| Description | The Accelerometer is a handy measuring device for vibration analysis and machine monitoring in industry, production and maintenance. It is particularly suitable for rotating machines such as motors, pumps, gearboxes or fans, in order to detect imbalances, misalignments or bearing problems at an The Accelerometer is a handy measuring device for vibration analysis and machine monitoring in industry, production and maintenance. It is particularly suitable for rotating machines such as motors, pumps, gearboxes or fans, in order to detect imbalances, misalignments or bearing problems at an early stage. Thanks to its portable design, it can be used directly on site for quality control, commissioning or predictive maintenance.
The Accelerometer records the three most important vibration parameters – acceleration, velocity and displacement – and displays them simultaneously on the screen. The frequency ranges are 10 Hz to 10 kHz for acceleration and 10 Hz to 1 kHz for velocity and displacement. These values enable precise measurements of both high-frequency vibrations, such as those occurring in gearboxes, and low-frequency movements of slow-running machines.
Technically, the Accelerometer is based on a piezoelectric acceleration sensor, which ensures high measurement accuracy, exact repeatability and a wide frequency range. The measured values are shown on a 4-digit, 2-inch LCD display that supports both metric and imperial units. Practical functions such as MAX-Hold allow the highest measured value to be stored. With its robust design, low weight (123 g), compact dimensions and rechargeable battery, the Accelerometer is particularly mobile and easy to use. The Accelerometer is specifically suitable for operational use in maintenance, for service technicians, mechanical engineers and quality assurance departments that need to monitor machine conditions. The device can also be used in training courses or technical laboratories to demonstrate vibrations and their effects. The Accelerometer allows precise statements to be made about the condition of machines, reduces the risk of failure and extends the service life of critical components.... Read More | The state-of-the-art Clamp Meter enables precise and comprehensive measurements in the areas of current, voltage, frequency, power, energy flicker and harmonics. It has been specially developed to provide reliable data both in industrial applications and when analyzing photovoltaic or inverter The state-of-the-art Clamp Meter enables precise and comprehensive measurements in the areas of current, voltage, frequency, power, energy flicker and harmonics. It has been specially developed to provide reliable data both in industrial applications and when analyzing photovoltaic or inverter systems.
Simultaneous monitoring of all three phases and the neutral conductor provides a complete picture of the electrical system. The efficiency measurement of inverters allows a detailed analysis of the energy conversion, while the grid signal monitoring continuously detects deviations and faults. This Clamp Meter is therefore an indispensable tool for professional energy analyses.
Thanks to modern communication interfaces such as Wifi, the Clamp Meter can be easily integrated into existing systems and enables wireless analysis of measurement data. The integrated logger function and the memory reliably save all relevant data for later analysis.
An integrated oscilloscope function allows the visual display of signal curves, including inrush currents, and thus supports the analysis of transient phenomena. The 7.8-inch touch display ensures intuitive operation and a clear presentation of all measured values, diagrams and analysis functions. The Clamp Meter fulfils the requirements of IEC 61000-4-30 Class A and thus guarantees standard-compliant analysis of the power quality parameters.
This Clamp Meter combines precision, versatility and modern user-friendliness and is ideal for energy analyses, fault diagnostics and efficiency tests in complex electrical systems.... Read More | The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc. The CO2 / carbon dioxide measuring device helps to ensure that, for example, there is regular ventilation for employees in the office. The CO2 / carbon dioxide The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc. The CO2 / carbon dioxide measuring device helps to ensure that, for example, there is regular ventilation for employees in the office. The CO2 / carbon dioxide measuring device checks indoor air quality via the CO2 content. If the CO2 concentration is below 1000 ppm, the indoor air quality is optimal. Good indoor air quality helps to promote concentration. It is also ensured that the aerosol concentration in the air is low, as the aerosols are repeatedly mixed with fresh air. The CO2 / carbon dioxide measuring device shows the air quality as a numerical measured value and as a traffic light indicator. At the push of a button, the CO2 content of the last five hours can be shown on the display. In addition to the CO2 measuring function, the CO2 / carbon dioxide measuring device is equipped with a sensor for temperature and humidity.... Read More | The digital Torque Wrench combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its two intelligent operating modes, comprehensive protective functions and reliable 220 V power supply, this Torque Wrench is the ideal The digital Torque Wrench combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its two intelligent operating modes, comprehensive protective functions and reliable 220 V power supply, this Torque Wrench is the ideal solution for industrial, workshop and assembly applications.
In torque mode, the desired torque can be set quickly and continuously. The value can be conveniently adjusted using the operating buttons and the screwdriving process begins with a simple pull of the trigger. Torque + Angle Mode enables controlled tightening not only via the torque, but also via the angle of rotation - perfect for applications that require maximum precision.
Other highlights of the Torque Wrench include precise torque adjustment with high repeat accuracy, a multi-stage gearbox for reliable power transmission and alarm and control functions that help the user to assess the tightening result. Integrated protective functions such as temperature monitoring prevent overheating and extend the service life of the tool. Thanks to the mains-powered design, continuous work is possible without charging breaks.
Another highlight is the software supplied, which can be used to conveniently read out all the recorded screwdriving data. This allows users to document and analyze torque values, results and process data. The software also allows centralized settings to be made directly on the device.
The torque screwdriver is ideal for precise screw connections in mechanical and plant engineering. It also ensures reliable results when assembling wind turbines and steel structures. In the automotive sector, it is an indispensable tool for maintenance and repairs. It can also be used in a wide range of applications in heavy industry and construction.... Read More | The Voltmeter is a versatile meter that is used in various areas of electrical engineering and electronics. The Voltmeter enables precise measurements of voltage, current and resistance and supports both direct and alternating parameters. It also offers practical functions such as checking The Voltmeter is a versatile meter that is used in various areas of electrical engineering and electronics. The Voltmeter enables precise measurements of voltage, current and resistance and supports both direct and alternating parameters. It also offers practical functions such as checking electrical connections using continuity testing and testing diodes for functionality.
For specialised applications, the device offers additional functions such as capacitance and frequency measurement, temperature monitoring and non-contact voltage detection (NCV), which enables electrical fields and live wires to be reliably detected. The Voltmeter is equipped with overload protection, which prevents damage, particularly during high-current measurements, thanks to an integrated fuse. The meter is charged via a modern USB-C interface and it complies with the CAT III 1000 V and CAT IV 600 V safety standards, which ensures safe use even in demanding environments.
The device has three operating modes that can be easily switched via the menu. These modes are suitable for immediate measurements as well as for monitoring and recording maximum and minimum values with curve progression. The internal ring buffer for 8 measured values cannot be output via the interface. After setting threshold values, the multimeter can issue an alarm. The Voltmeter is therefore a reliable companion for professional users and hobby electronics engineers alike who require precise and versatile measurements.... Read More |