| Description | Free Fatty Acids (FFA), also known as Non-Esterified Fatty Acids (NEFA), are primarily produced by the hydrolysis of neutral fats. They are intermediate products in fat metabolism, involved in cell proliferation, inflammatory responses, and hormone regulation. FFA can also act as signaling moleculesFree Fatty Acids (FFA), also known as Non-Esterified Fatty Acids (NEFA), are primarily produced by the hydrolysis of neutral fats. They are intermediate products in fat metabolism, involved in cell proliferation, inflammatory responses, and hormone regulation. FFA can also act as signaling molecules with various physiological functions. Free fatty acids are closely related to lipid metabolism, glucose metabolism, and endocrine function. Their concentration is an important physiological and biochemical indicator, serving as an auxiliary parameter for disease evaluation and diagnosis, and also reflecting quality changes during food storage.Detection Principle: FFAs combine with copper ions to form copper soaps, which are soluble in chloroform. The copper ions can then react with a chromogenic solution to form a purplish-red complex. This product has a characteristic absorption peak at 550 nm. The FFA content can be quantified by measuring the change in absorbance.Detection Range: 0.0313 - 2 mMSensitivity: 0.0156 mMApplicable Samples: Serum (plasma), animal/plant tissues, cells, bacteria.A1492746Component48T96TStorageA1492746ACu Reagent6 mL12 mL2-8℃. Store in the dark.A1492746BChromogen15 mL30 mL2-8℃. Store in the dark.A1492746CStandard (16.41 mg Palmitic Acid)1 EA1 EA2-8℃. Store in the dark.User-Prepared Instruments and ReagentsMicroplate reader or visible spectrophotometer (capable of measuring absorbance at 550 nm)Incubator, Ice maker, Low-temperature centrifuge96-well plate or micro glass cuvettes, Adjustable pipettes and tipsHomogenizer (for tissue samples)Glass bottle (for preparing extraction buffer)n-Heptane, Anhydrous methanol, ChloroformExperimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsExtraction Buffer (Self-prepared)In a glass bottle, mix Chloroform : n-Heptane : Anhydrous Methanol = 28 : 21 : 1. Cap tightly and mix well.Store at 4°C protected from light.Cu ReagentReady-to-use; equilibrate to room temperature before use; mix well before use.Store at 4°C protected from light.ChromogenReady-to-use; equilibrate to room temperature before use.Store at 4°C protected from light.StandardBefore use, dissolve contents in 1 mL of Extraction Buffer to obtain a 64 mM Standard solution. Mix well.Unused dissolved Standard can be stored in a tightly sealed glass bottle at 4°C protected from light for 1 month.2. Standard Curve SetupDilute the 64 mM Standard further with Extraction Buffer as shown in the table below.Standard No.Standard (µL)Extraction Buffer Volume (µL)Standard Concentration (mM)Std.120µL of 64mM stock6202Std.2100µL of Std.11001Std.3100µL of Std.21000.5Std.4100µL of Std.31000.25Std.5100µL of Std.41000.125Std.6100µL of Std.51000.0625Std.7100µL of Std.61000.0313Note: Prepare freshly diluted standards for each experiment.3. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for up to 6 months.3.1 Animal Tissues: Weigh approximately 0.1 g of tissue, add 1 mL of Extraction Buffer, and homogenize on ice. Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.2 Plant Tissues: Weigh approximately 0.1 g of tissue, add 1 mL of Extraction Buffer, and grind. Disrupt by ultrasonic homogenization on ice (power 20% or 200 W, ultrasonicate for 3 s, interval 7 s, repeat 30 times). Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.3 Cells or Bacteria: Collect 5 million cells or bacteria into a centrifuge tube. Wash with cold PBS, centrifuge, and discard the supernatant. Add 1 mL of Extraction Buffer. Disrupt by ultrasonic homogenization on ice (power 20% or 200 W, ultrasonicate for 3 s, interval 7 s, repeat 30 times). Centrifuge at 8,000 rpm, 4°C for 10 min. Collect the supernatant and keep on ice for detection.3.4 Serum (Plasma) and other liquids: Detect directly.4. Assay Steps4.1 Instrument Preparation: Preheat the microplate reader or visible spectrophotometer for at least 30 minutes. Set the wavelength to 550 nm. For spectrophotometers, zero the instrument with deionized water.4.2 Sample Assay (Add reagents sequentially to EP tubes):ReagentBlank Tube (µL)Standard Tube (µL)Test Tube (µL)Extraction Buffer240200200Various Std.0400Sample0040Cap the tubes tightly and vortex at medium speed for 30 seconds.Cu Reagent808080Cap the tubes tightly and vortex at medium speed for 30 seconds. Incubate at room temperature (25°C) for 20 minutes. Centrifuge at 2,000 g, room temperature (25°C) for 5 minutes.Upper Phase505050Chromogen2002002004.3 Incubate at room temperature (25°C) for 5 minutes. Transfer 200 µL from each tube to the corresponding wells of a 96-well plate or micro glass cuvettes. Measure the absorbance at 550 nm.Calculate ΔAtest=Atest-Ablank and ΔAstd=Astd-Ablank (The blank tube only needs to be set up once).Note: The measurement must be completed within 30 minutes after color development. It is recommended to perform preliminary experiments with 2-3 samples expected to have significant differences before formal testing. If Atest exceeds the detection range of the instrument, dilute the sample further with Extraction Buffer and multiply the result by the dilution factor.5. Result CalculationWe provide both derived and simplified calculation formulas, which are equivalent. The simplified formulas in bold are recommended as the final calculation formulas.5.1 Standard Curve PlottingPlot the standard curve with standard concentration as the y-axis and ΔAstd as the x-axis (using concentration as the y-axis facilitates calculation). Substitute ΔAtest into the standard curve equation to obtain y (mM).5.2 Sample FFA Content Calculation(1) Based on sample mass:FFA Content (µmol/g fresh weight) = y × Vextract ÷ W × n = y ÷ W × n(2) Based on bacterial or cell count:FFA Content (µmol/10⁴ cells) = y ÷ (Cell or Bacterial Count ÷ Vextract ) × n = y ÷ 500 × n = 0.002 × y × n(3) Based on liquid volume:FFA Content (µmol/L) = 1000 × y × nParameter Description:Vextract : Volume of Extraction Buffer added, 1 mLW: Sample mass, gn: Sample dilution factor (if further diluted)500: Cell or bacterial count, in units of 10⁴1000: Unit conversion factor, 1 L = 1000 mL6. Result PresentationTypical Standard Curve: y = 0.679x - 0.0109, R² = 0.9988(Free Fatty Acid (FFA) standard curve analyzed using a 96-well plate. Data and curve are for reference only; users must establish their own standard curve based on their experiment.)Precautions1. Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please implement appropriate biosafety precautions throughout the experiment. Wear personal protective equipment such as lab coats, masks, gloves, and hair caps. Perform experiments in a fume hood or biosafety cabinet.2. This product is for scientific research use only. Not intended for clinical diagnosis... Read More | Inquire | Inquire | Product introduction：Used to isolate lymphocytes from human organsMatters needing attention：1. samples, reagents and experimental environment in the whole process shall be carried out at 20 ± 2 ℃. In order to obtain the best experimental results, it is best to carry out the Product introduction：Used to isolate lymphocytes from human organsMatters needing attention：1. samples, reagents and experimental environment in the whole process shall be carried out at 20 ± 2 ℃. In order to obtain the best experimental results, it is best to carry out the experiment within 2 h of sampling. The longer the sample is stored, the worse the cell separation effect is. The separation effect is even worse after the sample is placed for more than 6 h, or even cannot achieve the purpose of separation. 2. in this experiment, it is better not to use plastic products with high polymerization materials (such as polystyrene), but use non-static, low static ionization heart tubes and glass products without alkali treatment, because the electrostatic effect will lead to cell adhesion, and the surface of alkali treated glass will become rough, which will affect the effect of cell separation. 3. aspirating too many lymphocyte layers and separation liquid layers will cause the granulocytes at the junction of separation liquid to be aspirated, thus increasing the number of mixed granulocytes. 4. when the amount of separating solution is greater than that of tissue single cell suspension sample, the separation effect is better.Scope of application：Lymphocyte isolation... Read More | Product contentU665751Component100 TStorageU665751A2×UltraSYBR One Step Buffer1.4 mL-20℃. Avoid freeze/ Thaw cycle. Protect from light.U665751BUltraSYBR One Step EnzymeMix50 µL-20℃. Avoid freeze/ Thaw cycle. Protect from light.U665751C50×High ROX50 µL-20℃. AvoidProduct contentU665751Component100 TStorageU665751A2×UltraSYBR One Step Buffer1.4 mL-20℃. Avoid freeze/ Thaw cycle. Protect from light.U665751BUltraSYBR One Step EnzymeMix50 µL-20℃. Avoid freeze/ Thaw cycle. Protect from light.U665751C50×High ROX50 µL-20℃. Avoid freeze/ Thaw cycle. Protect from light.U665751DRNase-Free Water1.5 mL-20℃. Avoid freeze/ Thaw cycle. Product Introduction This product is a specialized kit for one-step Real-Time RT-qPCR. The SYBR Green I fluorescent dye contained can bind to all double-stranded DNA, allowing this product to be used for the detection of many different target sequences without the need to synthesize specific labeling probes. Real Time RT-qPCR reaction using this product, reverse transcription and quantitative PCR are carried out in the same reaction system, there is no need to add reagents during the reaction, no need to open the cap of the tube, avoiding contamination while improving the efficiency of the experiment. The new high-efficiency reverse transcriptase RNase H is activity-deficient, which reduces the degradation of RNA in the reverse transcription reaction. The enzyme has high reverse transcription efficiency and can perform a good reverse transcription reaction on a small amount of RNA template. It has high affinity to RNA and can read through RNA templates with high GC content and complex secondary structure. New efficient hot start enzyme, the enzyme activity is closed at room temperature, thus effectively avoiding non-specific amplification caused by non-specific binding of primers and templates or primer dimerization at room temperature, which greatly improves the accuracy of fluorescence quantitative PCR reaction. The included buffer system maximizes the efficacy of both enzymes at the same time and improves efficiency. This product has high sensitivity, high specificity, wide linear range, and more accurate quantification of target genes.ROX dye is used to correct the fluorescence signal error generated between wells of a quantitative PCR instrument, and is generally used with Real Time PCR amplifiers from ABI, Stratagene, and other companies. The excitation optics vary from instrument to instrument, so the concentration of ROX dye must be matched to the corresponding fluorescence quantitative PCR instrument. Instruments that do not require ROX calibration (U665567) Roche LightCycler 480, Roche LightCyler 96, Bio-rad iCyler iQ, iQ5, CFX96 and others. Instruments that require High ROX calibration (U665751) ABI Prism 7000/7300/7700/7900, Eppendorf, ABI Step One/Step One Plus, and others.matters needing attention1. Before using the reagents in this kit, please mix them gently by turning them up and down to avoid foaming as much as possible, and use them after brief centrifugation.2. This product uses RNA as the template for one-step RT-PCR experiment, RNase contamination should be avoided during operation, it is recommended to operate RNA in a special area, use special instruments and consumables, the operator with a mask and disposable gloves and often change the gloves, the experiment-related consumables should be processed with 0.1% DEPC (diethyl ether of pyrocarbonate) aqueous solution at 37℃ for 12 hours and autoclaved for 30 minutes before use. Sterilize for 30 minutes before use.3. UltraSYBR One Step RT-qPCR Buffer contains SYBR Green I fluorescent dye. Avoid bright light when storing this product or preparing PCR reaction solutions.4. Repeated freezing and thawing of each reagent in this kit should be avoided; repeated freezing and thawing may degrade the product performance. This product can be stored for a long time at -20℃, protected from light. If frequent use is required in the short term, it can be stored at 2-8℃.5. This kit must use specific primers, the choice of primers can be selected according to specific experiments, the good or bad primer design directly affects the results of RT-PCR reaction, the design of primers need to consider the GC content, primer length, primer position, the secondary structure of the PCR product and other factors, it is recommended to use a professional primer design software for design.6. This product cannot be used for fluorescent quantitative PCR by the probe method.Usage1. Dissolve RNA template, primers, 2× UltraSYBR One Step Buffer, UltraSYBR One Step EnzymeMix and RNase-Free Water and set aside on ice.2. PCR reaction system:Reagents25 µl Reaction systemFinal concentration2×UltraSYBR One Step Buffer12.5 µl1×Forward Primer，10 µM0.5 µl0.2 µM¹⁾Reverse Primer，10 µM0.5 µl0.2 µM¹⁾UltraSYBR One Step EnzymeMix0.5 µl RNA TemplateX µl10 pg – 100 ng50×Low ROX or High ROX（optional）2）0.5 µl1×RNase-Free Waterup to 25 µlNote: 1) Usually, the primer concentration of 0.2µM can get better results, and the final concentration of 0.1-0.5µM can be used as a reference for setting the range. If the amplification efficiency is not high, the concentration of primer can be increased; when non-specific reaction occurs, the concentration of primer can be decreased, thus optimizing the reaction system.(2) The excitation optical system varies from instrument to instrument, choose to add 50×Low ROX or 50×High ROX according to the instrument using fluorescence quantification.3. Vortex and shake to mix, centrifuge briefly, and collect the solution at the bottom of the tube.4. RT-qPCR reaction conditions (fluorescence quantitative PCR is a two-step method), this program is based on the ABI 7500 fluorescence quantitative PCR instrument as an exampleNote: 1) It is recommended to use two-step PCR reaction program, if you improve the reaction specificity, you can increase the annealing temperature to 60-64 ℃ as a reference for the setting range; if you do not get good experimental results due to the use of primers with lower Tm values, etc., you can try to carry out three-step PCR amplification.(2) For melting curve analysis, please set up the program recommended by the fluorescence quantitative PCR instrument used, and this program is set up with the ABI 7500 fluorescence quantitative PCR instrument as a reference.RT-qPCR reaction conditions (fluorescence quantitative PCR was a three-step method):Note: 1) For three-step PCR amplification, please use the range of 56℃-64℃ as the setting reference for the annealing temperature.(2) For melting curve analysis, please set up the program recommended by the fluorescence quantitative PCR instrument you are using, this program is ABI750 fluorescent quantitative PCR instrument as a reference setting... Read More |