| Description | Lactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobicLactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobic metabolism. Abnormally high concentrations of lactic acid are associated with pathological conditions such as cancer, diabetes, and lactic acidosis.The detection principle of this kit is as follows: Lactate dehydrogenase catalyzes the conversion of L-lactate to pyruvate, simultaneously reducing NAD+ to NADH and H+. Further, through the hydrogen transfer action of 1-mPMS, WST-8 reacts to form a yellow, soluble formazan. The absorbance at 450 nm is measured to calculate the L-lactate content in the sample.Detection Range: 0.03-2 mMSensitivity: 0.03 mMApplicable Samples: Animal and plant tissues, cells, bacteria, serum (plasma), or other liquids.L1501211Component48T96TStorageL1501211ALactate Assay Buffer70 mL70 mL×22-8℃L1501211BLactate Dehydrogenase0.7 mL1.4 mL-20℃L1501211CLactate Dehydrogenase Cofactor0.5 mL1 mL-20℃L1501211DWST-8350 µL700 µL-20℃. Store in the dark.L1501211EEnhancer70 µL140 µL-20℃. Store in the dark.L1501211FL(+)-Lactate Standard (100 mM)50 µL100 µL-20℃Please check the quantity of each component before the experiment.An additional 10% of each component is provided beyond the specified volume for standard curve preparation or preliminary experiments.User-Provided Instruments and ReagentsTypeNameNotesInstrumentMicroplate ReaderCapable of measuring absorbance at 450 nm.Consumables96-well MicroplateStandard transparent plate.ReagentsPBS (pH 7.4)For washing samples.OthersHomogenizer (for tissue samples), incubator, ice machine, low-temperature centrifuge, adjustable pipettes and tipsUsing a multichannel pipette for large-scale detection can improve efficiency.Experimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsLactate Assay BufferReady-to-use; equilibrate to room temperature before use.4℃保存 Store at 4°C.Lactate DehydrogenaseReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.Lactate Dehydrogenase CofactorReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.WST-8Ready-to-use;Keep on ice during the experiment; store aliquots at -20°C.EnhancerReady-to-use;Keep on ice protected from light during the experiment; store aliquots at -20°C protected from light.L(+)-Lactate Standard (100 mM)Equilibrate to room temperature before use.100 mM, store aliquots at -20°C.2. Standard PreparationAdd 20 µL of the 100 mM standard to 980 µL of Lactate Assay Buffer to prepare a 2 mM standard stock solution. Aliquot and store at -20°C for up to 6 months. Dilute the 2 mM standard stock solution sequentially with Lactate Assay Buffer to prepare standard working solutions with final concentrations of 1 mM, 0.5 mM, 0.25 mM, 0.125 mM, 0.0625 mM, and 0.03125 mM. Use Lactate Assay Buffer as the blank.Standard Working SolutionStandard (µL)Lactate Assay Buffer (µL)Concentration (mM)1200 µL of 2 mM022200 µL of 2 mM20013200 µL of 1 mM2000.54200 µL of 0.5 mM2000.255200 µL of 0.25 mM2000.1256200 µL of 0.125 mM2000.06257200 µL of 0.0625 mM2000.03125Blank020003. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for up to 1 month. NADH or NADPH present in cell or tissue extracts can create background for lactate assay. To remove NADH or NADPH background, an equal amount of sample can be assayed without lactate dehydrogenase, and the background reading should be subtracted from the lactate reading. Endogenous lactate dehydrogenase (LDH) can degrade lactate. Samples containing LDH (e.g., cell culture medium, cell or tissue lysates) should be processed using a 10 kDa MW cutoff ultrafiltration tube (centrifuge at 12,000 g, 4°C for 10 min; follow the filter instructions) to remove all proteins. Use the filtrate for detection, then store at -80°C.3.1 Animal/Plant Tissues: Weigh approximately 0.1 g of tissue sample, add 1 mL of Lactate Assay Buffer, and homogenize on ice. Centrifuge at 12,000 g, 4°C for 5 min. Transfer the supernatant to a new tube and keep on ice for detection.3.2 Cells or Bacteria: Collect 5×10^6 cells. Wash the cells or bacteria with pre-cooled PBS. Centrifuge at 800 g for 2 min, discard the supernatant. Add 1 mL of Lactate Assay Buffer, and disrupt using an ultrasonic homogenizer on ice for 5 min (power 20% or 200 W, ultrasonic 3 s, interval 7 s, repeat 30 times). Centrifuge at 12,000 g, 4°C for 5 min. Collect the supernatant and keep on ice for detection.3.3 Plasma and Serum (Other Biological Fluids): Detect directly.4. Experimental Steps4.1 Microplate Reader Preparation: Preheat for at least 30 minutes, set wavelength to 450 nm.4.2 Working Reagent Preparation: 50 µL of Working Reagent is required per well. To avoid loss, prepare for 55 µL per single well system: Pipette 31 µL Lactate Assay Buffer, 8 µL Lactate Dehydrogenase Cofactor, 5 µL WST-8, 1 µL Enhancer, and 10 µL Lactate Dehydrogenase. Mix well. The Working Reagent must be prepared freshly and used immediately.4.3 Assay System Setup: Set up the detection system in the microplate according to the table below. The standard curve generally needs to be performed only once.ReagentStandard Well (µL)Test Well (µL)Sample050Standard Working Solution500Working Reagent50504.4 Absorbance Measurement: Mix well and incubate at 37°C protected from light for 30 min. Read the absorbance at 450 nm, recorded as Ablank, Astandard, and Atest. 5. Result CalculationThe following provides both the derived formula and the simplified calculation formula, which are completely equivalent.5.1 Data ProcessingCalculate ΔAstandard= Astandard- Ablank, ΔAtest = Atest - Ablank.5.2 Standard Curve PlottingPlot the standard curve with standard concentration as the y-axis and ΔAstandard as the x-axis. Substitute ΔAstandard into the equation to obtain the y value (mM).5.3 Sample L-Lactate Content Calculation① Calculated based on sample weight:L-Lactate (µmol/g) = y × Vsample ÷ (W × Vsample ÷ Vtotal) × n = y ÷ W × n② Calculated based on cell or bacterial count:L-Lactate (µmol/10⁴ cells) = y × Vsample ÷ (500 × Vsample ÷ Vtotal) × n = y ÷ 500 × n③ Calculated based on liquid volume:L-Lactate (mM) = y × Vsample ÷ Vsample × n = y × n④ Calculated based on protein concentration:L-Lactate (µmol/mg prot) = y × Vsample ÷ (Vsample × Cpr) × n = y ÷ Cpr × nParameter Description:1 mM = 1 mmol/L;Vsample : Volume of sample added, 0.05 mL;n: Sample dilution factor;Cpr: Sample protein concentration, mg/mL;W: Sample weight, g;Vtotal: Total volume of sample extract, 1 mL;500: Cell or bacterial count, 5×10⁶, converted to units of 10⁴.Result Presentation Using Previous Standard CurveTypical Standard Curve: y = 2.2613x - 0.0531Example-1: 50 µL of chicken serum was taken and processed according to the assay steps using a 96-well plate. The measured ΔAtest = Atest - Ablank= 0.435 - 0.096 = 0.339. Substituting into the standard curve, y = 0.713 mM. Calculated based on liquid volume: Lactate content (mM) = y × n = 0.713 × 5 = 3.565 mM.PrecautionsIt is recommended to perform preliminary experiments using 2-3 samples expected to have significant differences before formal testing.For tissue and cell samples, results can be normalized by measuring the protein concentration.This kit is compatible with spectrophotometer detection. Adjust the preparation volume of detection reagents proportionally according to the spectrophotometer's requirements.It is recommended to establish your own standard curve for improved accuracy. If not, you may refer to the typical standard curve formula provided in the results section for calculation.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please wear appropriate personal protective equipment (lab coat, mask, gloves, hair cap, etc.) throughout the experiment and perform experiments in a fume hood or biosafety cabinet.This product is for scientific research use only. Not intended for clinical diagnosis.Frequently Asked QuestionsWhat should I do if the sample ΔAtest is too high or too low?If the sample ΔAtest is >1.0, the lactate content in the sample is too high. Dilute the sample appropriately with Lactate Assay Buffer (multiply by the dilution factor in the calculation). If the sample ΔAtest is <0.13, increase the sample amount... Read More | Product IntroductionBCIP (5-Bromo-4-chloro-3-indolyl phosphate) 5-bromo-4-chloro-3-indolyl-phosphate + NBT (tetrazolium nitro blue) is the best substrate for alkaline phosphatase (AP) One of the combination. Under the catalysis of alkaline phosphatase, BCIP will be hydrolyzed to produce a highly Product IntroductionBCIP (5-Bromo-4-chloro-3-indolyl phosphate) 5-bromo-4-chloro-3-indolyl-phosphate + NBT (tetrazolium nitro blue) is the best substrate for alkaline phosphatase (AP) One of the combination. Under the catalysis of alkaline phosphatase, BCIP will be hydrolyzed to produce a highly reactive product, which reacts with NBT to form an insoluble dark blue to blue-violet compound. This kit can be used for the enzymatic color development of IHC and Western Blot experiments of the AP system. Under AP catalysis, a dark blue precipitate is produced where AP conjugates are combined on tissue sections or blotting membranes. The location and expression of the target protein can be determined based on the color reaction.Product Components40×BCIP: 1 ml40×NBT: 1 mlBCIP/NBT Buffer: 40 mlPrecautions1. The working fluid should be prepared for immediate use, and the prepared working fluid will be effective within 1 hour.2. The amount of working fluid must be sufficient to ensure complete coverage of the tissue sheet or blotting membrane. To3. In order to obtain the best experimental results, be sure to optimize the experimental conditions.4. NBT is poisonous, please take necessary protective measures when using it.5. This product is only used for scientific research, not for human experiments or human treatment.Instructions1. BCIP/NBT color developing working solution preparation:According to the required amount, mix 40×BCIP, 40×NBT and BCIP/NBT Buffer in a volume ratio of 1:1:38 to form the BCIP/NBT color developing working solution.2. Color rendering:1) Blotting membrane color development: Drop the prepared working solution on the blotting membrane (or pour the blotting membrane into the BCIP/NBT color developing working solution), and incubate for 3-10 minutes at room temperature and dark. After the color development is completed, the film is immersed in water to terminate the reaction.2) Color development of tissue sections or cell slides: Drop an appropriate amount of BCIP/NBT color developing working solution on the tissue sections or cell slides that need color development, and incubate at room temperature for 3-10 minutes in the dark. Observe under the microscope to control the color development time. When the best color development effect is reached, rinse with tap water to stop the color development. After color development, the slices are counter-stained, dehydrated and transparent, and can be stored for a long time after mounting... Read More | Inquire | Inquire | The fluorescent dye PKH67 is suitable for conventional cell membrane labeling. It is a green fluorescent dye that can track cells in vitro and in vivo. It labels cells by binding to the lipid components of the membrane structure. PKH67 has low cytotoxicity, low fluorescence background, high fat The fluorescent dye PKH67 is suitable for conventional cell membrane labeling. It is a green fluorescent dye that can track cells in vitro and in vivo. It labels cells by binding to the lipid components of the membrane structure. PKH67 has low cytotoxicity, low fluorescence background, high fat solubility, can easily penetrate cell membranes, and has strong and stable green fluorescence. PKH67-labeled cells can be used for in vitro and in vivo proliferation studies, and have the function of not staining neighboring cells. In the process of cell division and proliferation, the fluorescence intensity of PKH67 will gradually decrease as the cells divide. The labeled fluorescence can be evenly distributed to the two sub-generation cells, so its fluorescence intensity is half that of the parent cell. According to this feature, It can be used to detect cell proliferation, cell cycle estimation and cell division, etc. The fluorescence of PKH67-labeled cells is very uniform, and the fluorescence distribution of sub-generation cells after division is also more uniform. In the process of cell division and proliferation, PKH67-labeled fluorescence can be evenly distributed between the two sub-generation cells, and the fluorescence intensity becomes half of that of the parent cell. According to the difference in fluorescence intensity, the undivided cells can be detected by flow cytometry. One time (1/2 the fluorescence intensity), the second time (1/4 the fluorescence intensity), three times (1/8 the fluorescence intensity), and more divisions of cells. PKH67 can detect splits up to six times or even more. In addition to the detection of cell proliferation, PKH67 can also be used for in vitro tracking of cells. After labeling, the fluorescence expression is stable in the cell, and the positive labeling rate is over 98%. The labeled cells have good morphology, which can effectively observe the cells in vitro. Induce differentiation; or inject labeled cells into the body, it can effectively show the migration and differentiation of transplanted cells in living tissues. PKH67-labeled cells can be used for in vivo observation for as long as several weeks. It is often used for in vivo cell detection experiments and experiments to observe long-term cell activity using fluorescence electron microscope. PKH67 is less toxic and does not affect cell proliferation. This method is simple to operate, does not use radioactive isotopes, and poses no safety hazards. You can get the desired experimental data faster, more accurately and more safely.Due to the longer length of the charcoal tail, internal studies have shown that PKH67 is less transferred between cells than PKH2. In in vivo studies using PKH1 and PKH2, the fluorescence intensity will slowly lose. Since this is a behavioral characteristic of green cell linker dye rather than red cell linker dye, PKH67 will have similar properties. The correlation between the in vitro cell membrane retention of non-dividing cells and the in vivo fluorescence half-life reveals that the in vivo fluorescence half-life of PKH67 is 10-12 days. Other green cell linker dyes with similar half-lives have been used to monitor the transport of lymphocytes and macrophages in the body within one to two months. The results indicate that PKH67 can also be used for medium-term in vivo tracking studies.The dye can stably bind to the lipid region of the cell membrane and emit fluorescence, and is mainly used for cell labeling in vitro, cell proliferation research in vitro, and cell tracing research in vivo and in vitro. The fluorescence half-life of PKH67 in vivo is 10-12 days. Compared with PKH-67, PKH-26 has a longer half-life, and the half-life of PKH26 labeled on rabbit red blood cells is more than 100 days. Especially suitable for in vitro proliferation research and long-term in vivo cell tracking research. After PKH67 labels the cells, flow cytometry is usually used for cell proliferation detection.Kit components0.1ml kits: P266290A-0.1ml P266290B-10ml1ml kits: P266290A-1ml P266290B-60mlDyes with A suffix and diluents with B suffix are used togetherPKH67 labeled cells show green fluorescence, the fluorescence wavelength: λex=490 nm, λem=502 nm.Storage conditions: -20℃ protected from light, valid for 1 yearPrecautions●Staining concentration varies according to the type of cell and the number of cells in each well.● The prepared PKH67 mother liquor is very easy to dissolve. It is recommended to store in aliquots and freeze-dry at ≦-20℃.● PKH67 working solution should be prepared for immediate use, and cannot be prepared in advance, because PKH67 will decompose due to the absorption of water and affect the dyeing effect.● PKH67 is easily decomposed and will deteriorate quickly in the water solution. Please avoid contact with water during use of mother liquor. The working fluid is in contact with the water during the process of labeling the cells within the permitted time range.● PKH67 fluorescent dye is a DMSO solution. It will solidify and stick to the bottom, wall or cap of the tube at a lower temperature such as 4℃ and ice bath. After being taken out of the refrigerator, it will return to room temperature and become After the liquid is in the state, remove the cap from the bottom of the tube. It can be used after it has completely melted in a 37°C water bath.● The number of generations or time that can be traced after different cell types are marked is quite different. Please make a test based on the actual situation or reference documents.Instructions1. Staining solution preparation:(1) Take out the PKH67 reagent from the refrigerator, let it stand for a few minutes to room temperature, or after a 37°C water bath, leave the tube containing PKH67, and be sure to leave the tube for a few minutes before opening the lid to allow the reagent to fully fall into the tube The lid can only be opened after the bottom.(2) According to the number of cell samples to be tested, dilute the probe 10 times with the diluent, and then use a suitable solution (such as non-clear medium, HBSS or PBS) to dilute the PKH67 mother liquor 25 times to prepare a stain Work fluid. The best working solution concentration should be adjusted according to different cells and your own experimental system. Generally, the cells can be diluted 250 times according to the final concentration of the mother liquor in the kit. Some cells may need to increase the concentration appropriately.2. Cell staining(1) Resuspend the prepared cells to be tested in 100µl of staining solution to a cell concentration of about 107/ml. You can also perform in-situ staining, as long as the staining solution is enough to cover the cells.(2) Culture the cells at 2～8℃ for 15～30 minutes. The best culture time is different for different cells.It is recommended to incubate the labeled cells in the staining solution at 37°C for 5 minutes, and then at 4°C for 15 minutes.Low-temperature incubation can reduce the endocytosis of the dye by the cells, help the dye to label the plasma membrane, and reduce the possibility of the dye localizing to cytoplasmic vesicles.(3) After separation, remove the supernatant, collect the cells, wash the cells 1-2 times with PBS or non-clear medium, and finally add PBS or non-clear medium to resuspend the cells.(4) Take 500µl of cell suspension and test with flow cytometer. Ex/Em=490/502nm.(5) Subsequently, the cells can be cultured according to the normal culture method.(6) The labeling effect can be directly observed under a fluorescence microscope, or the cell proliferation can be detected by a flow cytometer after an appropriate period of culture, or used for cell fluorescence traces for other specific experimental purposes... Read More |