| Description | The hydroxyl radical (·OH) is the neutral form of the hydroxide ion (OH⁻) and possesses strong oxidizing capacity. Hydroxyl radicals act on biological molecules such as proteins, nucleic acids, and lipids within the body, damaging cellular structure and function, which can lead to The hydroxyl radical (·OH) is the neutral form of the hydroxide ion (OH⁻) and possesses strong oxidizing capacity. Hydroxyl radicals act on biological molecules such as proteins, nucleic acids, and lipids within the body, damaging cellular structure and function, which can lead to metabolic disorders and disease. The hydroxyl radical scavenging capacity is a key indicator of antioxidant ability and is widely used in research on antioxidant health products and pharmaceuticals.Detection Principle: H₂O₂/Fe²⁺ generates hydroxyl radicals via the Fenton reaction. Salicylic acid effectively captures these generated hydroxyl radicals and reacts with them to produce a purple compound, 2,3-dihydroxybenzoic acid. When a substance capable of scavenging hydroxyl radicals is added, it inhibits the formation of this purple product. Therefore, a darker color indicates a higher hydroxyl radical content, and vice versa. The change in absorbance at 520 nm is measured to calculate the sample's hydroxyl radical scavenging capacity.Applicable Samples: Animal and plant tissues, serum (plasma), cells, bacteria, cell culture supernatants, fruit juice, honey, urine, and other samples.P1501782Component48 T96 TStorageP1501782AFerrous Salt10 mL20 mL2-8℃. Store in the dark.P1501782BH₂O₂5 mL10 mL2-8℃. Store in the dark.P1501782CSalicylic Acid10 mL20 mL2-8℃. Store in the dark.Please check the quantities of all components before starting the experiment.An additional 10% of each component is provided beyond the specified volumes for standard curve preparation or preliminary experiments.User-Prepared Instruments and ReagentsTypeNameNotesInstrumentMicroplate ReaderCapable of measuring absorbance at 520 nm.Consumables96-well MicroplateStandard microplate.ReagentsPBS (pH7.4)For washing samples.OthersHomogenizer (for tissue samples), Incubator, Ice Box, Refrigerated Centrifuge, Adjustable Micropipettes and TipsUsing a multi-channel pipette can improve efficiency for large-scale assays.Experimental Procedure1. Reagent PreparationReagent NameReagent PreparationNotesFerrous SaltReady-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light. Corrosive. Use appropriate personal protective equipment.H₂O₂Ready-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light.Salicylic AcidReady-to-use; Equilibrate to room temperature before use.Store at 4°C protected from light. Irritating to skin and mucous membranes. Use appropriate personal protective equipment.2. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for one month. To compare the hydroxyl radical scavenging capacity of different samples, the dilution factor must be the same for the same batch of samples, and extracts or drugs should be prepared at the same concentration.2.1 Animal Tissue SamplesWeigh approximately 0.1 g of tissue, add 1 mL of deionized water, and homogenize in an ice bath. Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.2 Plant Tissue SamplesWeigh approximately 0.1 g of tissue, add 1 mL of deionized water and grind. Sonicate in an ice bath for 5 minutes (power 20% or 200W, pulse 3s on, 7s off, repeat 30 times). Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.3 Cells or BacteriaCollect 5×10⁶ cells or bacteria into a centrifuge tube. Wash with pre-cooled PBS, centrifuge, and discard the supernatant. Add 1 mL of deionized water. Sonicate in an ice bath for 5 minutes (power 20% or 200W, pulse 3s on, 7s off, repeat 30 times). Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.4 Serum (Plasma) and Other Protein-Rich or Turbid LiquidsTake 0.1 mL of sample, add 1 mL of deionized water and mix well. Centrifuge at 10,000 g, 4°C for 10 minutes. Collect the supernatant and keep it on ice for assay.2.5 Honey, Urine, and Other Clear Liquids with Low Protein ContentAssay directly.2.6 Extracts or DrugsCan be prepared to a specific concentration, e.g., 0.5 mg/mL.3. Assay Steps3.1 Microplate Reader Preparation: Preheat for at least 30 minutes. Set the wavelength to 520 nm.3.2 Assay System Setup: Perform the following operations in a 96-well plate. The Blank and Standard wells only need to be set up 1-2 times. Each test well requires a corresponding control well.ReagentBlank Well (µL)Standard Well (µL)Test Well (µL)Control Well (µL)Ferrous Salt40404040H₂O₂040400Deionized Water120804080Salicylic Acid40404040Sample0040403.3 Absorbance Measurement: Mix well, incubate at 37°C for 20 minutes. Read the absorbance at 520 nm, recorded as A blank, A standard, A test, and A control respectively.4. Calculation of ResultsBoth the derived formula and the simplified formula provided below are equivalent.4.1 Data ProcessingCalculate ΔA test = A test - A control Calculate ΔA standard = A standard - A blank 4.2 Calculation of Hydroxyl Radical Scavenging RateHydroxyl Radical Scavenging Rate D% = (ΔA standard - ΔA test ) / ΔA standard × 100%5. Representative ResultsExample: 0.1 g of nectarine pulp was taken and assayed according to the procedure using a 96-well plate.Measured: ΔA standard = A standard - A blank = 1.020 - 0.051 = 0.969ΔA test = A test - A control = 0.465 - 0.052 = 0.413Calculated Hydroxyl Radical Scavenging Rate D% = (0.969 - 0.413) / 0.969 × 100% = 57.38%Precautions1. Before formal testing, it is recommended to perform a preliminary test with 2-3 samples expected to have significant differences.2. For tissue samples, cell samples, etc., results can be normalized between samples by measuring protein concentration. Aladdin's BCA Protein Quantification Kit (B665595) or Ready-to-Use BCA Protein Quantification Kit (R1491648) is recommended.3. This kit is compatible with spectrophotometer detection. Adjust the reagent preparation volumes proportionally according to the spectrophotometer's requirements.4. Biochemical reagents are generally irritating and potentially biologically toxic. For your safety and health, implement appropriate biosafety precautions throughout the experiment, including wearing lab coats, masks, gloves, and head covers. Perform experiments in a fume hood or biosafety cabinet.5. This product is for research use only. Not for use in clinical diagnosis.Frequently Asked QuestionsQ: What should I do if the measured ΔA test for the sample is too high or too low?A: If ΔA test < 0.02, appropriately increase the sample volume and re-run the assay. If ΔA test > ΔA standard, further dilute the sample with deionized water or reduce the amount of sample used for extraction, and re-run the assay... Read More | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export | Inquire | Product content： O665490Component50 TStorageO665490ABlocking Buffer500 mL2-8℃. Do not freeze.O665490BAntibody Pretreat Solution (HRP/Rabbit)5×1 mL2-8℃. Do not freeze.O665490CDilution Buffer500 mL2-8℃. Do not freeze.O665490DWash Buffer (10×)500 mL2-8℃. Do not Product content： O665490Component50 TStorageO665490ABlocking Buffer500 mL2-8℃. Do not freeze.O665490BAntibody Pretreat Solution (HRP/Rabbit)5×1 mL2-8℃. Do not freeze.O665490CDilution Buffer500 mL2-8℃. Do not freeze.O665490DWash Buffer (10×)500 mL2-8℃. Do not freeze. Product Introduction：The one-step rapid WB assay kit (rabbit) is the latest Western Blot detection kit developed by Kangwei Century, which canObtain high-quality Western Blot results within about 1 hour, with simple operation, high detection sensitivity, low background, and noAdditional secondary antibodies need to be added, with strong system stability. The conventional Western Blot indirect detection process (blocking, primary antibody binding)Combining with secondary antibodies requires a long time, a complex experimental process, and requires multi-step optimization of conditions. The protein on the glue is transferred toAfter coating the carrier membrane, incubate it with the blocking solution in the reagent kit for 5 minutes, and then incubate the carrier with the primary antibody treated with antibody reaction solutionAfter washing the membrane three times (5 minutes each time), it can undergo luminescence or color detection. This reagent kit is designed for target protein oneThe use of an experimental system derived from rabbits.Notes:1. Customers need to prepare their own rabbit source primary antibody.2. Before using Blocking Buffer blocking solution, Antibody Pretreat Solution (HRP/Rabbit) antibody reaction solution (rabbit), and Wash Buffer (10 x) rinse solution, please mix thoroughly.3. If there is precipitation in the rinsing solution when stored at 2-8 ℃, please restore it to room temperature, dissolve the precipitation, and use it normally. The 1x rinsing solution can be stored at room temperature for one month.4. It is recommended to stain the membrane with reagents such as spring red after the transfer is completed, and cut off any excess parts on the membrane to increase the efficiency of the reagents.5. The optimal dilution amount for primary antibody and antibody reaction solution HRP (rabbit) needs to be determined through preliminary experiments.6. Antibody reaction solution HRP (rabbit), antibody dilution solution, and antibody dosage can be increased or decreased proportionally according to the size of the membrane.7. The antibody dilution solution containing the first antibody can be recycled and reused once. Antibodies with low specificity and affinity are not recommended for repeated use. If the recovered antibody is used within 1-2 days and stored at 2-8 ℃ for long-term storage, please freeze it at -20 ℃ to avoid repeated freeze-thaw cycles.8. If there is a high background, please adjust the amount of antibodies and increase the number of times the film is washed.9. All reagents in the reagent kit should be stored at 2-8 ℃ to avoid freezing and thawing.Operation steps:This product is suitable for the sealing and antibody incubation steps after membrane transfer, taking a 5 cm x 8 cm membrane as an example:1. Preparation of rinsing solution: Dilute 10 ml of Wash Buffer (10 x) with distilled water to 100 ml, which is 1 x Wash Buffer. Set aside. Use 8-10 ml for each film wash.2. Sealing: After the membrane transfer is completed, immerse the membrane in 10 ml Blocking Buffer and seal at room temperature for 5 minutes.3. Rinse: Pour off the sealing solution, add 8-10 ml of 1 x Wash Buffer, and rinse at a high speed on a shaker for 1 minute.4. Prepare antibody incubation solution while washing the membrane: Take Antibody Pretreat Solution (HRP/Rabbit) 100 µ Add rabbit derived primary antibody 3-10 into the centrifuge tube µ g. Suck and beat the gun head until thoroughly mixed, and incubate at room temperature for 5 minutes. Add to 10 ml Dilution Buffer and mix well. Note: 1) The dosage of primary antibody can also be adjusted according to the dilution of the antibody. Taking the final dilution of antibodies at 1:1000 as an example, take 100 µ Add HRP (rabbit) antibody reaction solution into the EP tube and add 10 µ Add the first antibody to 10 ml of antibody diluent, mix well, and incubate at room temperature for 5 minutes. 2) If the membrane area is small, the amount of antibodies, reaction solution, and diluent can be reduced proportionally.5. After completing step 3, pour out the rinsing solution and add the antibody incubation solution mixed with primary antibody, Antibody Pretreat Solution (HRP/Rabbit), and Dilution Buffer to the membrane (ensuring that the incubation solution completely submerges the membrane surface). Incubate at room temperature on a shaker at a speed of about 60 rpm for 40 minutes.6. Discard (recover) the antibody incubation solution and rinse 3-5 times with the prepared 1 x Wash Buffer, each time for 3 minutes.7. Conduct subsequent testing. It is recommended to use ECL or DAB methods for testing.Example 1: Antigen 293T cell lysateA: Ordinary WB control: beta actin rabbit antibody (CW0097) 3.3ug incubated at room temperature for 40 minutes, washed with membrane, secondary antibody sheep anti rabbit HRP (CW0103) diluted at 1:10000, room temperature for 40 minutes, ECL (CW0049) exposed Example 2 Antigen is 293T cell lysateC: Ordinary WB control: PAK1, Epitomics rabbit monoclonal antibody 1:1000, incubated at room temperature for 40 minutes, washed with membrane, secondary antibody sheep anti rabbit HRP (CW0103) diluted at 1:10000, room temperature for 40 minutes, ECL (CW0049) exposedD: One step WB: Epitomics rabbit monoclonal antibody was incubated at 1:1000 room temperature for 40 minutes, and ECL (CW0049) was exposed... Read More | Inquire |