| Description | The hydroxyl radical (·OH) is the neutral form of the hydroxide ion (OH⁻) and possesses strong oxidizing capacity. Hydroxyl radicals act on biological molecules such as proteins, nucleic acids, and lipids within the body, damaging cellular structure and function, which can lead to The hydroxyl radical (·OH) is the neutral form of the hydroxide ion (OH⁻) and possesses strong oxidizing capacity. Hydroxyl radicals act on biological molecules such as proteins, nucleic acids, and lipids within the body, damaging cellular structure and function, which can lead to metabolic disorders and disease. The hydroxyl radical scavenging capacity is a key indicator of antioxidant ability and is widely used in research on antioxidant health products and pharmaceuticals.Detection Principle: H₂O₂/Fe²⁺ generates hydroxyl radicals via the Fenton reaction. Salicylic acid effectively captures these generated hydroxyl radicals and reacts with them to produce a purple compound, 2,3-dihydroxybenzoic acid. When a substance capable of scavenging hydroxyl radicals is added, it inhibits the formation of this purple product. Therefore, a darker color indicates a higher hydroxyl radical content, and vice versa. The change in absorbance at 520 nm is measured to calculate the sample's hydroxyl radical scavenging capacity.Applicable Samples: Animal and plant tissues, serum (plasma), cells, bacteria, cell culture supernatants, fruit juice, honey, urine, and other samples.P1501782Component48 T96 TStorageP1501782AFerrous Salt10 mL20 mL2-8℃. Store in the dark.P1501782BH₂O₂5 mL10 mL2-8℃. Store in the dark.P1501782CSalicylic Acid10 mL20 mL2-8℃. Store in the dark.Please check the quantities of all components before starting the experiment.An additional 10% of each component is provided beyond the specified volumes for standard curve preparation or preliminary experiments.User-Prepared Instruments and ReagentsTypeNameNotesInstrumentMicroplate ReaderCapable of measuring absorbance at 520 nm.Consumables96-well MicroplateStandard microplate.ReagentsPBS (pH7.4)For washing samples.OthersHomogenizer (for tissue samples), Incubator, Ice Box, Refrigerated Centrifuge, Adjustable Micropipettes and TipsUsing a multi-channel pipette can improve efficiency for large-scale assays.Experimental Procedure1. Reagent PreparationReagent NameReagent PreparationNotesFerrous SaltReady-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light. Corrosive. Use appropriate personal protective equipment.H₂O₂Ready-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light.Salicylic AcidReady-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light. Irritating to skin and mucous membranes. Use appropriate personal protective equipment.2. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for one month. To compare the hydroxyl radical scavenging capacity of different samples, the dilution factor must be the same for the same batch of samples, and extracts or drugs should be prepared at the same concentration.2.1 Animal Tissue SamplesWeigh approximately 0.1 g of tissue, add 1 mL of deionized water, and homogenize in an ice bath. Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.2 Plant Tissue SamplesWeigh approximately 0.1 g of tissue, add 1 mL of deionized water and grind. Sonicate in an ice bath for 5 minutes (power 20% or 200W, pulse 3s on, 7s off, repeat 30 times). Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.3 Cells or BacteriaCollect 5×10⁶ cells or bacteria into a centrifuge tube. Wash with pre-cooled PBS, centrifuge, and discard the supernatant. Add 1 mL of deionized water. Sonicate in an ice bath for 5 minutes (power 20% or 200W, pulse 3s on, 7s off, repeat 30 times). Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.4 Serum (Plasma) and Other Protein-Rich or Turbid LiquidsTake 0.1 mL of sample, add 1 mL of deionized water and mix well. Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.5 Honey, Urine, and Other Clear Liquids with Low Protein ContentAssay directly.2.6 Extracts or DrugsCan be prepared to a specific concentration, e.g., 0.5 mg/mL.3. Assay Steps3.1 Microplate Reader Preparation: Preheat for at least 30 minutes. Set the wavelength to 520 nm.3.2 Assay System Setup: Perform the following operations in a 96-well plate. The Blank and Standard wells only need to be set up 1-2 times. Each test well requires a corresponding control well.ReagentBlank Well (µL)Standard Well (µL)Test Well (µL)Control Well (µL)Ferrous Salt40404040H₂O₂040400Deionized Water120804080Salicylic Acid40404040Sample0040403.3 Absorbance Measurement: Mix well, incubate at 37°C for 20 minutes. Read the absorbance at 520 nm, recorded as A blank, A standard, A test, and A control respectively.4. Calculation of ResultsBoth the derived formula and the simplified formula provided below are equivalent.4.1 Data ProcessingCalculate ΔA test = A test - A control Calculate ΔA standard = A standard - A blank 4.2 Calculation of Hydroxyl Radical Scavenging RateHydroxyl Radical Scavenging Rate D% = (ΔA standard - ΔA test ) / ΔA standard × 100%5. Representative ResultsExample: 0.1 g of nectarine pulp was taken and assayed according to the procedure using a 96-well plate.Measured: ΔA standard = A standard - A blank = 1.020 - 0.051 = 0.969ΔA test = A test - A control = 0.465 - 0.052 = 0.413Calculated Hydroxyl Radical Scavenging Rate D% = (0.969 - 0.413) / 0.969 × 100% = 57.38%Precautions1. Before formal testing, it is recommended to perform a preliminary test with 2-3 samples expected to have significant differences.2. For tissue samples, cell samples, etc., results can be normalized between samples by measuring protein concentration. Aladdin's BCA Protein Quantification Kit (B665595) or Ready-to-Use BCA Protein Quantification Kit (R1491648) is recommended.3. This kit is compatible with spectrophotometer detection. Adjust the reagent preparation volumes proportionally according to the spectrophotometer's requirements.4. Biochemical reagents are generally irritating and potentially biologically toxic. For your safety and health, implement appropriate biosafety precautions throughout the experiment, including wearing lab coats, masks, gloves, and head covers. Perform experiments in a fume hood or biosafety cabinet.5. This product is for research use only. Not for use in clinical diagnosis.Frequently Asked QuestionsQ: What should I do if the measured ΔA test for the sample is too high or too low?A: If ΔA test < 0.02, appropriately increase the sample volume and re-run the assay. If ΔA test > ΔA standard, further dilute the sample with deionized water or reduce the amount of sample used for extraction, and re-run the assay... Read More | This reagent kit is for research purposes only. Purpose of use: This reagent kit is used to determine the content of lactose in serum, plasma, and related liquid samples.Experimental principle:This kit applies enzyme-linked immunosorbent assay to determine the level of lactose in the sample. This reagent kit is for research purposes only. Purpose of use: This reagent kit is used to determine the content of lactose in serum, plasma, and related liquid samples.Experimental principle:This kit applies enzyme-linked immunosorbent assay to determine the level of lactose in the sample. Purified lactose antibodies were coated on a microplate to produce solid-phase antibodies. Lactose was added to the microplate of the coated monoclonal antibody, along with HRP labeled lactose antigens, to compete for binding. After thorough washing, the substrate TMB was added for colorimetry. The depth of sample color is negatively correlated with the content of lactose in the sample. Measure the absorbance (OD value) at a wavelength of 450nm using an enzyme-linked immunosorbent assay (ELISA) reader, and calculate the content of lactose in the sample through a standard curve.Kit composition:130times concentrated washing solution20ml×1 bottle8.1Standard S1（80µg/L）0.5ml×1bottle2Enzyme-linked immunosorbent assay6ml×1 bottle8.2Standard S2（40µg/L）0.5ml×1bottle3Enzyme labeling coated plate96 holes x 1 pieces8.3Standard S3（20µg/L）0.5ml×1bottle4Color reagent A solution6ml×1 bottle8.4Standard S4（10µg/L）0.5ml×1bottle5Color developer B solution6ml×1 bottle8.5Standard S5（5µg/L）0.5ml×1bottle6Stop solution6ml×1 bottle9Instructions1 copy7Sample Diluent6ml×1 bottle10Microplate Sealers2 sheetsSpecimen requirements:1. Specimen processing:(1) After collecting the water sample, it is repeatedly freeze-thawed three times at -20 ℃, and then filtered through glass fiber for future reference(2) The tissue samples should be extracted using butanol: methanol: water (5:25:70 V: V: V), or extracted according to relevant literature. The experiment should be conducted as soon as possible after extraction. If the experiment cannot be conducted immediately, the specimen can be stored at -20 ℃ for future reference2. Samples containing NaN3 cannot be detected as NaN3 inhibits the activity of horseradish peroxidase (HRP).Operation steps:1. Sample addition: Set up standard wells, blank wells (blank control wells do not include samples and enzyme-linked immunosorbent assay reagents, the other steps are the same), and sample wells to be tested. Add 50 microliters to the standard well on the enzyme-linked immunosorbent assay (ELISA) plate, and first add 40 diluents to the sample well to be tested µ l. Then add 10 more samples to be tested µ L (The final dilution of the sample is 5 times). Add the sample to the bottom of the enzyme-linked immunosorbent assay (ELISA) plate well, avoiding touching the well wall as much as possible. Gently shake and mix well.2. Enzyme addition: Add 50 enzyme labeled reagents to each well µ l. Excluding blank holes.3. Warm incubation: Seal the plate with a sealing film and incubate at 37 ℃ for 60 minutes.4. Solution preparation: Dilute 30 times the concentrated washing solution with distilled water and set aside for later use5. Washing: Carefully remove the sealing film, discard the liquid, shake dry, fill each well with washing solution, let it stand for 30 seconds, then discard. Repeat this process 5 times and pat dry.6. Color development: Add color development agent A50 to each well first µ l. Add color developer B50 again µ l. Gently shake and mix well, and develop color at 37 ℃ in the dark for 15 minutes7. Termination: Add 50% termination fluid to each hole µ l. Terminate the reaction (at this point, the blue color immediately turns yellow).8. Measurement: Zero the blank hole and sequentially measure the absorbance (OD value) of each hole at a wavelength of 450nm. The measurement should be conducted within 15 minutes after adding the termination solution.Calculation:Draw a standard curve on a coordinate paper with the concentration of the standard substance as the x-axis and the OD value as the y-axis. Based on the OD value of the sample, determine the corresponding concentration from the standard curve; Multiply it by the dilution factor; Alternatively, a linear regression equation can be used to calculate the standard curve using the concentration and OD value of the standard substance. The OD value of the sample can be substituted into the equation to calculate the sample concentration, which is then multiplied by the dilution factor to obtain the actual concentration of the sample.Notes:1. The kit should be balanced at room temperature for 15-30 minutes before use when taken out from the cold storage environment. If the enzyme coated plate is not used up after opening, the Flat noodles should be stored in a sealed bag.2. Concentrated detergent may precipitate crystals. When diluted, it can be heated in a water bath to aid in dissolution. Washing does not affect the results.3. A sampler should be used for each step of sample addition, and its accuracy should be regularly calibrated to avoid experimental errors. It is best to control the sample addition time within 5 minutes. If there are a large number of specimens, it is recommended to use a firing gun for sample addition.4. Please make a standard curve at the same time as each measurement, preferably with a re hole. If the content of the substance to be tested in the sample is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please dilute the sample diluent by a certain multiple (n times) before measurement. When calculating, please multiply the total dilution multiple (x n x 5).5. The sealing film is only for one-time use to avoid cross contamination.6. Please store the substrate in dark.7. Strictly follow the instructions and determine the test results based on the reading of the enzyme-linked immunosorbent assay (ELISA) reader8. All samples, washing liquids, and various waste should be treated as infectious substances.9. The components of this reagent with different batch numbers shall not be mixed.Detection range:two µ G/L-90 µ G/L... Read More | Product content: M665794Component125 TStorageM665794A2×miRNA qPCR Mixture (ROX)2×750 µL-20℃. Avoid freeze/thaw cycleM665794BReverse Primer, 10 µM60 µL-20℃. Avoid freeze/thaw cycleM665794CddH2O1.5 mL-20℃. Avoid freeze/thaw cycle Product Introduction:This kitProduct content: M665794Component125 TStorageM665794A2×miRNA qPCR Mixture (ROX)2×750 µL-20℃. Avoid freeze/thaw cycleM665794BReverse Primer, 10 µM60 µL-20℃. Avoid freeze/thaw cycleM665794CddH2O1.5 mL-20℃. Avoid freeze/thaw cycle Product Introduction:This kit uses the principle of SYBR Green I chimeric fluorescent dye method for miRNA fluorescence quantitative PCR detection. The kit includes 2 x miRNA qPCR Mixture and Reverse Primer required for detection. 2 x miRNA qPCR Mixture is a new generation pre mixed form of fluorescence quantitative PCR detection reagent specially developed for miRNA quantitative detection. The fluorescent dye SYBR Green I contained in it can bind to all double stranded DNA, making the product suitable for detecting different target sequences without the need to synthesize specific labeled probes. The GoldStar Taq DNA polymerase is a chemically modified and highly efficient thermal starter enzyme, coupled with a unique buffer system, which enhances reaction specificity, sensitivity, and enables accurate quantification of miRNA over a wider range. The 2x miRNA qPCR Mixture contains ROX dye and is suitable for fluorescence quantitative PCR instruments that require ROX as a calibration dye.Note: This kit must be used in conjunction with the miRNA cDNA first strand synthesis kit.Self prepared experimental materials: qPCR upstream primer.Forward Primer design principles:1. Follow the most common principles of primer design.2.Based on mature miRNA sequences, replacing U with T is the most basic and simplest design method.3.The Tm value of the downstream primer provided in the reagent kit is 63.6 ℃, and the Tm value of the upstream primer should be designed to be around 63.6 ℃ as much as possible.4. If the Tm value of the primer directly designed according to principle "2" is too low, several bases (preferably G or C bases) can be added to the 5 'end of the primer; One or several A bases can also be added at the 3 'end; Alternatively, both the 5 'and 3' ends can be modified simultaneously.5.If the Tm value of a primer designed directly according to principle "2" is too high, several bases can be removed from the 5 'or 3' end of the primer.Notes:1. Before using the reagent, please gently mix it upside down to avoid foaming, and use it after a brief centrifugation.2. The amount of miRNA first strand cDNA added should not exceed 10% of the volume of Real time PCR.3. For special detection systems, high content of cDNA templates can easily lead to non-specific amplification. Dilute cDNA appropriately (10 or 100 times dilution) based on the abundance of detected miRNAs.4. The 2x miRNA qPCR Mixture in this product contains SYBR Green I and ROX dyes. When storing this product or preparing PCR reaction solution, strong light exposure should be avoided.5. Avoid repeated freezing and thawing of this product. Repeated freezing and thawing may cause a decrease in product performance. This product can be stored at -20 ℃ for long-term storage. If frequent use is required in the short term, the 2xmiRNA qPCR Mixture can be stored at 2-8 ℃. However, the Reverse primer still needs to be stored at -20 ℃.Operation steps:1. Melt 2 x miRNA qPCR Mixture and Reverse Primer at room temperature (10 µ M). 2. When using, please gently mix the 2x miRNA qPCR Mixture upside down to avoid foaming, and use after brief centrifugation. If the reagent is not well mixed, its reaction performance will decrease.3. Place the reagent on ice and prepare the reaction system according to the following table: reagent volume final concentration 2×miRNA qPCR Mixture（ROX） 10 µl 1× Forward primer（10 µM） 0.4µl 0.2 µM Reverse primer（10 µM） 0.4µl 0.2 µM MiRNA first strand cDNA X µl — ddH2O up to 20 µl —4. The reaction program is set as follows:Attention!The pre denaturation reaction of this product must be completed at 95 ℃ for 10 minutes! Note: 1) The hot start enzyme used in this product must be activated under pre denaturation conditions of 95 ℃ and 10 minutes.2) The annealing temperature should be set at 60-64 ℃ as a reference range. When non-specific reactions occur, the annealing temperature can be increased... Read More | Products contentNote: The amount of individual primers used is 1 µl, each N7-end primer can perform 10 DNA library constructs, and each kit can perform 240 DNA library constructs.Products IntroductionThis kit is a companion kit to the transposase-based Rapid DNA Library Construction Kit for Products contentNote: The amount of individual primers used is 1 µl, each N7-end primer can perform 10 DNA library constructs, and each kit can perform 240 DNA library constructs.Products IntroductionThis kit is a companion kit to the transposase-based Rapid DNA Library Construction Kit for Illumina platform library construction. Each kit contains one N5 primer and 24 N7 primers, which can be used to prepare 24 different single-ended Index libraries. All reagents provided in the kits have been subjected to stringent quality control and functional validation to maximize the stability and reproducibility of library construction. The libraries can be used for sequencing on Illumina platforms such as HiSeq X-10/4000/2500/2000 and MiSeq. Provide your own instruments, reagents and consumables1. Magnetic frame: DynaMagTM-2 is recommended.2. DNA purification and recovery kit: It is recommended to use Kangwei DNA purification and recovery kit by magnetic bead method.3. DNA building kit: It is recommended to use the Kangwei Century transposase method second-generation sequencing rapid DNA building kit.4. Anhydrous ethanol.5. Reaction tubes: It is recommended to use low adsorption PCR tubes with 1.5 ml centrifuge tubes; Tip: It is recommended to use a high quality filter tip to prevent contamination of kits and library samples. Pre-experiment Preparation and Important NotesPlease centrifuge briefly before opening the cap so that the liquid collects at the bottom of the tube to avoid cross-contamination between different primers. procedureFor the use of the CombiVision Second Generation Sequencing Multisample Primer Kit, please follow the CombiVision Second Generation Sequencing Rapid DNA Library Kit protocol. Index N501 Primer for Illumina Index N901-N996 Primer for Illumina... Read More | The Succinic Acid (Succinate) assay kit is suitable for the specific assay of succinic acid in wine, cheese, eggs, sauce and other food products. Succinic acid (or succinate) is found in all plant and animal materials as a result of the central metabolic role played by this dicarboxylic acid in the The Succinic Acid (Succinate) assay kit is suitable for the specific assay of succinic acid in wine, cheese, eggs, sauce and other food products. Succinic acid (or succinate) is found in all plant and animal materials as a result of the central metabolic role played by this dicarboxylic acid in the Citric Acid Cycle. Succinic acid concentrations are monitored in the manufacture of numerous foodstuffs and beverages, including wine, soy sauce, soy bean flour, fruit juice and dairy products (e.g. cheese).Product Description： Succinic acid is found in all plant and animal materials as a result of the central metabolic role played by this dicarboxylic acid in the Citric Acid Cycle. Succinic acid concentrations are monitored in the manufacture of numerous foodstuffs and beverages, including wine, soy sauce, soy bean flour, fruit juice and dairy products (e.g. cheese). The ripening process of apples can be followed by monitoring the falling levels of succinic acid. The occurrence of > 5 mg/kg of this acid in egg and egg products is indicative of microbial contamination. Apart from use as a flavouring agent in the food and beverage industries, succinic acid finds many other non-food applications, such as in the production of dyes, drugs, perfumes, lacquers, photographic chemicals and coolants. Preparation Instructions：Suitable for succinate determination in food, beverage, agricultural products, and other biological samples.Note for Content：The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).Browse all of our organic acid assay kits.Principle：The Succinate Assay Kit provides a simple, one step assay for measuring succinate. In this assay succinate is converted to pyruvate which reacts with specific reagents and dye to form a colored product. The color intensity at 570 nm or fluorescencAdvantages：Extended cofactors stability. Dissolved cofactors stable for > 1 year at 4oC.Very competitive price (cost per test)All reagents stable for > 2 years as suppliedVery rapid reaction (even at room temperature)Mega-Calc™ software tool is available from our website for hassle-free raw data processingStandard includedSuitable for manual, microplate and auto-analyser formats... Read More |