| Description | IntroductionHexokinase (HK, EC 2.7.1.1) is widely present in animals, plants, microorganisms, and cultured cells. It is the first key enzyme in the glucose degradation pathway, catalyzing the conversion of glucose to glucose-6-phosphate, which serves as the intersection point of glycolysis and the IntroductionHexokinase (HK, EC 2.7.1.1) is widely present in animals, plants, microorganisms, and cultured cells. It is the first key enzyme in the glucose degradation pathway, catalyzing the conversion of glucose to glucose-6-phosphate, which serves as the intersection point of glycolysis and the pentose phosphate pathway.Assay PrincipleHK catalyzes the synthesis of Glucose-6-Phosphate (G6P) from Glucose. Glucose-6-Phosphate Dehydrogenase (G6PDH) then further catalyzes the dehydrogenation of G6P, generating NADPH. NADPH has a characteristic absorption peak at 340 nm.Component48T96TStorageExtraction Buffer60 mL60 mL×22-8℃Reagent Ⅰ14 mL28 mL2-8℃Reagent Ⅱ1EA1EA-20℃. Store in the dark.Reagent Ⅲ1EA1EA-20℃. Store in the dark.Note: Please check the quantity of all components before starting the experiment. An additional 10% of each component is provided for standard curve preparation or pilot experiments.Required Materials and Equipment (Not Provided)TypeNameNotesInstrumentMicroplate ReaderMust be capable of measuring absorbance at 340 nmConsumables96-well UV PlateUV-transparent plateReagentsPhysiological SalineFor sample washingOtherHomogenizer (for tissue samples), Incubator, Ice box, Refrigerated centrifuge, Adjustable pipettes and tipsUsing a multichannel pipette is recommended for high-throughput experiments to improve efficiencyInstructions for Use1. Reagent Preparation试剂名称 Reagent NamePreparationNotesExtraction BufferReady-to-use; equilibrate to room temperature (RT) before use.Store at 4°CReagent ⅠReady-to-use; equilibrate to room temperature (RT) before use.Store at 4°CWorking Reagent ⅡPrepare immediately before use:• For 48T: Dissolve contents of Reagent Ⅱ in 10.8 mL Reagent Ⅰ• For 96T: Dissolve contents of Reagent Ⅱ in 21.6 mL Reagent ⅠKeep protected from light on ice during the experiment. Aliquot and store unused portions at -20°C protected from light for up to one month. Avoid repeated freeze-thaw cycles.Working Reagent ⅢPrepare immediately before use:1. Dissolve Reagent Ⅲ: • For 48T: in 0.5 mL Reagent Ⅰ • For 96T: in 1 mL Reagent Ⅰ2. Dilute the dissolved Reagent Ⅲ 10-fold with Reagent Ⅰ to make the Working Reagent Ⅲ.Keep protected from light on ice during the experiment. Aliquot and store unused portions at -20°C protected from light for up to one month. Avoid repeated freeze-thaw cycles.2. Sample PreparationNote: The use of fresh samples is highly recommended. HK activity decreases significantly upon sample freezing.2.1 Animal/Plant TissuesWeigh approximately 0.1 g of tissue. Add 1 mL of Extraction Buffer and homogenize on ice. Centrifuge the homogenate at 8000 g, 4°C for 10 min. Collect the supernatant and keep it on ice for assay.2.2 Cells, Bacteria, or FungiCollect 5×10⁶ cells/bacteria/fungi. Wash with pre-cooled physiological saline and centrifuge at 800 g for 2 min. Discard the supernatant. Add 1 mL of Extraction Buffer and disrupt the cells by sonication on ice (5 min total, 20% power or 200 W, pulse 3s on/7s off, repeat 30 times). Centrifuge the lysate at 8000 g, 4°C for 10 min. Collect the supernatant and keep it on ice for assay.2.3 Serum (or Plasma)Assay directly.3. Assay Procedure3.1 Microplate Reader Preparation: Preheat for at least 30 min. Set the wavelength to 340 nm.3.2 Working Solution Preparation: Prepare immediately before use. Each well requires 190 µL of Working Solution. It is recommended to prepare enough for 2 extra wells to account for pipetting loss.For a single well: Mix 180 µL of Working Reagent Ⅱ with 10 µL of Working Reagent Ⅲ.The Working Solution must be prepared fresh. Incubate it at 37°C for 10 min before the assay.3.3 Assay Setup: Pipette into wells of the 96-well UV plate as follows:ReagentTest Well (µL)Sample10Working Solution1903.4 Absorbance Measurement: Immediately after adding the Working Solution, mix thoroughly and measure the absorbance at 340 nm at 10 seconds (A₁) and again after exactly 10 minutes of incubation at 37°C (at 10 min 10 sec, A₂).4. Result CalculationThe following derived and simplified calculation formulas are provided and are equivalent.4.1 Data ProcessingCalculate ΔA = A₂ - A₁.4.2 Sample HK Activity Calculation① Based on Sample Mass (U/g)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per gram of sample.Calculation:HK (U/g) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ × W) ÷ T × nSimplified Formula: HK (U/g) = 643.09 × ΔA ÷ W × n② Based on Cell/Bacteria/Fungi Count (U/10⁴)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per 10⁴ cells/bacteria/fungi.Calculation:HK (U/10⁴) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ × 500) ÷ T × nSimplified Formula: HK (U/10⁴) = 643.09 × ΔA ÷ 500 × n③ Based on Liquid Volume (U/mL)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per milliliter of liquid.Calculation:HK (U/mL) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ) ÷ T × nSimplified Formula: HK (U/mL) = 643.09 × ΔA × n④ Based on Protein Concentration (U/mg prot)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per milligram of protein.Calculation:HK (U/mg prot) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ × Cpr) ÷ T × nSimplified Formula: HK (U/mg prot) = 643.09 × ΔA ÷ Cpr × nParameter Description:ε: NADPH molar extinction coefficient = 6.22 × 10³ L/mol/cmd: Light path of the 96-well UV plate = 0.5 cm10⁹: Conversion factor (1 mol = 1 × 10⁹ nmol)Vₜₒₜₐₗ: Total reaction volume = 200 µL = 2 × 10⁻⁴ LVₛₐₘₚₗₑ: Volume of supernatant added to the reaction = 10 µL = 1 × 10⁻⁵ LVₛₐₘₚₗₑₜₒₜₐₗ: Volume of Extraction Buffer added = 1 mLCpr: Sample protein concentration (mg/mL)W: Sample mass (g)T: Reaction time = 10 min500: Cell/Bacteria/Fungi count = 5 × 10⁶, expressed in units of 10⁴n: Sample dilution factorPrecautionsBefore formal testing, it is recommended to perform a pilot experiment using 2-3 samples expected to have significant activity differences.For tissue and cell samples, protein concentration measurement can be used to normalize results between samples.This kit is compatible with spectrophotometer detection. Adjust the preparation volumes of detection reagents proportionally according to the spectrophotometer's requirements.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please implement appropriate biosafety precautions throughout the experiment. Wear a lab coat, mask, gloves, head cover, and other protective equipment. Perform experiments in a fume hood or biosafety cabinet.This product is for scientific research use only. It is not intended for clinical diagnosis.Frequently Asked Questions (FAQ)1. What should I do if the measured ΔA is too high or too low?If ΔA > 0.5, the sample HK activity is too high. Dilute the supernatant appropriately with Extraction Buffer (include the dilution factor *n* in the calculation) or shorten the reaction time to 5 min.If ΔA < 0.005, the sample HK activity is too low. Increase the sample volume (keep the Working Solution volume constant and adjust the variable in the formula accordingly) or extend the reaction time (e.g., to 15 or 30 min).2. Can multiple samples be assayed simultaneously for high-throughput detection?The initial reaction rate is fast. It is not recommended to run a large number of samples simultaneously. If a multichannel pipette is unavailable, it is best for two individuals to perform the experiment together—one person timing and the other measuring the absorbance—to ensure the accuracy of the results... Read More | Product introduction：This kit uses uniqcell lysis and heme / protein precipitation technology, combined with DNA preparation membrane to selectively adsorb DNA to achieve the purpose of purifying genomic DNA.Scope of application：Nucleic acid extraction and purification | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export | The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export | DescriptionPhoto KitAlysis Starter Kit enables screening of 24 micro-scale simultaneous photocatalytic reactions with consistent and reproducible photon intensity. User guide is provided in the below hyperlink.Photo KitAlysis Operating InstructionsComponents:Photo KitAlysis LED ControllerBlue LED DescriptionPhoto KitAlysis Starter Kit enables screening of 24 micro-scale simultaneous photocatalytic reactions with consistent and reproducible photon intensity. User guide is provided in the below hyperlink.Photo KitAlysis Operating InstructionsComponents:Photo KitAlysis LED ControllerBlue LED Array (470 nm)Photo KitAlysis Reaction BlockTorque screwdriverSmall screwdriver to easily remove torqued screws after reaction is completeFeatures:Designed and tested by synthetic chemists.Controller provides repeatable milliamp selection for photon intensity0-30 mA variable LED output3 different LED options: blue (470 nm, included), green (527 nm, sold separately), and white (sold separately)Non-magnetic LED baseChemically resistant LED coverPTFE coated cablingDesigned to be used withPhoto KitAlysis High-Throughput Reaction Screening Kit(sold separately).Best when used withKitAlysis Benchtop Inertion Box(sold separately)... Read More |