| Description | Lactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobicLactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobic metabolism. Abnormally high concentrations of lactic acid are associated with pathological conditions such as cancer, diabetes, and lactic acidosis.The detection principle of this kit is as follows: Lactate dehydrogenase catalyzes the conversion of L-lactate to pyruvate, simultaneously reducing NAD+ to NADH and H+. Further, through the hydrogen transfer action of 1-mPMS, WST-8 reacts to form a yellow, soluble formazan. The absorbance at 450 nm is measured to calculate the L-lactate content in the sample.Detection Range: 0.03-2 mMSensitivity: 0.03 mMApplicable Samples: Animal and plant tissues, cells, bacteria, serum (plasma), or other liquids.L1501211Component48T96TStorageL1501211ALactate Assay Buffer70 mL70 mL×22-8℃L1501211BLactate Dehydrogenase0.7 mL1.4 mL-20℃L1501211CLactate Dehydrogenase Cofactor0.5 mL1 mL-20℃L1501211DWST-8350 µL700 µL-20℃. Store in the dark.L1501211EEnhancer70 µL140 µL-20℃. Store in the dark.L1501211FL(+)-Lactate Standard (100 mM)50 µL100 µL-20℃Please check the quantity of each component before the experiment.An additional 10% of each component is provided beyond the specified volume for standard curve preparation or preliminary experiments.User-Provided Instruments and ReagentsTypeNameNotesInstrumentMicroplate ReaderCapable of measuring absorbance at 450 nm.Consumables96-well MicroplateStandard transparent plate.ReagentsPBS (pH 7.4)For washing samples.OthersHomogenizer (for tissue samples), incubator, ice machine, low-temperature centrifuge, adjustable pipettes and tipsUsing a multichannel pipette for large-scale detection can improve efficiency.Experimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsLactate Assay BufferReady-to-use; equilibrate to room temperature before use.4℃保存 Store at 4°C.Lactate DehydrogenaseReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.Lactate Dehydrogenase CofactorReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.WST-8Ready-to-use;Keep on ice during the experiment; store aliquots at -20°C.EnhancerReady-to-use;Keep on ice protected from light during the experiment; store aliquots at -20°C protected from light.L(+)-Lactate Standard (100 mM)Equilibrate to room temperature before use.100 mM, store aliquots at -20°C.2. Standard PreparationAdd 20 µL of the 100 mM standard to 980 µL of Lactate Assay Buffer to prepare a 2 mM standard stock solution. Aliquot and store at -20°C for up to 6 months. Dilute the 2 mM standard stock solution sequentially with Lactate Assay Buffer to prepare standard working solutions with final concentrations of 1 mM, 0.5 mM, 0.25 mM, 0.125 mM, 0.0625 mM, and 0.03125 mM. Use Lactate Assay Buffer as the blank.Standard Working SolutionStandard (µL)Lactate Assay Buffer (µL)Concentration (mM)1200 µL of 2 mM022200 µL of 2 mM20013200 µL of 1 mM2000.54200 µL of 0.5 mM2000.255200 µL of 0.25 mM2000.1256200 µL of 0.125 mM2000.06257200 µL of 0.0625 mM2000.03125Blank020003. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for up to 1 month. NADH or NADPH present in cell or tissue extracts can create background for lactate assay. To remove NADH or NADPH background, an equal amount of sample can be assayed without lactate dehydrogenase, and the background reading should be subtracted from the lactate reading. Endogenous lactate dehydrogenase (LDH) can degrade lactate. Samples containing LDH (e.g., cell culture medium, cell or tissue lysates) should be processed using a 10 kDa MW cutoff ultrafiltration tube (centrifuge at 12,000 g, 4°C for 10 min; follow the filter instructions) to remove all proteins. Use the filtrate for detection, then store at -80°C.3.1 Animal/Plant Tissues: Weigh approximately 0.1 g of tissue sample, add 1 mL of Lactate Assay Buffer, and homogenize on ice. Centrifuge at 12,000 g, 4°C for 5 min. Transfer the supernatant to a new tube and keep on ice for detection.3.2 Cells or Bacteria: Collect 5×10^6 cells. Wash the cells or bacteria with pre-cooled PBS. Centrifuge at 800 g for 2 min, discard the supernatant. Add 1 mL of Lactate Assay Buffer, and disrupt using an ultrasonic homogenizer on ice for 5 min (power 20% or 200 W, ultrasonic 3 s, interval 7 s, repeat 30 times). Centrifuge at 12,000 g, 4°C for 5 min. Collect the supernatant and keep on ice for detection.3.3 Plasma and Serum (Other Biological Fluids): Detect directly.4. Experimental Steps4.1 Microplate Reader Preparation: Preheat for at least 30 minutes, set wavelength to 450 nm.4.2 Working Reagent Preparation: 50 µL of Working Reagent is required per well. To avoid loss, prepare for 55 µL per single well system: Pipette 31 µL Lactate Assay Buffer, 8 µL Lactate Dehydrogenase Cofactor, 5 µL WST-8, 1 µL Enhancer, and 10 µL Lactate Dehydrogenase. Mix well. The Working Reagent must be prepared freshly and used immediately.4.3 Assay System Setup: Set up the detection system in the microplate according to the table below. The standard curve generally needs to be performed only once.ReagentStandard Well (µL)Test Well (µL)Sample050Standard Working Solution500Working Reagent50504.4 Absorbance Measurement: Mix well and incubate at 37°C protected from light for 30 min. Read the absorbance at 450 nm, recorded as Ablank, Astandard, and Atest. 5. Result CalculationThe following provides both the derived formula and the simplified calculation formula, which are completely equivalent.5.1 Data ProcessingCalculate ΔAstandard= Astandard- Ablank, ΔAtest = Atest - Ablank.5.2 Standard Curve PlottingPlot the standard curve with standard concentration as the y-axis and ΔAstandard as the x-axis. Substitute ΔAstandard into the equation to obtain the y value (mM).5.3 Sample L-Lactate Content Calculation① Calculated based on sample weight:L-Lactate (µmol/g) = y × Vsample ÷ (W × Vsample ÷ Vtotal) × n = y ÷ W × n② Calculated based on cell or bacterial count:L-Lactate (µmol/10⁴ cells) = y × Vsample ÷ (500 × Vsample ÷ Vtotal) × n = y ÷ 500 × n③ Calculated based on liquid volume:L-Lactate (mM) = y × Vsample ÷ Vsample × n = y × n④ Calculated based on protein concentration:L-Lactate (µmol/mg prot) = y × Vsample ÷ (Vsample × Cpr) × n = y ÷ Cpr × nParameter Description:1 mM = 1 mmol/L;Vsample : Volume of sample added, 0.05 mL;n: Sample dilution factor;Cpr: Sample protein concentration, mg/mL;W: Sample weight, g;Vtotal: Total volume of sample extract, 1 mL;500: Cell or bacterial count, 5×10⁶, converted to units of 10⁴.Result Presentation Using Previous Standard CurveTypical Standard Curve: y = 2.2613x - 0.0531Example-1: 50 µL of chicken serum was taken and processed according to the assay steps using a 96-well plate. The measured ΔAtest = Atest - Ablank= 0.435 - 0.096 = 0.339. Substituting into the standard curve, y = 0.713 mM. Calculated based on liquid volume: Lactate content (mM) = y × n = 0.713 × 5 = 3.565 mM.PrecautionsIt is recommended to perform preliminary experiments using 2-3 samples expected to have significant differences before formal testing.For tissue and cell samples, results can be normalized by measuring the protein concentration.This kit is compatible with spectrophotometer detection. Adjust the preparation volume of detection reagents proportionally according to the spectrophotometer's requirements.It is recommended to establish your own standard curve for improved accuracy. If not, you may refer to the typical standard curve formula provided in the results section for calculation.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please wear appropriate personal protective equipment (lab coat, mask, gloves, hair cap, etc.) throughout the experiment and perform experiments in a fume hood or biosafety cabinet.This product is for scientific research use only. Not intended for clinical diagnosis.Frequently Asked QuestionsWhat should I do if the sample ΔAtest is too high or too low?If the sample ΔAtest is >1.0, the lactate content in the sample is too high. Dilute the sample appropriately with Lactate Assay Buffer (multiply by the dilution factor in the calculation). If the sample ΔAtest is <0.13, increase the sample amount... Read More | DescriptionThe 1 µm Coupling Kit makes conducting immunoprecipitation and biomolecule separation easier and more flexible. The Kit contains AnteoBind™activated 1 µm magnetic particles that give you increased antibody binding capacity and functionality, while the included blocking DescriptionThe 1 µm Coupling Kit makes conducting immunoprecipitation and biomolecule separation easier and more flexible. The Kit contains AnteoBind™activated 1 µm magnetic particles that give you increased antibody binding capacity and functionality, while the included blocking buffer decreases background noise. Reduce reagent preparation time; remove traditional surface preparation steps such as EDC and replace these steps with the 1 µm pre-activated magnetic particles provided. This Kit reduces aggregation and gives you the freedom and ability to develop multifunctional particles for diverse applications, including dual labelling.Binding Capacity and Dispersity:Binding Capacity:> 20 µg IgG/mgMonodispersity:> 90% (by light microscopy determination)Particle based immunoassays, bioseparations and immunoprecipitation... Read More | Inquire | Inquire | This kit is used to extract and purify high-quality total RNA from various plants, and is also suitable for the extraction of fungal hyphal RNA. A unique Shredder separation column is used for homogenization and filtration of high viscosity plant or fungal lysates, while silica based membrane is This kit is used to extract and purify high-quality total RNA from various plants, and is also suitable for the extraction of fungal hyphal RNA. A unique Shredder separation column is used for homogenization and filtration of high viscosity plant or fungal lysates, while silica based membrane is used to adsorb RNA for purification, effectively removing various pollutants such as polysaccharides through washing. The washed RNA can be directly used in various downstream experiments. RNA with a molecular weight greater than 200 bases was extracted using this reagent kit, with high purity and almost no DNA residue. If it is an RNA experiment that is very sensitive to trace amounts of DNA, the remaining DNA can be digested and removed on a column using DNase I without RNase. The extracted RNA can be used for experiments such as Northern Blot, Dot Blot, RT-PCR, and in vitro translation. R665489Component50 TStorageR665489ABuffer RL35 mLRTR665489BBuffer RLC35 mLRTR665489CBuffer RW140 mLRTR665489DBuffer RW2 (concentrate)11 mLRTR665489ERNase-Free Water10 mLRTR665489FSpin Columns FL with Collection Tubes50 setsRTR665489GSpin Columns RM with Collection Tubes50 setsRTR665489HRNase-Free Centrifuge Tubes (1.5 mL)50 EART Self prepared reagents:β- Mercaptoethanol, anhydrous ethanol (newly opened or dedicated for RNA extraction).Preparation and important precautions before the experiment:To prevent RNase pollution, attention should be paid to the following aspects:1) Use RNase free plastic products and gun heads to avoid cross contamination.2) Glassware should be dry baked at a high temperature of 180 ℃ for 4 hours before use, while plastic containers can be soaked in 0.5 M NaOH for 10 minutes, thoroughly rinsed with water, and then sterilized under high pressure.3) Prepare the solution using water without RNase.4) Operators should wear disposable masks and gloves, and change gloves frequently during the experiment.2. The extracted samples should avoid repeated freeze-thaw cycles, otherwise it will affect the quantity and quality of RNA extraction.3. Please add Buffer RL before use β- Mercaptoethanol, with a final concentration of 1%. Add 10 to 1 ml Buffer RL µ L β Mercaptoethanol. join β- The buffer RL room temperature of mercaptoethanol can be stored for one month. No need to add buffer RLC when using it β- Mercaptoethanol.Before the first use, anhydrous ethanol should be added to Buffer RW2 according to the instructions on the reagent bottle label.5. If precipitation occurs in Buffer RL and Buffer RLC, please heat them to dissolve and place them at room temperature.6. All centrifugation steps should be carried out at room temperature unless otherwise specified, and all operation steps should be carried out quickly.7. If downstream experiments are highly sensitive to DNA, it is recommended to treat RNA with DNase I without RNase.Operation steps:1. Take 50-100 mg of fresh plant tissue, add liquid nitrogen and quickly grind it into powder.2. Collect the ground powder into a centrifuge tube (provided by oneself) and add 600 µ L Buffer RL (check if it is added before use) β- Sulfhydryl ethanol or Buffer RLC, vortex oscillation causes it to fully decompose.Attention:1) The main component of Buffer RL is guanidine isothiocyanate, which is suitable for the lysis of most plant tissues. However, in some plant tissues (such as corn endosperm), due to the unique secondary metabolites, guanidine isothiocyanate causes precipitation in the sample, resulting in poor RNA extraction efficiency. In this case, Buffer RLC can be added instead of Buffer RL.2) Incubating at 56 ℃ for 1-3 minutes helps with tissue lysis, but plants with high starch content should not be subjected to high-temperature incubation.3. Transfer all the liquid obtained in step 2 to the spin columns FL that have been loaded into the collection tube, centrifuge at 12000 rpm (~13400 × g) for 2 minutes, and transfer the supernatant from the collection tube to a new centrifuge tube (provided by oneself).Attention:1) When aspirating liquid, the tip of the gun can be cut off for easy sampling.2) Spin Columns FL can remove most of the fragments, but there will still be a small amount flowing out. After centrifugation, precipitation will form in the collection tube. When proceeding to the next step, be careful not to absorb the sediment.4. Add 0.5 times the volume of anhydrous ethanol to the clean cracking solution obtained in step 3 and quickly mix well. Attention: Adding ethanol may cause precipitation, but it does not affect subsequent experiments.5. Add all the solutions obtained in step 4 to the spin columns RM that have been loaded into the collection tube. If it is not possible to add all the solutions to the adsorption column at once, please transfer them in two separate steps. Centrifuge at 12000 rpm for 15 seconds, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.6. Add 700 to the adsorption column µ Centrifuge at 12000 rpm for 1 minute, discard the waste liquid from the collection tube, and place the adsorption column back into the collection tube. Optional steps: If conducting RNA experiments that are highly sensitive to trace amounts of DNA, replace step 6 with the following steps.1) Add 350 to the adsorption column µ L Buffer RW1, centrifuge at 12000 rpm for 15 seconds, discard the waste liquid, and place the adsorption column back into the recovery manifold.2) Preparation of DNase I mixture: Take 52 µ Add 8 RNase Free Water to it µ 10 x Reaction Buffer and 20 µ DNase I (1 U/ µ l) Mix well and prepare to a final volume of 80 µ The reaction solution of L.Attention:The above system is configured according to our company's DNase I reaction system. Please refer to the corresponding instructions for other company products.3) Add 80 µ l of DNase I reaction solution directly to the adsorption column and incubate at 20-30 ℃ for 15 minutes.4) Add 350 to the adsorption column µ L Buffer RW1, centrifuge at 12000 rpm for 15 seconds, discard the waste liquid, and place the adsorption column back into the recovery manifold.7. Add 500 to the adsorption column µ Buffer RW2 (check if anhydrous ethanol is added before use), centrifuge at 12000 rpm for 15 seconds, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.8. Repeat step 7.Centrifuge at 9.12000 rpm for 2 minutes and discard the waste liquid from the collection tube. Place the adsorption column at room temperature for a few minutes to thoroughly dry the anhydrous ethanol in the column.Attention:The purpose of this step is to remove residual ethanol from the adsorption column, which will affect subsequent enzymatic reactions (such as enzyme digestion, PCR, etc.).10. Place the adsorption column in a new RNase free centrifuge tube, and add 30-50 to the middle of the adsorption column in the air µ Place RNase Free Water at room temperature for 1 minute, centrifuge at 12000 rpm for 1 minute, collect RNA solution, and store RNA at -70 ℃ to prevent degradation.Attention:1) The volume of RNase Free Water should not be less than 30 µ l. Small volume affects the recovery rate.2) If you want to increase RNA production, you can use 30-50 µ Repeat step 10 for the new RNase Free Water.3) If you want to increase the RNA concentration, you can add the obtained solution back to the adsorption column and repeat step 10... Read More |