| Description | The PIPETMAN® M96 multi-tray is a convenient accessory that simplifies pipetting procedures, sliding the tray from one microplate to the next. It is compatible with SLAS-standard labware, including 96- and 394-well microplates and reservoirs, and is designed to make tasks such as serial dilutions The PIPETMAN® M96 multi-tray is a convenient accessory that simplifies pipetting procedures, sliding the tray from one microplate to the next. It is compatible with SLAS-standard labware, including 96- and 394-well microplates and reservoirs, and is designed to make tasks such as serial dilutions and plate-to-plate transfers easier. Its sliding mechanism enables efficient movement between positions, optimizing space and saving valuable time during pipetting applications. For increased productivity and minimal plastic waste, the use of PIPETMAN® DIAMOND Tips Blister Refills and Reload Packs is recommended.... Read More | Coupon for full risk maintenance/repair valid for 36 months from the date of issue
The coupon entitles the repair and calibration of any brand and model micropipette.
The full risk coupon includes:
Cleaning and decontamination of the pipette Replacement of worn-out components such as: Tip holder Coupon for full risk maintenance/repair valid for 36 months from the date of issue
The coupon entitles the repair and calibration of any brand and model micropipette.
The full risk coupon includes:
Cleaning and decontamination of the pipette Replacement of worn-out components such as: Tip holder O-ring Seal Piston Any additional necessary spare parts Calibration according to specifications in compliance with ISO 8655-2 Issuance of the calibration report with the results of the accuracy and precision measurements performed One coupon is required for each pipette. For P5000 pipettes, P10ML, multi-dispensing and multi-channel pipettes, two coupons are needed.
Each pipette is returned to the sender with its corresponding calibration document and a 6-month warranty on the replaced spare parts.
If the pipette is not repairable, it will be returned to the sender along with the coupon attached to it.
THE GILSON ITALY SERVICE CENTER IS THE ONLY AUTHORIZED SERVICE CENTER FOR THE REPAIR AND CALIBRATION OF GILSON PIPETTES.
Technical interventions on pipettes are carried out by specialized and qualified technical staff from Gilson Italy, using original spare parts and Accredia-certified instruments. Our pipettes are designed, manufactured, and calibrated according to the specifications and methods of the ISO 8655 standard. The service is ISO 9001:2015 certified.
Maintenance, control, and calibration interventions for pipettes will take place at our Gilson Italy S.r.l. Technical Assistance Center located at Via Matteotti, 98 – 20092 Cinisello Balsamo (MI).... Read More | The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.
Pulse-free Liquid Transfer Utilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.
Flow Rates to Meet Your Needs With a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications.- Standard Models (1, 2, 4, or 8 channels): 0.3 µL/min to 30 mL/min
- High Flow Models (2 or 4 channels): 1 mL/min to 220 mL/min
Easy to Operate MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. This tubing kit includes the following part numbers: F1817745, F117744 and F1179941.... Read More | The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.
Pulse-free Liquid Transfer Utilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.
Flow Rates to Meet Your Needs With a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications.- Standard Models (1, 2, 4, or 8 channels): 0.3 µL/min to 30 mL/min
- High Flow Models (2 or 4 channels): 1 mL/min to 220 mL/min
Easy to Operate MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. This tubing kit includes the following part numbers: F117940, F117960 and F1179941.... Read More | The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.
Pulse-free Liquid Transfer Utilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.
Flow Rates to Meet Your Needs With a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications.- Standard Models (1, 2, 4, or 8 channels): 0.3 µL/min to 30 mL/min
- High Flow Models (2 or 4 channels): 1 mL/min to 220 mL/min
Easy to Operate MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. This tubing kit includes the following part numbers: F117943, F117963 and F117941.... Read More |