| Description | Reactive oxygen species (ROS) are natural by-products of normal oxygen metabolism, including superoxide radicals, hydrogen peroxide, and their downstream products such as peroxides and hydroxides. Studies show that over 95% of ROS in organisms originate from mitochondria. An imbalance leading Reactive oxygen species (ROS) are natural by-products of normal oxygen metabolism, including superoxide radicals, hydrogen peroxide, and their downstream products such as peroxides and hydroxides. Studies show that over 95% of ROS in organisms originate from mitochondria. An imbalance leading to oxidative stress is associated with cell growth, proliferation, development, differentiation, aging, apoptosis, and many physiological and pathological processes. Under normal conditions, a balance exists between the intracellular antioxidant defense system and oxygen free radicals, maintaining ROS at low physiological levels. Under pathological conditions, this balance is disrupted, leading to excessive intracellular ROS levels. This can damage mitochondrial enzymes, lipids, and nucleic acids, causing oxidative stress. Additionally, ROS can attack mitochondrial DNA, causing oxidative damage that leads to structural and functional changes such as reduced mitochondrial ATP synthesis and disrupted mitochondrial membrane potential. Mitochondrial Reactive Oxygen Species (ROS) Production Rate Assay Kit (Fluorometric Method) provides a simple, sensitive, and rapid method for detecting mitochondrial ROS production rate. The principle utilizes the fluorescent probe DCFH-DA for ROS detection. DCFH-DA (2',7'-Dichlorodihydrofluorescein diacetate) diffuses across the mitochondrial membrane and is hydrolyzed by esterases inside the mitochondria to form non-fluorescent DCFH. DCFH is then oxidized by ROS to generate fluorescent DCF. The rate of increase in DCF fluorescence intensity is proportional to the rate of ROS production.M1492773Component96TStorageM1492773AExtraction Buffer60 mL×22-8℃M1492773BReagentⅠ50 mL2-8℃M1492773CReagent Ⅱ1.5 mL-20℃. Store in the dark.M1492773DReagent Ⅲ1EA2-8℃. Store in the dark.M1492773EReagent Ⅳ1EA2-8℃. Store in the dark.M1492773FReagent Ⅴ1EA2-8℃. Store in the dark.M1492773GReagent Ⅵ20 µL-20℃. Store in the dark.Note: It is recommended to perform preliminary experiments using 2-3 samples expected to have significant differences before formal testing.User-Provided Instruments and ConsumablesAdjustable pipettes and tipsHomogenizer, Low-temperature centrifuge, 96-well solid black or solid white microplateConstant temperature incubator, Multifunctional microplate readerExperimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsExtraction BufferReady-to-use; equilibrate to room temperature before use.Store at 4°CReagentⅠReady-to-use; equilibrate to room temperature before use.Store at 4°CReagentⅡReady-to-useStore at -20°C protected from light.ReagentⅢPrepare before use: Dissolve contents for 96 tests in 6 mL Reagent I. Mix well.Unused dissolved Reagent III can be stored at 4°C protected from light for 1 month.ReagentⅣPrepare before use: Dissolve contents for 96 tests in 6 mL Reagent I. Mix well.Unused dissolved Reagent IV can be stored at 4°C protected from light for 1 month.ReagentⅤPrepare before use: Dissolve contents for 96 tests in 6 mL Reagent I. Mix well.Unused dissolved Reagent V can be stored at 4°C protected from light for 1 month.ReagentⅥReagent VI is somewhat irritating; personal protection is recommended during use.Working ReagentⅥPrepare before use: Dilute Reagent VI 300-fold with Reagent I according to the required volume.Diluted Working Reagent VI cannot be reused.2. Sample Preparation (Tissue/Cell Mitochondria Extraction)2.1 Weigh approximately 0.1 g of tissue or collect 5 million cells. Add 1 mL of Extraction Buffer and 10 µL of Reagent II. Homogenize on ice using a homogenizer. Centrifuge at 600 g, 4°C for 5 minutes. Collect the supernatant into a new centrifuge tube, discard the pellet.2.2 Centrifuge the supernatant again at 11,000 g, 4°C for 10 minutes. The pellet contains the extracted mitochondria.2.3 Discard the supernatant. Resuspend the pellet in 200 µL of Reagent I. Keep on ice for immediate assay.Notes:(1) Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for one month.(2) Extracted mitochondrial samples must be assayed on the same day and should not be frozen.(3) For protein concentration determination, Aladdin B774074 Bradford Protein Assay Kit or B406195 Bradford Assay Solution (Ready-to-Use) [for Protein Determination] is recommended.3. Assay Steps3.1 Pre-heat the multifunctional microplate reader to 37°C. Set the fluorescence excitation wavelength to 488 nm and emission wavelength to 525 nm.3.2 Add reagents to a 96-well solid black or solid white microplate as follows:ReagentBlank Well (µL)Test Well (µL)Sample020ReagentⅠ200ReagentⅢ5050ReagentⅣ5050ReagentⅤ5050Working ReagentⅥ30303.3 Mix well. Incubate at 37°C protected from light for 15 minutes.3.4 After incubation, measure the fluorescence intensity over 10 minutes using the microplate reader (Ex/Em = 488/525 nm). Maintain the instrument temperature at 37°C. Record the fluorescence change over 10 minutes.Notes:(1) Fluorescence intensity changes must be measured at a constant 37°C over 10 minutes.(2) When mixing with a pipette, pipette gently to avoid generating bubbles.(3) Use solid black or white 96-well plates to prevent interference between adjacent wells. 4. Result Calculation 4.1 Data Processing Perform linear regression analysis on the sampled data points (fluorescence intensity vs. time) to calculate the regression coefficient, i.e., the slope (k) of the line. The actual mitochondrial ROS production rate equals the slope (k test ) from the linear regression of the sample's fluorescence intensity vs. time data points minus the slope (k blank ) from the linear regression of the background fluorescence intensity vs. time data points. k = (RFU 10min - RFU 0min ) / 600 (assuming time in seconds; 10 min = 600 s) 4.2 Activity Calculation Note: We provide both derived and simplified calculation formulas, which are equivalent. The simplified formulas in bold are recommended as the final calculation formulas. (1) Based on sample mass: (1) Based on sample mass: ROS Production Rate (RFU/s/g fresh weight) = (k test - k blank ) ÷ (V sample ÷ V total × W) = 100 × (k test - k blank ) (2) Based on sample protein concentration: ROS Production Rate (RFU/s/mg prot) = (k test - k blank ) ÷ (V sample ÷ V total × Cpr) = 10 × (k test - k blank ) ÷ Cpr (3) Based on cell count: ROS Production Rate (RFU/s/10⁴ Cells) = (k tes t - k blank ) ÷ (500 × V sample ÷ V total ) = (k test - k blank ) ÷ 50 Parameter Description: V sample : Sample volume added, 0.02 mL V total : Total resuspension volume of the sample, 0.2 mLCpr: Sample protein concentration, mg/mLW: Sample mass, 0.1 g500: Cell count, in units of 10⁴Precautions1.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please implement appropriate biosafety precautions throughout the experiment. Wear personal protective equipment such as lab coats, masks, gloves, and hair caps. Perform experiments in a fume hood or biosafety cabinet.2.This product is for scientific research use only. Not intended for clinical diagnosis... Read More | Product content： Component G665666 200 preps Buffer P1 60ml Buffer P2 60ml Buffer E3 60ml Buffer PW (concentrate) 25ml Buffer EB 30ml RNase A (10 mg/ml) 600 µl Spin Columns DM 200 with Collection Tubes 200Product Introduction:This reagent kit is suitable for extracting 1-5 ml of Product content： Component G665666 200 preps Buffer P1 60ml Buffer P2 60ml Buffer E3 60ml Buffer PW (concentrate) 25ml Buffer EB 30ml RNase A (10 mg/ml) 600 µl Spin Columns DM 200 with Collection Tubes 200Product Introduction:This reagent kit is suitable for extracting 1-5 ml of bacterial solution. On the basis of alkaline lysis of cells, it efficiently and specifically binds plasmid DNA through a new silicon-based membrane. Each adsorption column can adsorb up to 40% µ The plasmid DNA of g is effectively removed with a special buffer system to effectively remove impurities such as proteins. The yield and purity of plasmids obtained from this kit are high, and the quality is stable. It is suitable for downstream experiments such as cell transfection, DNA sequencing, PCR, PCR based mutations, in vitro transcription, transformed bacteria, and endonuclease digestion.Self prepared reagents: anhydrous ethanol, isopropanol.Preparation and important precautions before the experiment:1. All components can be stably stored for 1 year in a dry, room temperature (15-30 ℃) environment. The adsorption column can be stored for a longer time at 2-8 ℃. 2.Buffer P1 with RNase A added can be stably stored for 6 months at 2-8 ℃. Before use, add RNase A to Buffer P1 (add all RNase A provided in the reagent kit), mix well, and store at 2-8 ℃. Before use, it is necessary to leave it at room temperature for a period of time, and then use it after returning to room temperature.3.Before the first use, anhydrous ethanol should be added to the Buffer PW according to the instructions on the reagent bottle label.4. Before use, please check if there is any crystallization or precipitation in Buffer P2 and Buffer E3. If there is any crystallization or precipitation, you can take a water bath at 37 ℃ for a few minutes to restore clarity.5. Note that Buffer P2 and Buffer E3 contain irritating substances. Please wear gloves when operating and immediately cover the lid after use.6.The amount and purity of plasmid extraction are related to factors such as bacterial culture concentration, strain type, plasmid size, and plasmid copy number.7. The maximum volume of Spin Columns DM is 750 µ l. If the sample volume is greater than 750 µ L can be added in batches.Operation steps：1. Take 1-5 ml of overnight cultured bacterial solution and add it to a centrifuge tube (provided). Centrifuge at 13000 rpm (~16200 × g) for 1 minute to collect bacteria, and try to discard all the supernatant as much as possible.2. Add 200 to the centrifuge tube containing bacterial sediment µ Buffer P1 (please check if RNase A has been added first), mix thoroughly with a pipette or vortex oscillator, and suspend bacterial precipitation.Attention: If the bacterial blocks are not thoroughly mixed, it will affect the cracking effect, resulting in low extraction amount and purity.3. Add 200 to the centrifuge tube µ Buffer P2, gently invert and mix 8-10 times to fully lyse the bacterial cells. At this point, the solution should become clear and viscous.Attention: Mix gently and do not shake vigorously to avoid interrupting genomic DNA and mixing genomic DNA fragments in the extracted plasmid. If the solution does not become clear, it indicates that the bacterial count may be too large and the lysis may not be complete. The bacterial count should be reduced or the dosage of P1, P2, E3, and isopropanol should be increased proportionally.4. Add 200 to the centrifuge tube µ Buffer E3, immediately invert and mix 8-10 times, at which point white flocculent precipitates appear. Centrifuge at 13000 rpm for 5 minutes.Attention: After adding Buffer E3, it should be mixed evenly immediately to avoid local precipitation.5. Add 260 to the spin columns DM that have been loaded into the collection tube µ After adding isopropanol, immediately add the supernatant collected in step 4 and mix it upside down.Attention: After adding isopropanol, immediately add the supernatant and mix well to avoid isopropanol dripping into the collection tube after being left for a long time. The maximum volume of the adsorption column is 750 µ l. If the sample volume is greater than 750 µ l. Isopropanol and the supernatant can be collected in a centrifuge tube (provided by oneself), mixed well, and passed through the column in batches.6.13000 rpm for 1 minute, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.7. Add 400 to the adsorption column µ L Buffer PW (please check if anhydrous ethanol has been added first), centrifuge at 13000 rpm for 1 minute, and discard the waste liquid in the collection tube.8. Place the adsorption column in a new collection tube and add 50-100 to the middle of the adsorption membrane µ Centrifuge at 13000 rpm for 1 minute using buffer EB and collect the plasmid solution into a centrifuge tube- Store the plasmid at 20 ℃.Note: 1) To increase the efficiency of plasmid recovery, the obtained solution can be added back to the adsorption column, left at room temperature for 2-5 minutes, centrifuged at 13000 rpm for 2 minutes, and collected into a centrifuge tube.2) When the plasmid copy number is low or>10 kb, preheating the buffer EB in a water bath at 65-70 ℃ can increase the extraction efficiency... Read More | Inquire | This reagent kit is based on TRIzon's improved columnar total RNA extraction kit. This product can be extracted from animal groupsExtract total RNA from samples such as textiles, plant materials, various microorganisms, and cultured cells. Firstly, the cracking solution is fully cracked This reagent kit is based on TRIzon's improved columnar total RNA extraction kit. This product can be extracted from animal groupsExtract total RNA from samples such as textiles, plant materials, various microorganisms, and cultured cells. Firstly, the cracking solution is fully cracked andHomogenized samples, in their unique high salt state, RNA specifically binds to silicon matrix membranes, greatly reducingEffectively removing organic solvent contamination while removing protein contamination, resulting in higher purity and quality of RNA. bookThe product can quickly extract total RNA from various cells or tissues, and can process 30-50 mg of tissue or 5 × 10 ⁶ cells each time,Can handle multiple different samples simultaneously. If it is an RNA experiment that is very sensitive to trace amounts of DNA, the residual DNA can be utilizedUsing DNase without RNase for digestion and removal on the column, the extracted RNA can be directly applied to RT-PCR Experiments such as Northern Blot, Dot Blot, and in vitro translation. U665516 Component 50 T Storage U665516A DNase I 1000 U -20℃. Avoid freeze/thaw cycle. U665516B 10×Reaction Buffer 1000 µL -20℃. Avoid freeze/thaw cycle. U665516C TRIzon Reagent 60 mL 2-8℃. Protect from light. U665516D TRIzon PaI™ 10 mL 2-8℃. Protect from light. U665516E Buffer RW1 40 mL RT U665516F Buffer RW2 (concentrate) 11 mL RT U665516G RNase-Free Water 10 mL RT U665516H Spin Columns RM with Collection Tubes 50 sets RT U665516I RNase-Free Centrifuge Tubes (1.5 mL) 50 EA RTPreparation and important precautions before the experiment:1.To prevent RNase pollution, attention should be paid to the following aspects:1) RNase's plastic products and gun heads to avoid cross contamination.2) Prepare the solution using water without RNase.3) Operators should wear disposable masks and gloves, and change gloves frequently during the experiment.2. The sample should avoid repeated freezing and thawing, otherwise it will affect the yield and quality of RNA extraction.3. If TRIzon Reagent is found to have precipitates before use, it can be dissolved in a water bath at 56 ℃ for a few minutes.Before the first use, anhydrous ethanol should be added to Buffer RW2 according to the instructions on the reagent bottle label.5. All centrifugation steps should be carried out at room temperature unless otherwise specified, and all operation steps should be carried out quickly.Usage：1. Sample processing1a. Organization: 30-50 mg of tissue is thoroughly ground in liquid nitrogen and 1 mL of TRIzon Reagent is added, or 1 mL of TRIzon Reagent is added to the tissue sample and homogenized. Attention: The sample volume should not exceed 10% of the volume of TRIzon Reagent.2a. Single layer cell culture: Remove the culture medium and add an appropriate amount every 10 cm ² Add 1 mL of TRIzon Reagent.3a. Cell suspension: Collect cells by centrifugation. Add 1 mL of TRIzon Reagent to every 5 × 10 µ m cell.2. After adding TRIzon Reagent, repeatedly blow a few times to fully crack the sample. Leave at room temperature for 5 minutes to completely separate the protein nucleic acid complex.3. Add 200 to every 1 mL of TRIzon Reagent µ LTRIzon PaI ™， Cover the tube tightly, vigorously shake for 15 seconds, and let it sit at room temperature for 2 minutes.4. Centrifuge at 4 ℃ 12000 rpm (~13400 × g) for 10 minutes. At this time, the sample is divided into three layers: the red organic phase, the middle layer, and the upper colorless aqueous phase. RNA is mainly in the upper aqueous phase. Move the upper aqueous phase to a new RNase Free centrifuge tube (provided).5. Add an equal volume of 70% ethanol (prepared without RNase water) to the obtained aqueous solution, invert and mix well.6. Add all the solutions obtained in the previous step to the spin columns RM that have been loaded into the collection tube. If the solution cannot be added at once, it can be transferred in multiple batches. Centrifuge at 12000 rpm for 20 seconds, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.7. Add 350 to the adsorption column µ L Buffer RW1, centrifuge at 12000 rpm for 20 seconds, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.8. Preparation of DNase I mixture: Take 52 µ LRNase Free Water, add 8 to it µ L 10 x Reaction Buffer and 20 µ L DNase I (1 U/ µ L) Mix well and prepare to a final volume of 80 µ The reaction solution of L.9. Directly add 80 µ L DNase I mixture to the adsorption column and incubate at 20-30 ℃ for 15 minutes.10. Add 350 to the adsorption column µ L Buffer RW1, centrifuge at 12000 rpm for 1 minute, discard the waste liquid, and place the adsorption column back into the recovery manifold.11. Add 500 to the adsorption column µ L Buffer RW2 (check if anhydrous ethanol has been added before use), centrifuge at 12000 rpm for 20 seconds, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.12. Repeat step 11.Centrifuge at 12000 rpm for 2 minutes and discard the waste liquid from the collection tube. Place the adsorption column at room temperature for a few minutes and thoroughly air dry. Attention: The purpose of this step is to remove residual ethanol from the adsorption column, which will affect subsequent enzymatic reactions (enzyme digestion,. )PCR, etc.14. Place the adsorption column in a new RNase free centrifuge tube and add 30-50 to the middle of the adsorption column µ Place RNase Free Water at room temperature for 1 minute, centrifuge at 12000 rpm for 1 minute, collect RNA solution, and store RNA at -70 ℃ to prevent degradation.Attention:1) The volume of RNase Free Water should not be less than 30 µ L. Small volume affects the recovery rate.2) If you want to increase RNA production, you can use 30-50 µ Repeat step 14 for the new RNase Free Water.3) If you want to increase the RNA concentration, you can add the obtained solution back to the adsorption column and repeat step 14... Read More | Inquire |