| Description | The Material Tester works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. It is ideal for measuring coating thicknesses on non-metallic substrates, such as plastic parts, wood or glass, as well as for determining the The Material Tester works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. It is ideal for measuring coating thicknesses on non-metallic substrates, such as plastic parts, wood or glass, as well as for determining the thickness of metallic base materials and coatings.
Thanks to its multi-layer measurement function, the Material Tester enables the precise analysis of complex material structures and multi-layer systems. The brilliant IPS color display ensures a razor-sharp display of all measured values, parameters and waveforms. The integrated waveform display allows precise control of the signal quality and thus contributes to the high measurement accuracy.
The sonic velocity can be individually adjusted to achieve optimum results for different materials. In addition, the Material Tester has 21 preset materials that are ready for immediate use. Thanks to the continuous measurement function, larger areas can also be checked quickly and efficiently.
Another advantage of the Material Tester is the internal memory for up to 999 data records, which can be used to easily document and later analyze measurement results. The stored data can be displayed directly on the device and, if required, conveniently read out, analyzed and exported in various formats using the PC software supplied.... Read More | Our Cable Detector enables the precise detection and localisation of power lines, wooden beams, metals and other objects such as water-filled plastic pipes in walls, floors and ceilings. Thanks to its versatility, it can be used on various surfaces such as wood, wallpaper, plaster, acoustic walls Our Cable Detector enables the precise detection and localisation of power lines, wooden beams, metals and other objects such as water-filled plastic pipes in walls, floors and ceilings. Thanks to its versatility, it can be used on various surfaces such as wood, wallpaper, plaster, acoustic walls and painted walls.
The device is equipped with a 1.9-inch colour LCD display that provides a clear visual representation of the scan results. A signalling system consisting of coloured LEDs, acoustic cues and directional arrows quickly provides precise information about the proximity and position of the detected object. The LED system indicates green for no obstacles, yellow for nearby objects and red for an obstacle directly under the scanner. The Cable Detector has three detection modes: the metal detection mode for identifying metal objects, the wood detection mode for localising wooden beams and the power mode for detecting live wires. In the metal and power line modes, the device displays the signal strength as a percentage. In wood detection mode, the scanner recognises both the exact centre and the edges of wooden beams, allowing their position and size to be precisely determined.
To further improve the accuracy, the sensitivity can be adjusted in three stages so that the detection can be optimally adapted to the respective conditions. An integrated marking hole makes it possible to mark the drilling site immediately after detection. The Cable Detector also offers automatic calibration, which can be performed on any wall surface. The menu is available in five languages: Russian, English, Portuguese, Japanese as well as Chinese. The automatic switch-off is adjustable and can vary between 5 and 15 minutes or be deactivated completely, depending on requirements. The acoustic signal can also be switched off if required. For reliable and wireless use, the device is equipped with a powerful lithium-ion battery that can be charged quickly and easily via a USB-C port.
With this powerful and user-friendly Cable Detector, obstacles can be reliably detected and construction and renovation work can be carried out safely and efficiently.... Read More | Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the air and sounds the alarm in good time to prevent accidents such as explosions or poisoning. Our Gas Detector / Gas Detection Instrument has been specially developed for use in homes, offices and similar indoor areas. It detects both natural gas (methane) and liquefied petroleum gas (LPG, consisting of propane and butane) and reacts as soon as a certain concentration is exceeded.
Our Gas Detector / Gas Detection Instrument measures gas concentrations in the range of 0 ... 100% of the lower explosion limit (LEL), whereby the alarm is triggered at 6% LEL. The response time is a maximum of 30 seconds and the alarm is triggered at a volume of over 70 decibels. A heat sensor is also integrated, which also triggers an alarm at an ambient temperature of 57°C / 134.6°F.
The detector is equipped with a color LCD display that shows the date and time as well as the gas values, the temperature and the remaining sensor life. A Wi-Fi connection is used to connect to the "Smart Life" app, which can be used to monitor the status of the device worldwide. In the event of an alarm, an acoustic and visual warning, a voice message and a push notification are sent to the smartphone. In addition, a connected valve can be activated automatically to stop the gas supply. The sensor has a service life of five years and the device requires a warm-up time of 180 seconds after switching on. The detector is supplied with 5V/1 A power via micro USB and consumes less than 200 mA.
The installation of the Gas Detector / Gas Detection Instrument depends on the type of gas used: for natural gas, which is lighter than air, the device is installed about 30 cm below the ceiling, for LPG, which is heavier than air, about 30 cm above the floor. The distance to the gas source should be 1.5 to 4 meters / 5 to 13 ft. The Gas Detector / Gas Detection Instrument can be attached either with screws or double-sided adhesive tape. Regular tests, which can also be carried out via the app or manually on the device, ensure that it is working properly.
Overall, the Gas Detector / Gas Detection Instrument offers a modern and reliable solution for the early detection of gas leaks and thus makes a significant contribution to increasing safety in rooms supplied with gas. This model of Gas Detector / Gas Detection Instrument combines modern technology with simple operation and is ideal for private and commercial applications.... Read More | Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress with their high load-bearing capacity, precise fit, and long service life – perfect for professional use in industry and assembly.... Read More | Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach areas / For FE and nFE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach areas / For FE and nFE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places. The handy metal housing is splash-proof to IP 64 for interference-free measurements in harsh environments. A coating thickness tester with flowing water protection is also available as an option. For a long service life with frequent measurements on rough surfaces, the measuring probe has a wear-resistant ruby probe pole.
With a single button and the self-explanatory, multilingual menu navigation, the Thickness Gauge is very easy to operate.
A Thickness Gauge is usually used in the quality assurance of coating processes. For example, to determine the paint thickness of a coating, when testing vehicles or steel structures or in fire protection (determining the coating thickness of steel doors). However, it is not only a Thickness Gauge, but can also be used to reliably measure rubber coatings, anodizing and galvanic coatings.
The Thickness Gauge uses a combined probe to measure insulating layers of paint, varnish, plastic, rubber, ceramic and galvanic coatings (excluding nickel) using the magnetic induction measuring method. The device is used on iron and steel substrates. It is also suitable for measuring insulating coatings (paint, plastic, etc.) using the eddy current method on non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steels in accordance with ISO 2178 and ISO 2360.
To further process your measurement data, you can connect your Thickness Gauge to mobile Android and iOS devices. Or you can communicate with a Windows PC. Wireless technology makes it possible. With the Lima Connect app, you can manage projects and allocate the measuring points on a photo. The measurement results can be statistically analysed and displayed graphically. The app for Android, iOS and Windows is free of charge.... Read More |