Description | AQUA SOLUTIONS' Type II DI for Hydrogen Generator Water Systems are custom-designed to support Proton Energy Systems' HOGEN® GC, HOGEN® 20, and HOGEN® 40 hydrogen generators on a world-wide basis. We designed them this way in order to make sure that they will work, no matter where-in-AQUA SOLUTIONS' Type II DI for Hydrogen Generator Water Systems are custom-designed to support Proton Energy Systems' HOGEN® GC, HOGEN® 20, and HOGEN® 40 hydrogen generators on a world-wide basis. We designed them this way in order to make sure that they will work, no matter where-in-the-world you install them!
Features quick-disconnect snap-in module and produces virgin (not regenerated) ion exchange resin.
Features
- The system price includes one installed plus one spare Purification Kit.
- Made in the USA.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
Additional Features for Model H-40-C and Model H-40-C-H
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water.
All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water.
All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The System price includes two purification modules: one installed and one spare.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Made in the USA.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
- Certified by CSA for the US & Canada, CE marked for export to EU countries.
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Ultra-Low TOC Biological Grade Type I DI Systems include a built-in dual-wavelength ultraviolet (UV) oxidizer/sterilizer to reduce TOC the lowest possible levels, and a built-in ultrafilter (UF) to reduce pyrogen, endotoxin, RNase and DNase. This combination of UV-UF also results in water that has no RNase or DNase activity.
Features
- Made in the USA
- Ultrafilter - Removes Pyrogen, Endotoxin, RNase, & DNase
- Dual wavelength - Reduces TOC levels to <5 ppb="" and="" prevents="" the="" growth="" of="" microorganisms="" within="" the="" system="">5>
- 6,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The system includes one installed plus one spare DI Module.
- Made in the USA.
- The sensor displays a Green LED when water quality is >2-megohm-cm and a Red LED flashes when it’s time to change DI Modules.
- One (1) year warranty.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems are available in Standard (2-3 Liters/Min) and High Flow/Capacity (4-10 Liters/Min) versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems produce AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems are available in Standard (2-3 Liters/Min) and High Flow/Capacity (4-10 Liters/Min) versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Ultra-Low TOC Grade systems include a combination built-in ultraviolet (UV) oxidizer/sterilizer to reduce TOC the lowest possible levels.
Features
- Built-in combination ultraviolet (UV) oxidizer/sterilizer
- 18 megohm-cm Type I Reagent Grade Water at 3-5 ppb TOC
- Continuous recirculation ensures superior water quality at all times
- Highest flow rate (2-3 Liters per Minute) of any comparably sized system
- Highest ion exchange capacity (4,000 grains) of any comparable system
- Built-in activated carbon prefilter reduces particulates & organics for longer DI module life
- Digital, temp-compensated resistivity monitor with red/green LED alarm set point
- Teflon recirculating remote dispenser with 0.10 µm final filter capsule
- System can be bench, shelf or wall-mounted at no extra charge
- Two (2) year system warranty (US & Canada only)
... Read More |