Ultrapure Water System / Ultra Pure Water Systems

Ultra pure water is water nearly or completely devoid of contaminants. Ultrapure water systems are an important component for laboratories across markets including manufacturing and the semi-conductor industry. These ultra pure water systems remove chemical contaminants through de-ionization (DI) and reverse osmosis. An ultra pure water system eliminates bacteria with UV radiation. These laboratory water purification systems can achieve up to 18.2 MOhm-cm in resistivity (high resistivity indicating low levels of anionic contamination) and can reduce organic carbon to less than 50 ppb. An ultrapure water system is equipped with ultra filters to remove endotoxins, DNase and Rnase left over from bacteria destroyed by UV, resulting in extremely low total organic carbon (TOC). Additional carbon filters in these laboratory water purification systems reduces the need for pre-treatment, permitting tap water as a source.

Find, compare, and request a quote for ultrapure water systems across leading suppliers at Labcompare; including access to product citations, related published figures, and first-hand reviews from our scientific community.

CompanyStakpure GmbHStakpure GmbHStakpure GmbH
ItemOmniaTapOmniaLabDSOmniaPure xsbasic
Price
DescriptionOmniaTap is the powerful all-rounder for simultaneous production of Type I ultrapure water and Type II pure water from a single unit. Available in 12 or 20 L/h configurations with optional UV-TOC monitoring and ultrafiltration. Connects directly to tap water. OptiFill touch dispenser with precise ... Read MoreThe OmniaLabDS is a CLRW/CLSI-grade pure water system designed for feeding clinical analyzers, steam sterilizers, and washer-disinfectors. Available in 20, 40, and 60 l/h output models, it features a 100 L pressurized tank with quality recirculation, regenerative polishing cartridges, a 0.2 µm ... Read MoreCompact, area-efficient ultrapure water (Type I) system with OptiFill basic OneHand dispenser. Delivers 18.2 MO·cm resistivity and TOC <10 ppb (standard) or <5 ppb (UV variant). Integrated leakage sensor, pressure reducer, and pre-treatment cartridge. Bench or wall mountable. Available as standard (... Read More
MethodReverse osmosis (RO) + ion exchange (ultrapure water cartridge) + sterile filtration 0.2 µm; UV lamp for TOC reduction (UV-TOC models); ultrafiltration/bio filter capsule (UV-TOC/UF model)RO cartridge ? stainless steel regenerative polishing cartridge ? 0.2 µm sterile filter capsule ? UV disinfection; sterile overflow and sterile vent filter + CO2 absorber included; optional UV tank disinfection and emergency supplyIon exchange with integrated pre-treatment cartridge; UV lamp (UV variant); recirculation function to prevent biofilm
Output12 or 20 L/h (Type II pure water at 15°C); up to 2 L/min dispensing performance (Type I ultrapure water)20 l/h (OmniaLabDS20), 40 l/h (OmniaLabDS40), 60 l/h (OmniaLabDS60) at 15°CUp to 2 L/min
ResistivityType I: 18.2 MO·cm at 25°C; Type II: 15 down to 10 MO·cm at 25°C10 up to 1 MO·cm18.2 MO·cm at 25 °C
DimensionsWithout tank (with OptiFill dispenser): 390 x 720 x 525 mm (W x H x D); With 10-L docking tank: 390 x 720 x 615 mm (W x H x D)Tower: 511 x 1520 x 575 mm (W x H x D); Base cabinet (tank): 511 x 800 x 575 mm (W x H x D)240 x 530 x 435 mm (W x H x D)
Total Organic Carbon (TOC)Type I ultrapure water: <5 ppb (UV-TOC and UV-TOC/UF models); <10 ppb (base OmniaTap model). TOC monitor included on UV-TOC and UV-TOC/UF models only.< 2 ppm (feed water requirement)<10 ppb (standard); <5 ppb (UV variant)
Get Quote

Articles