| Description | IntroductionHexokinase (HK, EC 2.7.1.1) is widely present in animals, plants, microorganisms, and cultured cells. It is the first key enzyme in the glucose degradation pathway, catalyzing the conversion of glucose to glucose-6-phosphate, which serves as the intersection point of glycolysis and the IntroductionHexokinase (HK, EC 2.7.1.1) is widely present in animals, plants, microorganisms, and cultured cells. It is the first key enzyme in the glucose degradation pathway, catalyzing the conversion of glucose to glucose-6-phosphate, which serves as the intersection point of glycolysis and the pentose phosphate pathway.Assay PrincipleHK catalyzes the synthesis of Glucose-6-Phosphate (G6P) from Glucose. Glucose-6-Phosphate Dehydrogenase (G6PDH) then further catalyzes the dehydrogenation of G6P, generating NADPH. NADPH has a characteristic absorption peak at 340 nm.Component48T96TStorageExtraction Buffer60 mL60 mL×22-8℃Reagent Ⅰ14 mL28 mL2-8℃Reagent Ⅱ1EA1EA-20℃. Store in the dark.Reagent Ⅲ1EA1EA-20℃. Store in the dark.Note: Please check the quantity of all components before starting the experiment. An additional 10% of each component is provided for standard curve preparation or pilot experiments.Required Materials and Equipment (Not Provided)TypeNameNotesInstrumentMicroplate ReaderMust be capable of measuring absorbance at 340 nmConsumables96-well UV PlateUV-transparent plateReagentsPhysiological SalineFor sample washingOtherHomogenizer (for tissue samples), Incubator, Ice box, Refrigerated centrifuge, Adjustable pipettes and tipsUsing a multichannel pipette is recommended for high-throughput experiments to improve efficiencyInstructions for Use1. Reagent Preparation试剂名称 Reagent NamePreparationNotesExtraction BufferReady-to-use; equilibrate to room temperature (RT) before use.Store at 4°CReagent ⅠReady-to-use; equilibrate to room temperature (RT) before use.Store at 4°CWorking Reagent ⅡPrepare immediately before use:• For 48T: Dissolve contents of Reagent Ⅱ in 10.8 mL Reagent Ⅰ• For 96T: Dissolve contents of Reagent Ⅱ in 21.6 mL Reagent ⅠKeep protected from light on ice during the experiment. Aliquot and store unused portions at -20°C protected from light for up to one month. Avoid repeated freeze-thaw cycles.Working Reagent ⅢPrepare immediately before use:1. Dissolve Reagent Ⅲ: • For 48T: in 0.5 mL Reagent Ⅰ • For 96T: in 1 mL Reagent Ⅰ2. Dilute the dissolved Reagent Ⅲ 10-fold with Reagent Ⅰ to make the Working Reagent Ⅲ.Keep protected from light on ice during the experiment. Aliquot and store unused portions at -20°C protected from light for up to one month. Avoid repeated freeze-thaw cycles.2. Sample PreparationNote: The use of fresh samples is highly recommended. HK activity decreases significantly upon sample freezing.2.1 Animal/Plant TissuesWeigh approximately 0.1 g of tissue. Add 1 mL of Extraction Buffer and homogenize on ice. Centrifuge the homogenate at 8000 g, 4°C for 10 min. Collect the supernatant and keep it on ice for assay.2.2 Cells, Bacteria, or FungiCollect 5×10⁶ cells/bacteria/fungi. Wash with pre-cooled physiological saline and centrifuge at 800 g for 2 min. Discard the supernatant. Add 1 mL of Extraction Buffer and disrupt the cells by sonication on ice (5 min total, 20% power or 200 W, pulse 3s on/7s off, repeat 30 times). Centrifuge the lysate at 8000 g, 4°C for 10 min. Collect the supernatant and keep it on ice for assay.2.3 Serum (or Plasma)Assay directly.3. Assay Procedure3.1 Microplate Reader Preparation: Preheat for at least 30 min. Set the wavelength to 340 nm.3.2 Working Solution Preparation: Prepare immediately before use. Each well requires 190 µL of Working Solution. It is recommended to prepare enough for 2 extra wells to account for pipetting loss.For a single well: Mix 180 µL of Working Reagent Ⅱ with 10 µL of Working Reagent Ⅲ.The Working Solution must be prepared fresh. Incubate it at 37°C for 10 min before the assay.3.3 Assay Setup: Pipette into wells of the 96-well UV plate as follows:ReagentTest Well (µL)Sample10Working Solution1903.4 Absorbance Measurement: Immediately after adding the Working Solution, mix thoroughly and measure the absorbance at 340 nm at 10 seconds (A₁) and again after exactly 10 minutes of incubation at 37°C (at 10 min 10 sec, A₂).4. Result CalculationThe following derived and simplified calculation formulas are provided and are equivalent.4.1 Data ProcessingCalculate ΔA = A₂ - A₁.4.2 Sample HK Activity Calculation① Based on Sample Mass (U/g)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per gram of sample.Calculation:HK (U/g) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ × W) ÷ T × nSimplified Formula: HK (U/g) = 643.09 × ΔA ÷ W × n② Based on Cell/Bacteria/Fungi Count (U/10⁴)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per 10⁴ cells/bacteria/fungi.Calculation:HK (U/10⁴) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ × 500) ÷ T × nSimplified Formula: HK (U/10⁴) = 643.09 × ΔA ÷ 500 × n③ Based on Liquid Volume (U/mL)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per milliliter of liquid.Calculation:HK (U/mL) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ / Vₛₐₘₚₗₑₜₒₜₐₗ) ÷ T × nSimplified Formula: HK (U/mL) = 643.09 × ΔA × n④ Based on Protein Concentration (U/mg prot)Definition: One unit of activity is defined as the amount of enzyme that generates 1 nmol of NADPH per minute per milligram of protein.Calculation:HK (U/mg prot) = [ΔA × Vₜₒₜₐₗ ÷ (ε × d) × 10⁹] ÷ (Vₛₐₘₚₗₑ × Cpr) ÷ T × nSimplified Formula: HK (U/mg prot) = 643.09 × ΔA ÷ Cpr × nParameter Description:ε: NADPH molar extinction coefficient = 6.22 × 10³ L/mol/cmd: Light path of the 96-well UV plate = 0.5 cm10⁹: Conversion factor (1 mol = 1 × 10⁹ nmol)Vₜₒₜₐₗ: Total reaction volume = 200 µL = 2 × 10⁻⁴ LVₛₐₘₚₗₑ: Volume of supernatant added to the reaction = 10 µL = 1 × 10⁻⁵ LVₛₐₘₚₗₑₜₒₜₐₗ: Volume of Extraction Buffer added = 1 mLCpr: Sample protein concentration (mg/mL)W: Sample mass (g)T: Reaction time = 10 min500: Cell/Bacteria/Fungi count = 5 × 10⁶, expressed in units of 10⁴n: Sample dilution factorPrecautionsBefore formal testing, it is recommended to perform a pilot experiment using 2-3 samples expected to have significant activity differences.For tissue and cell samples, protein concentration measurement can be used to normalize results between samples.This kit is compatible with spectrophotometer detection. Adjust the preparation volumes of detection reagents proportionally according to the spectrophotometer's requirements.Biochemical reagents are generally irritating and biologically toxic. For your safety and health, please implement appropriate biosafety precautions throughout the experiment. Wear a lab coat, mask, gloves, head cover, and other protective equipment. Perform experiments in a fume hood or biosafety cabinet.This product is for scientific research use only. It is not intended for clinical diagnosis.Frequently Asked Questions (FAQ)1. What should I do if the measured ΔA is too high or too low?If ΔA > 0.5, the sample HK activity is too high. Dilute the supernatant appropriately with Extraction Buffer (include the dilution factor *n* in the calculation) or shorten the reaction time to 5 min.If ΔA < 0.005, the sample HK activity is too low. Increase the sample volume (keep the Working Solution volume constant and adjust the variable in the formula accordingly) or extend the reaction time (e.g., to 15 or 30 min).2. Can multiple samples be assayed simultaneously for high-throughput detection?The initial reaction rate is fast. It is not recommended to run a large number of samples simultaneously. If a multichannel pipette is unavailable, it is best for two individuals to perform the experiment together—one person timing and the other measuring the absorbance—to ensure the accuracy of the results... Read More | Product introduction：Reporter gene detection is an important tool for analyzing the interaction between potential cis elements (such as promoters, enhancers and silencers) and trans acting factors in the flanking region of structural genes in the field of modern molecular biology. Firefly Product introduction：Reporter gene detection is an important tool for analyzing the interaction between potential cis elements (such as promoters, enhancers and silencers) and trans acting factors in the flanking region of structural genes in the field of modern molecular biology. Firefly luciferase is widely used in gene regulation and drug screening. Firefly luciferase is a protein with a molecular weight of about 61 KD. In the presence of ATP, magnesium ions and oxygen, it can catalyze the production of oxyluciferin from luciferin. In the process of luciferin oxidation, it will produce a light signal. The optical signal of this kit is a kind of instantaneous light, which needs to be detected immediately after adding the working solution. The half-life of optical signal is about 5 min.Instruction：1.Working fluid configuration ( 1 ) Restore all components to room temperature. ( 2 ) The component B ( stock solution ) was fully diluted with component A to prepare a 0.2 mg / mL firefly luciferase working solution, which was vortexed and shaken to ensure full mixing. Note : The firefly luciferase working solution cannot be repeatedly frozen and thawed. If the dosage of a single experiment is small, it is recommended to subpackage according to a single dosage. At room temperature, the activity decreased by about 10 % after the working solution was configured for 3 h, and the activity decreased by about 25 % after 5 h. 2.chemiluminescence value detection ( 1 ) The cell culture plate was taken out from the incubator and incubated at room temperature for 20 min to restore it to room temperature ( 22-25 ° C ). ( 2 ) Add the same volume of firefly luciferase working solution with the medium to the culture plate and mix well. ( 3 ) Incubation at room temperature for 5 min. Note : The incubation time can be adjusted according to cell type and cell number. ( 4 ) The values were read by multifunctional microplate reader or chemiluminescence instrument ( instrument parameters : the determination time was 10 s, the determination interval was 2 s ).Matters needing attention：1. please centrifuge the product to the bottom of the tube immediately before use, and then conduct subsequent experiments. 2. the strongest wavelength of bioluminescence catalyzed by firefly luciferase is 560 nm. 3. to prevent interference between holes, it is recommended to use white opaque orifice plate.Recommendation：Component B is recommended to use sterile water in advance to configure 2 mg / mL storage solution, A component and B component configured as storage solution, and small batch packaging according to the experimental requirements. The detection working fluid is recommended to be used now to avoid repeated freezing and thawing. Component：One-Step Firefly Luciferase Assay Buffer；D-Luciferin Scope of application：Mainly used for ADCC detection... Read More | Inquire | This reagent kit uses an adsorption column that can specifically bind to viral RNA and a unique buffer system, suitable for isolating viral RNA from cell-free body fluids such as serum, plasma, urine, cerebrospinal fluid, and cell culture supernatants. The viral RNA specifically binds to the siliconThis reagent kit uses an adsorption column that can specifically bind to viral RNA and a unique buffer system, suitable for isolating viral RNA from cell-free body fluids such as serum, plasma, urine, cerebrospinal fluid, and cell culture supernatants. The viral RNA specifically binds to the silicon substrate membrane, and pollutants flow through the membrane. Completely remove impurities such as proteins through two efficient washes, and then wash high-purity viral RNA with RNase free water or RNase Free Water provided by the reagent kit. The virus RNA extracted by this kit can be directly used for experiments such as RT-PCR, Real time RT-PCR, and Western blot analysis. R666005Component50 TStorageR666005ABuffer GL15 mLRTR666005BBuffer RW140 mLRTR666005CBuffer RW2（concentrate）11 mLRTR666005DProteinase K12.5 mgRTR666005EProteinase K Storage Buffer1.25 mLRTR666005FRNase-Free Water10 mLRTR666005GSpin Columns RS with Collection Tubes50 setsRTR666005HRNase-Free Centrifuge Tubes（1.5 mL）50 EART Self prepared reagent: anhydrous ethanol, 0.9% NaCl.Preparation and important precautions before the experiment1. Add 1.25 ml of Protein K Storage Buffer to Protein K to dissolve it and store at -20 ℃. The prepared Protein K should not be left at room temperature for a long time to avoid repeated freeze-thaw cycles, which may affect its activity.2. To prevent RNase pollution, attention should be paid to the following aspects:1) Use RNase free plastic products and gun heads to avoid cross contamination.2) Glassware should be dry baked at a high temperature of 180 ℃ for 4 hours before use, while plastic containers can be soaked in 0.5 M NaOH for 10 minutes, thoroughly rinsed with water, and then sterilized under high pressure.3) Prepare the solution using water without RNase.4) Operators should wear disposable masks and gloves, and change gloves frequently during the experiment.3. Serum or plasma should avoid repeated freeze-thaw cycles that may cause protein denaturation or precipitation, reduce viral titers, and thus affect the yield of extracted viral nucleic acids.4. Before the first use, anhydrous ethanol should be added to Buffer RW2 according to the instructions on the reagent bottle label.5. If buffer GL precipitates, it can be heated at 56 ℃ to dissolve and then placed at room temperature.6. All centrifugation steps should be carried out at room temperature unless otherwise specified, and all operation steps should be carried out quickly.Operation steps1. Take 200 at room temperature µ Add serum or plasma to a 1.5 ml centrifuge tube (self provided). Attention: Less than 200 µ 0.9% NaCl (provided by the customer) can be added to make up for it.2. Add 20 to the solution in the previous step µ Protein K, mix well.3. Add 200 µ L Buffer GL, vortex oscillation for 15 seconds. Note: Do not directly add Protein K to Buffer GL. 4. Incubate at 56 ℃ for 15 minutes, briefly centrifuge, and collect the solution on the tube wall to the bottom of the tube.5. Add 250 µ Anhydrous ethanol, vortex for 15 seconds, incubate at room temperature for 5 minutes, briefly centrifuge, and collect the solution from the tube wall to the bottom of the tube.6. Add all the solution obtained in step 5 to the Spin Columns RS that have been loaded into the collection tube. If it is not possible to add all the solution to the adsorption column at once, please transfer it in two batches, centrifuge at 12000 rpm (~13400 × g) for 1 minute, discard the waste liquid in the collection tube, and put the adsorption column back into the collection tube.7. Add 500 to the adsorption column µ Centrifuge at 12000 rpm for 1 minute, discard the waste liquid from the collection tube, and place the adsorption column back into the collection tube.8. Add 500 to the adsorption column µ Buffer RW2 (check if anhydrous ethanol is added before use), centrifuge at 12000 rpm for 1 minute, discard the waste liquid in the collection tube, and place the adsorption column back into the collection tube.9. Add 500 to the adsorption column µ Centrifuge anhydrous ethanol at 12000 rpm for 1 minute, discard the waste liquid from the collection tube, and place the adsorption column back into the collection tube. 10. Centrifuge at 12000 rpm for 3 minutes and discard the waste liquid from the collection tube. Place the adsorption column at room temperature for a few minutes to thoroughly air dry.Attention:1) The purpose of this step is to remove residual ethanol from the adsorption column, which will affect subsequent enzymatic reactions (such as enzyme digestion, PCR, etc.).2) Recommended steps: Place the adsorption column into a new 1.5 ml centrifuge tube (provided), open the tube cover, and incubate in a 56 ℃ oven for 3 minutes to thoroughly dry the membrane of the adsorption column.11. Place the adsorption column in a new RNase free centrifuge tube and add 20-50 to the middle of the adsorption column in the air µ Place RNase Free Water at room temperature for 5 minutes, centrifuge at 12000 rpm for 1 minute, collect RNA solution, and store RNA at -70 ℃ to prevent degradation.Attention:1) The volume of RNase Free Water should not be less than 20 µ l. Small volume affects the recovery rate.2) If you want to increase RNA production, you can use 20-50 µ Repeat step 11 for the new RNase Free Water.3) If you want to increase the RNA concentration, you can add the obtained solution back to the adsorption column and repeat step 11... Read More | V669947 Component 50T Storage V669947A Buffer GL 15 mL RT V669947B Buffer GW1 (concentrate) 13 mL RT V669947C Buffer GW2 (concentrate) 15 mL RT V669947D Buffer RE 10 mL RT V669947E Proteinase K 12.5 mg RT V669947F Proteinase K Storage Buffer 1.25 mL RT V669947G Spin Columns RS with Collection Tubes V669947 Component 50T Storage V669947A Buffer GL 15 mL RT V669947B Buffer GW1 (concentrate) 13 mL RT V669947C Buffer GW2 (concentrate) 15 mL RT V669947D Buffer RE 10 mL RT V669947E Proteinase K 12.5 mg RT V669947F Proteinase K Storage Buffer 1.25 mL RT V669947G Spin Columns RS with Collection Tubes 50 RT V669947H RNase-Free Centrifuge Tubes (1.5 mL) 50 RTProductsThis kit is suitable for the extraction of viral RNA and DNA from fresh or frozen plasma, serum and cell-free body fluids. It is easy to operate as it does not require the use of organic solvents such as phenol and chloroform for extraction. The kit uses a unique buffer system to enable efficient and specific binding of viral nucleic acids in lysate to silica gel centrifugal adsorption columns. Inhibitors of PCR and enzyme reactions as well as residual impurities can be efficiently removed in a two-step effective rinsing step, and finally high purity viral nucleic acids can be obtained by using a low-salt buffer or water for elution. The purified viral nucleic acid is free of protein, nuclease and other impurities, and can be used directly in PCR, RT-PCR, Real-Time PCR, blotting experiments and so on.Self-contained reagent: anhydrous ethanol.Pre-experiment and Important Notes1. Add 1.25ml Proteinase K Storage Buffer to Proteinase K to dissolve it and store it at -20℃. Do not leave the prepared Proteinase K at room temperature for a long time, and avoid repeated freezing and thawing to avoid affecting its activity. Do not add Proteinase K directly into Buffer GL.2. Repeated freezing and thawing of the sample should be avoided, as this may result in smaller DNA fragments and a decrease in the amount of extracted DNA.3. Avoid repeated freezing and thawing of serum or plasma, which can lead to protein denaturation or precipitation, reducing the viral titer and thus affecting the yield of extracted viral nucleic acids.4. Anhydrous ethanol should be added to Buffer GW1 and Buffer GW2 according to the label instructions of the reagent bottle before first use.5. Check Buffer GL for crystallization or precipitation before use. If crystallization or precipitation occurs, redissolve Buffer GL in a water bath at 56℃.Procedure1. Take a 1.5 ml centrifuge tube (self-provided) and add 20 µl Proteinase K.2. Add 200 µl serum or plasma to the centrifuge tube. Add 200µl Buffer GL and vortex and shake for 15 seconds.Note: 1) Sample volume less than 200 µl can be made up by adding 0.9% NaCl (self-provided). 2) In order to ensure effective lysis of the sample, the sample needs to be mixed well with Buffer GL after adding Buffer GL.3. Incubate at 56°C for 15 minutes, centrifuge briefly, and collect the solution from the wall of the tube to the bottom of the tube.4. 250 µl of anhydrous ethanol was added, vortexed and shaken for 15 seconds, left at room temperature for 5 minutes, centrifuged briefly, and the solution on the wall of the tube was collected at the bottom of the tube.Note: If the ambient temperature exceeds 25°C, anhydrous ethanol should be used after pre-cooling on ice.5. Add the solution obtained in step 4 to the adsorbent column (RNase-Free Columns RS) that has been loaded into the collection tube, and if the solution cannot be added at one time, it can be transferred in several times. centrifuge the column at 12,000 rpm (~13,400 × g) for 1 min, pour off the waste liquid in the collection tube, and put the column back into the collection tube.6. Add 500 µl of Buffer GW1 to the adsorption column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorption column back into the collection tube.7. Add 500 µl of Buffer GW2 to the adsorption column (check that anhydrous ethanol has been added before use), centrifuge at 12,000 rpm for 1 minute, pour off the waste liquid in the collection tube, and put the adsorption column back into the collection tube.Note: Step 7 can be repeated if further DNA purity is required.8. Add 500 µl of anhydrous ethanol to the adsorbent column and centrifuge at 12,000 rpm for 1 min. Pour off the waste liquid in the collection tube and put the adsorbent column back into the collection tube.9. Centrifuge at 12,000 rpm for 3 minutes and pour off the waste liquid in the collection tube. Leave the adsorption column at room temperature for several minutes to dry thoroughly.Note: The purpose of this step is the removal of residual ethanol from the adsorbent column; ethanol residue can interfere with subsequent enzymatic reactions (digestion, PCR, etc.).10. Place the adsorption column in a new collection tube (RNase-Free Centrifuge Tube), add 20-150 µl of Buffer RE or sterilized water overhanging the middle of the adsorption column membrane, leave it at room temperature for 2-5 minutes, and then centrifuge it at 12,000 rpm for 1 minute to collect the nucleic acid solution.Note: 1) If the downstream experiment is sensitive to pH or EDTA, you can use sterilized water for elution. The pH of the eluent has a great influence on the elution efficiency, if water is used as the eluent it should be ensured that its pH is 7.0-8.5 (the pH of water can be adjusted to this range with NaOH), and the elution efficiency is not high when the pH is lower than 7.0.(2) For long-term storage, please store the DNA solution at -20℃ and the RNA solution at -70℃.3) If the final concentration of DNA/RNA is to be increased, the DNA/RNA eluate obtained in step 10 can be re-spiked onto the adsorbent membrane and step 10 repeated... Read More |