| Description | Lactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobicLactic acid is an important intermediate product in the metabolic processes of organisms, closely related to carbohydrate metabolism, lipid metabolism, protein metabolism, and intracellular energy metabolism. Lactic acid concentration is a key indicator for evaluating glycogen metabolism and aerobic metabolism. Abnormally high concentrations of lactic acid are associated with pathological conditions such as cancer, diabetes, and lactic acidosis.The detection principle of this kit is as follows: Lactate dehydrogenase catalyzes the conversion of L-lactate to pyruvate, simultaneously reducing NAD+ to NADH and H+. Further, through the hydrogen transfer action of 1-mPMS, WST-8 reacts to form a yellow, soluble formazan. The absorbance at 450 nm is measured to calculate the L-lactate content in the sample.Detection Range: 0.03-2 mMSensitivity: 0.03 mMApplicable Samples: Animal and plant tissues, cells, bacteria, serum (plasma), or other liquids.L1501211Component48T96TStorageL1501211ALactate Assay Buffer70 mL70 mL×22-8℃L1501211BLactate Dehydrogenase0.7 mL1.4 mL-20℃L1501211CLactate Dehydrogenase Cofactor0.5 mL1 mL-20℃L1501211DWST-8350 µL700 µL-20℃. Store in the dark.L1501211EEnhancer70 µL140 µL-20℃. Store in the dark.L1501211FL(+)-Lactate Standard (100 mM)50 µL100 µL-20℃Please check the quantity of each component before the experiment.An additional 10% of each component is provided beyond the specified volume for standard curve preparation or preliminary experiments.User-Provided Instruments and ReagentsTypeNameNotesInstrumentMicroplate ReaderCapable of measuring absorbance at 450 nm.Consumables96-well MicroplateStandard transparent plate.ReagentsPBS (pH 7.4)For washing samples.OthersHomogenizer (for tissue samples), incubator, ice machine, low-temperature centrifuge, adjustable pipettes and tipsUsing a multichannel pipette for large-scale detection can improve efficiency.Experimental Procedure1. Reagent PreparationReagent NameReagent PreparationPrecautionsLactate Assay BufferReady-to-use; equilibrate to room temperature before use.4℃保存 Store at 4°C.Lactate DehydrogenaseReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.Lactate Dehydrogenase CofactorReady-to-use;Keep on ice during the experiment; store aliquots at -20°C.WST-8Ready-to-use;Keep on ice during the experiment; store aliquots at -20°C.EnhancerReady-to-use;Keep on ice protected from light during the experiment; store aliquots at -20°C protected from light.L(+)-Lactate Standard (100 mM)Equilibrate to room temperature before use.100 mM, store aliquots at -20°C.2. Standard PreparationAdd 20 µL of the 100 mM standard to 980 µL of Lactate Assay Buffer to prepare a 2 mM standard stock solution. Aliquot and store at -20°C for up to 6 months. Dilute the 2 mM standard stock solution sequentially with Lactate Assay Buffer to prepare standard working solutions with final concentrations of 1 mM, 0.5 mM, 0.25 mM, 0.125 mM, 0.0625 mM, and 0.03125 mM. Use Lactate Assay Buffer as the blank.Standard Working SolutionStandard (µL)Lactate Assay Buffer (µL)Concentration (mM)1200 µL of 2 mM022200 µL of 2 mM20013200 µL of 1 mM2000.54200 µL of 0.5 mM2000.255200 µL of 0.25 mM2000.1256200 µL of 0.125 mM2000.06257200 µL of 0.0625 mM2000.03125Blank020003. Sample PreparationNote: Fresh samples are recommended. If not used immediately, samples can be stored at -80°C for up to 1 month. NADH or NADPH present in cell or tissue extracts can create background for lactate assay. To remove NADH or NADPH background, an equal amount of sample can be assayed without lactate dehydrogenase, and the background reading should be subtracted from the lactate reading. Endogenous lactate dehydrogenase (LDH) can degrade lactate. Samples containing LDH (e.g., cell culture medium, cell or tissue lysates) should be processed using a 10 kDa MW cutoff ultrafiltration tube (centrifuge at 12,000 g, 4°C for 10 min; follow the filter instructions) to remove all proteins. Use the filtrate for detection, then store at -80°C.3.1 Animal/Plant Tissues: Weigh approximately 0.1 g of tissue sample, add 1 mL of Lactate Assay Buffer, and homogenize on ice. Centrifuge at 12,000 g, 4°C for 5 min. Transfer the supernatant to a new tube and keep on ice for detection.3.2 Cells or Bacteria: Collect 5×10^6 cells. Wash the cells or bacteria with pre-cooled PBS. Centrifuge at 800 g for 2 min, discard the supernatant. Add 1 mL of Lactate Assay Buffer, and disrupt using an ultrasonic homogenizer on ice for 5 min (power 20% or 200 W, ultrasonic 3 s, interval 7 s, repeat 30 times). Centrifuge at 12,000 g, 4°C for 5 min. Collect the supernatant and keep on ice for detection.3.3 Plasma and Serum (Other Biological Fluids): Detect directly.4. Experimental Steps4.1 Microplate Reader Preparation: Preheat for at least 30 minutes, set wavelength to 450 nm.4.2 Working Reagent Preparation: 50 µL of Working Reagent is required per well. To avoid loss, prepare for 55 µL per single well system: Pipette 31 µL Lactate Assay Buffer, 8 µL Lactate Dehydrogenase Cofactor, 5 µL WST-8, 1 µL Enhancer, and 10 µL Lactate Dehydrogenase. Mix well. The Working Reagent must be prepared freshly and used immediately.4.3 Assay System Setup: Set up the detection system in the microplate according to the table below. The standard curve generally needs to be performed only once.ReagentStandard Well (µL)Test Well (µL)Sample050Standard Working Solution500Working Reagent50504.4 Absorbance Measurement: Mix well and incubate at 37°C protected from light for 30 min. Read the absorbance at 450 nm, recorded as Ablank, Astandard, and Atest. 5. Result CalculationThe following provides both the derived formula and the simplified calculation formula, which are completely equivalent.5.1 Data ProcessingCalculate ΔAstandard= Astandard- Ablank, ΔAtest = Atest - Ablank.5.2 Standard Curve PlottingPlot the standard curve with standard concentration as the y-axis and ΔAstandard as the x-axis. Substitute ΔAstandard into the equation to obtain the y value (mM).5.3 Sample L-Lactate Content Calculation① Calculated based on sample weight:L-Lactate (µmol/g) = y × Vsample ÷ (W × Vsample ÷ Vtotal) × n = y ÷ W × n② Calculated based on cell or bacterial count:L-Lactate (µmol/10⁴ cells) = y × Vsample ÷ (500 × Vsample ÷ Vtotal) × n = y ÷ 500 × n③ Calculated based on liquid volume:L-Lactate (mM) = y × Vsample ÷ Vsample × n = y × n④ Calculated based on protein concentration:L-Lactate (µmol/mg prot) = y × Vsample ÷ (Vsample × Cpr) × n = y ÷ Cpr × nParameter Description:1 mM = 1 mmol/L;Vsample : Volume of sample added, 0.05 mL;n: Sample dilution factor;Cpr: Sample protein concentration, mg/mL;W: Sample weight, g;Vtotal: Total volume of sample extract, 1 mL;500: Cell or bacterial count, 5×10⁶, converted to units of 10⁴.Result Presentation Using Previous Standard CurveTypical Standard Curve: y = 2.2613x - 0.0531Example-1: 50 µL of chicken serum was taken and processed according to the assay steps using a 96-well plate. The measured ΔAtest = Atest - Ablank= 0.435 - 0.096 = 0.339. Substituting into the standard curve, y = 0.713 mM. Calculated based on liquid volume: Lactate content (mM) = y × n = 0.713 × 5 = 3.565 mM.PrecautionsIt is recommended to perform preliminary experiments using 2-3 samples expected to have significant differences before formal testing.For tissue and cell samples, results can be normalized by measuring the protein concentration.This kit is compatible with spectrophotometer detection. Adjust the preparation volume of detection reagents proportionally according to the spectrophotometer's requirements.It is recommended to establish your own standard curve for improved accuracy. If not, you may refer to the typical standard curve formula provided in the results section for calculation.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please wear appropriate personal protective equipment (lab coat, mask, gloves, hair cap, etc.) throughout the experiment and perform experiments in a fume hood or biosafety cabinet.This product is for scientific research use only. Not intended for clinical diagnosis.Frequently Asked QuestionsWhat should I do if the sample ΔAtest is too high or too low?If the sample ΔAtest is >1.0, the lactate content in the sample is too high. Dilute the sample appropriately with Lactate Assay Buffer (multiply by the dilution factor in the calculation). If the sample ΔAtest is <0.13, increase the sample amount... Read More | Product content: M665794Component125 TStorageM665794A2×miRNA qPCR Mixture (ROX)2×750 µL-20℃. Avoid freeze/thaw cycleM665794BReverse Primer, 10 µM60 µL-20℃. Avoid freeze/thaw cycleM665794CddH2O1.5 mL-20℃. Avoid freeze/thaw cycle Product Introduction:This kitProduct content: M665794Component125 TStorageM665794A2×miRNA qPCR Mixture (ROX)2×750 µL-20℃. Avoid freeze/thaw cycleM665794BReverse Primer, 10 µM60 µL-20℃. Avoid freeze/thaw cycleM665794CddH2O1.5 mL-20℃. Avoid freeze/thaw cycle Product Introduction:This kit uses the principle of SYBR Green I chimeric fluorescent dye method for miRNA fluorescence quantitative PCR detection. The kit includes 2 x miRNA qPCR Mixture and Reverse Primer required for detection. 2 x miRNA qPCR Mixture is a new generation pre mixed form of fluorescence quantitative PCR detection reagent specially developed for miRNA quantitative detection. The fluorescent dye SYBR Green I contained in it can bind to all double stranded DNA, making the product suitable for detecting different target sequences without the need to synthesize specific labeled probes. The GoldStar Taq DNA polymerase is a chemically modified and highly efficient thermal starter enzyme, coupled with a unique buffer system, which enhances reaction specificity, sensitivity, and enables accurate quantification of miRNA over a wider range. The 2x miRNA qPCR Mixture contains ROX dye and is suitable for fluorescence quantitative PCR instruments that require ROX as a calibration dye.Note: This kit must be used in conjunction with the miRNA cDNA first strand synthesis kit.Self prepared experimental materials: qPCR upstream primer.Forward Primer design principles:1. Follow the most common principles of primer design.2.Based on mature miRNA sequences, replacing U with T is the most basic and simplest design method.3.The Tm value of the downstream primer provided in the reagent kit is 63.6 ℃, and the Tm value of the upstream primer should be designed to be around 63.6 ℃ as much as possible.4. If the Tm value of the primer directly designed according to principle "2" is too low, several bases (preferably G or C bases) can be added to the 5 'end of the primer; One or several A bases can also be added at the 3 'end; Alternatively, both the 5 'and 3' ends can be modified simultaneously.5.If the Tm value of a primer designed directly according to principle "2" is too high, several bases can be removed from the 5 'or 3' end of the primer.Notes:1. Before using the reagent, please gently mix it upside down to avoid foaming, and use it after a brief centrifugation.2. The amount of miRNA first strand cDNA added should not exceed 10% of the volume of Real time PCR.3. For special detection systems, high content of cDNA templates can easily lead to non-specific amplification. Dilute cDNA appropriately (10 or 100 times dilution) based on the abundance of detected miRNAs.4. The 2x miRNA qPCR Mixture in this product contains SYBR Green I and ROX dyes. When storing this product or preparing PCR reaction solution, strong light exposure should be avoided.5. Avoid repeated freezing and thawing of this product. Repeated freezing and thawing may cause a decrease in product performance. This product can be stored at -20 ℃ for long-term storage. If frequent use is required in the short term, the 2xmiRNA qPCR Mixture can be stored at 2-8 ℃. However, the Reverse primer still needs to be stored at -20 ℃.Operation steps:1. Melt 2 x miRNA qPCR Mixture and Reverse Primer at room temperature (10 µ M). 2. When using, please gently mix the 2x miRNA qPCR Mixture upside down to avoid foaming, and use after brief centrifugation. If the reagent is not well mixed, its reaction performance will decrease.3. Place the reagent on ice and prepare the reaction system according to the following table: reagent volume final concentration 2×miRNA qPCR Mixture（ROX） 10 µl 1× Forward primer（10 µM） 0.4µl 0.2 µM Reverse primer（10 µM） 0.4µl 0.2 µM MiRNA first strand cDNA X µl — ddH2O up to 20 µl —4. The reaction program is set as follows:Attention!The pre denaturation reaction of this product must be completed at 95 ℃ for 10 minutes! Note: 1) The hot start enzyme used in this product must be activated under pre denaturation conditions of 95 ℃ and 10 minutes.2) The annealing temperature should be set at 60-64 ℃ as a reference range. When non-specific reactions occur, the annealing temperature can be increased... Read More | Products contentN665978Component384 TStorageN665978AIndex N502-N522 Primers for Illumina 16×24 µL-20℃. Avoid freeze/thaw cycle.N665978BIndex N701-N729 Primers for Illumina24×16 µL-20℃. Avoid freeze/thaw cycle. Products IntroductionThis kit is a companion to the Products contentN665978Component384 TStorageN665978AIndex N502-N522 Primers for Illumina 16×24 µL-20℃. Avoid freeze/thaw cycle.N665978BIndex N701-N729 Primers for Illumina24×16 µL-20℃. Avoid freeze/thaw cycle. Products IntroductionThis kit is a companion to the transposase-based rapid DNA library construction kit, designed for Illumina platform library construction. It contains 16 N5 primers and 24 N7 primers, which can be used to prepare 384 different bipartite Index libraries. All reagents provided in the kit have been subjected to stringent quality control and functional validation to maximize the stability and reproducibility of library construction. The libraries can be used for sequencing on Illumina platforms such as HiSeq X-10/4000/2500/2000 and MiSeq.Provide your own instruments, reagents and consumables1. Magnetic frame: DynaMagTM-2 is recommended.2. DNA purification and recovery kit: It is recommended to use Kangwei DNA purification and recovery kit by magnetic bead method.3. DNA building kit: It is recommended to use the Kangwei Century transposase method second-generation sequencing rapid DNA building kit.4. Anhydrous ethanol.5. Reaction tubes: It is recommended to use low adsorption PCR tubes with 1.5 ml centrifuge tubes; Tip: It is recommended to use a high quality filter tip to prevent contamination of kits and library samples. Pre-experiment Preparation and Important NotesPlease centrifuge briefly before opening the cap so that the liquid collects at the bottom of the tube to avoid cross-contamination between different primers.procedure For the use of the CombiVision Second Generation Sequencing Multisample Primer Kit, please follow the CombiVision Second Generation Sequencing Rapid DNA Library Kit protocol. Index N502-N522 Primers for Illumina Index N701-N729 Primers for Illumina... Read More | Products content Products IntroductionThis kit is a dedicated sample preparation solution for microbiome analysis and is suitable for the purification and enrichment of genomic DNA of pathogenic microorganisms such as bacteria and fungi from mixed samples such as swabs, blood, sputum, alveolar Products content Products IntroductionThis kit is a dedicated sample preparation solution for microbiome analysis and is suitable for the purification and enrichment of genomic DNA of pathogenic microorganisms such as bacteria and fungi from mixed samples such as swabs, blood, sputum, alveolar lavage, etc. During the purification process, differential lysis of the host cells and subsequent enzymatic digestion can effectively remove most of the host DNA while providing a comprehensive coverage of the bacterial and fungal DNA loci to a higher level. By differential lysis of host cells and subsequent enzymatic digestion, this kit can effectively remove most of the host DNA while maximizing the full coverage of bacterial, fungal and other pathogenic microbial DNA sites, thus obtaining microbiome DNA enrichment products with a higher coverage. Microbial DNA purified with this kit is suitable for a variety of downstream applications, including whole genome sequencing analysis, 16S rDNA-based high sensitivity microbiome analysis, and macrogenomic birdshot sequencing analysis. Self-contained reagents and consumablesSterile pipette tips with aerosol barrier to prevent cross-contamination anhydrous ethanol Microcentrifuge tubes (2 ml/1.5 ml) PBS buffer (required for some samples only)Pre-experiment Preparation and Important Notes1. Add 1.25 ml Proteinase K Storage Buffer to Proteinase K and store at -20℃. Do not leave the prepared Proteinase K (20 mg/ml) at room temperature for a long time, and avoid repeated freezing and thawing to avoid affecting its activity.2. Dissolve Lysozyme (100 mg) in 10 ml Enzymatic Lysis Buffer to a final concentration of 10 mg/ml, dispense into sterile tubes and store at -20℃. Do not leave the prepared Lysozyme (10 mg/ml) at room temperature for a long time and avoid repeated freezing and thawing to avoid affecting its activity.3. Thaw Buffer GB1 and Buffer GB2 at room temperature or 2-8°C before use and mix thoroughly. Thawed Buffer GB1 and Buffer GB2 can be left at 2-8°C for 1-2 weeks without affecting their activity, and should be stored at -20°C for long term storage. To ensure optimal performance, do not freeze or thaw more than three times. If less than one bottle of Buffer GB1 and Buffer GB2 is required for a single extraction, ensure that it is used under sterile conditions such as an ultra-clean bench and avoid microbial contamination and growth in the remaining buffer.4. Before first use, anhydrous ethanol should be added to Buffer GW1 and Buffer GW2 according to the instructions on the vial label and labeled.5. Check Buffer GL for crystallization or precipitation before use, and if crystallization or precipitation occurs, redissolve Buffer GL in a 56°C water bath.6. If the downstream experiments are sensitive to RNA contamination, 4 µl of DNase-Free RNase A (100 mg/ml) can be added before adding Buffer GL. RNase A is not provided in the kit, but can be ordered separately from CW0601S.7. This kit is designed for the isolation of DNA from intact microbial cells. To ensure optimal recovery of microbial DNA, samples should be fresh. If storage or transportation is required, this should preferably be done at 2-8°C and not frozen or thawed, as freezing and thawing can damage the integrity of the microbial cells and therefore result in the loss of exposed microbial DNA during host DNA removal.8. To avoid false results due to contamination, keep the work area clean, wear protective clothing, and set up controls for quality control. Use appropriate measures to handle sample materials to minimize the risk of cross-contamination. During the extraction process, use DNA-free pipette tips and consumables, and cap reagents immediately after use to prevent contamination. procedure1. Sample pre-treatment: 1a: For swab samples, swirl the swab portion of the swab in 0.5 ml PBS for at least 20 s. Squeeze the swab several times against the wall of the tube before removing it so that as much of the bacterial fluid as possible can be squeezed out of the swab to minimize sample loss. 1b: For viscous samples, e.g. sputum, take ~500 µl of sample, add 1.5 times the volume (~750 µl) of Buffer GB1 and incubate at 37°C, 600 rpm for 15-30 min until the sample is completely liquefied.Note: The sample volume can be increased or decreased appropriately and the amount of Buffer GB1 added adjusted accordingly.1c: For alveolar lavage fluid containing a small amount of viscous sputum, centrifuge as much of the alveolar lavage fluid as possible, carefully remove the supernatant, and retain the lower viscous fraction (containing sputum, cells, and organisms), add 1.5 times the volume of Buffer GB1, and incubate for 15-30 min at 37°C, 600 rpm until the sample is completely liquefied.1d: For non-viscous body fluid samples such as blood and cerebrospinal fluid, liquefaction treatment is not required, and an appropriate amount of sample is taken directly, the operation of step 2 is carried out, and the cell precipitate is collected by centrifugation.2. Centrifuge at 10000 rpm for 5-10 min at room temperature and carefully discard the supernatant.Note: Do not disturb the lower cell sediment to avoid sample loss.3. Add 500 µl Buffer GB2, vortex to mix, and incubate at room temperature, 600 rpm for 10 min. 4. Centrifuge at 12000 rpm for 2 min and carefully remove the supernatant.Note: Do not disturb the bacterial precipitate when removing the supernatant to avoid sample loss.5. Add 200 µl of Buffer GB2 to the precipitate, add 2 µl of Benzonase and incubate for 30 min at 37°C, 600 rpm. 6. Centrifuge at 12000 rpm for 2 min, discard the supernatant, add 500 µl of Buffer GB2, vortex and wash the precipitate. Repeat the procedure once.7. Centrifuge at 12000 rpm for 2 min, discard the supernatant, and finally aspirate the residual Buffer GB2 with a small-volume tip. 8. Add 180 µl Lysozyme (10 mg/ml), resuspend the bacterial precipitate and transfer the bacterial resuspension to a Lysis Tube.9. The Lysis Tube is incubated at 37°C, 600 rpm for 20-30 min, then vortexed for 10 min or processed on a thermostatic homogenizer for 10 min at maximum vibration speed (2500-2900 rpm).10. Centrifuge briefly, add 20 µl proteinase K, vortex to mix, add 200 µl buffer GL, vortex to mix, and incubate for 30 min at 56°C, 600 rpm. Note: 1) Do not add Proteinase K directly to Buffer GL.2）For RNA removal, add 4 µl DNase-Free RNase A (100 mg/ml) before adding Buffer GL, shake to mix, and let stand at room temperature for 5-10 minutes.11. Centrifuge at 12000 rpm for 1 min and carefully aspirate the supernatant into a new centrifuge tube. Note: Do not aspirate the glass beads.12. Add 200 µl of anhydrous ethanol, vortex to mix, and centrifuge momentarily to collect the solution to the bottom of the tube. Note: The addition of anhydrous ethanol may produce a white precipitate that will not affect subsequent experiments.13. Add all of the solution from step 12, including the precipitate, to the Spin Columns DM in the collection tube, or transfer the solution several times if it cannot be added all at once. centrifuge at 12,000 rpm for 1 minute, pour off the waste from the collection tube, and return the column to the collection tube.14. Add 500 µl Buffer GW1 to the adsorbent column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 min, pour off the waste liquid from the collection tube, and put the adsorbent column back into the collection tube.15. Add 500 µl Buffer GW2 to the adsorbent column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorbent column back into the collection tube. Note: Step 15 can be repeated once if further improvement of DNA purity is required.16. Centrifuge at 12,000 rpm for 2 minutes and pour off the waste liquid in the collection tube. Leave the column at room temperature for a few minutes and dry thoroughly. Note: The purpose of this step is to remove residual ethanol from the adsorbent column; ethanol residue can interfere with subsequent enzymatic reactions (digestion, PCR, etc.).17. Place the adsorbent column in a new centrifuge tube (supplied), add 50 µl of Buffer GE to the center of the adsorbent column overhang, let stand at room temperature for 5 minutes, centrifuge at 12,000 rpm for 1 minute, collect the DNA solution, and store the DNA at -20 °C. Attention:1）If the downstream experiments are sensitive to pH or EDTA, sterilized water can be used for elution. The pH value of the eluent has a great influence on the elution efficiency. If the eluent is made of water, the pH value should be 7.0-8.5 (the pH value of water can be adjusted to this range with NaOH), and the elution efficiency is not high when the pH value is lower than 7.0.2）Incubation at room temperature for 5 minutes prior to centrifugation increases yield.3）If the final concentration of DNA is to be increased, the DNA eluate obtained in step 17 can be re-spiked onto the adsorbent membrane and step 17 repeated. 4）DNA stored in water will be affected by acidic hydrolysis. For long-term storage, it is recommended to elute with Buffer GE and store at -20℃... Read More | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export |