 mLRTS666146DBuffer GW2 (concentrate)15 mL75 mLRTS666146EBuffer GE15 mL60 mLRTS666146FProteinase K1.25 mL4×1.25 mLRTS666146GSpin Columns DS with Product contentS666146Component50 T200 TStorageS666146ABuffer GR25 mL120 mLRTS666146BBuffer GL25 mL120 mLRTS666146CBuffer GW1 (concentrate)13 mL52 mLRTS666146DBuffer GW2 (concentrate)15 mL75 mLRTS666146EBuffer GE15 mL60 mLRTS666146FProteinase K1.25 mL4×1.25 mLRTS666146GSpin Columns DS with Collection Tubes50 sets 200 setsRTS666146HCentrifuge Tubes (1.5 mL)50 EA200 EARTProductsThis kit provides a simple and rapid method for the isolation and purification of total DNA from buccal swab samples. The kit adopts a silica matrix membrane that can specifically bind DNA and a unique buffer system to adsorb DNA efficiently and specifically, and 0.5-3.5 µg of genomic DNA can be obtained from each swab, and the extracted DNA fragments are large, pure and of stable and reliable quality. It is suitable for enzyme digestion, PCR, library construction, Southern hybridization and other experiments.Self-contained reagent: anhydrous ethanol.Pre-experiment Preparation and Important Notes1. Anhydrous ethanol should be added to Buffer GW1 and Buffer GW2 according to the instructions on the label of the reagent bottle before first use.2. If precipitation is found in Buffer GL before use, dissolve Buffer GL in a 56°C water bath.3. All centrifugation steps can be performed at room temperature.4. Sampling: Use a buccal swab to wipe the inside of the mouth 6 times, dry for 2 hours and store. To ensure that the sample is not contaminated by food or drink, do not eat or drink for 30 minutes before sampling.Procedure1. The swab of the buccal swab was cut from the rod with scissors and placed in a 2mL centrifuge tube (supplied) and 400µL Buffer GR was added.Note: For genomic DNA without RNA contamination, add 4 µL of RNase A solution at a concentration of 100 mg/ml and shake to mix.2. Add 20 µL of Proteinase K and 400 µL of Buffer GL, immediately vortex and shake for 15 seconds and mix thoroughly.Note: Mix well immediately after adding Buffer GL; do not add Proteinase K directly to Buffer GL for use.3.56°C for 10 minutes and centrifuge briefly so that the solution on the walls of the tube collects at the bottom.4. Add 400 µL of anhydrous ethanol, vortex and shake to mix thoroughly, and centrifuge briefly so that the solution on the wall of the tube collects at the bottom of the tube.Note: The addition of anhydrous ethanol may produce a white precipitate that will not affect subsequent experiments.5. Add the solution and precipitate obtained in the previous step to the Spin Columns DS in two batches of up to 700 µL at a time into the collection tube. centrifuge the column at 12,000 rpm (∼13,400 × g) for 1 minute, pour off the waste liquid from the collection tube, and return the column to the collection tube.6. Add 500 µL of Buffer GW1 to the adsorbent column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorbent column back into the collection tube.7. Add 500 µL of Buffer GW2 to the adsorption column (check that anhydrous ethanol has been added before use), centrifuge the column at 12,000 rpm for 3 minutes, pour off the waste liquid in the collection tube, and put the column back into the collection tube.Note: Step 7 can be repeated if further DNA purity is required.8. Centrifuge at 12,000 rpm for 1 minute and pour off the waste liquid in the collection tube. Leave the adsorption column at room temperature for several minutes to dry thoroughly.Note: The purpose of this step is to remove residual ethanol from the adsorption column, which can interfere with subsequent enzymatic reactions (digestion, PCR, etc.).9. Place the adsorption column in a new 1.5 mL centrifuge tube, add 50 µL of Buffer GE or sterilized water to the middle of the adsorption column overhanging the column, let stand at room temperature for 2-5 minutes, centrifuge at 12,000 rpm for 1 minute, collect the DNA solution, and store at -20℃.Attention:(1) If the downstream experiment is sensitive to pH or EDTA, it can be eluted with sterilized water. The pH value of the eluent has a great influence on the elution efficiency. If the eluent is made of water, the pH value should be 7.0-8.5 (the pH value of water can be adjusted to this range by using NaOH), and the elution efficiency is not high when the pH value is lower than 7.0.2) For long-term storage, it is recommended to elute with Buffer GE and store at -20°C... Read More |