| Description | The Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of applicationThe Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The frequency weightings A, C and Z as well as the time weightings S (Slow), F (Fast) and I (Impulse) are supported in order to always ensure application-appropriate measurement behaviour.
The Condition Monitoring also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer. The internal 8 GB memory and optional SD cards with up to 64 GB provide sufficient storage capacity for extensive measurement campaigns. The high-resolution 4-inch TFT touch display ensures intuitive and convenient operation. Measured variables such as Lp, Lmax, Lmin, Leq, Lpeak, LN(1-99) and numerous other useful functions are displayed clearly and in detail, enabling professional detailed evaluation of the measurement results with this Condition Monitoring.
Its wide range of applications makes the Condition Monitoring the ideal solution for environmental noise monitoring, traffic noise analysis, noise exposure assessment, occupational health and safety monitoring and airport noise monitoring.
The software included in the scope of delivery extends the functionality considerably: it enables live data reception via Ethernet or WiFi, access to stored measurement data and the export of results as a PDF report or CSV file. In addition, the display of the measurement parameters can be freely configured within the software, allowing customisation to specific analysis requirements.... Read More | Air Quality Meter / Measures temperature and humidity / Visual and audible alarm / USB-C interface / Battery status indicator / Modern design and compact size
A Air Quality Meter is an important device for monitoring indoor air quality. It can be used in a variety of ways - whether in homes, officesAir Quality Meter / Measures temperature and humidity / Visual and audible alarm / USB-C interface / Battery status indicator / Modern design and compact size
A Air Quality Meter is an important device for monitoring indoor air quality. It can be used in a variety of ways - whether in homes, offices, workshops, schools or public facilities. The detector reliably measures the CO content in the air and makes it possible to recognize critical concentrations at an early stage and act accordingly.
The Air Quality Meter detects CO values in the range from 0 ... 500 ppm with a fine resolution of 1 ppm. It also measures the relative humidity in the range from 20 ... 85% (also with 1% resolution) and the temperature from -10 ... 50°C / 14 ... 122°F. If required, the temperature display can also be switched to Fahrenheit. All measured values are shown on a 2 inch LCD display.
In the event of increased CO values, the detector emits both visual and acoustic warning signals. An integrated traffic light function clearly displays the air quality: Green stands for 0 ... 100 ppm, orange for 101 ... 200 ppm and red for 201 ... 500 ppm. If the value exceeds 100 ppm, an additional acoustic warning signal sounds to indicate a potential health hazard.
Equipped with an integrated rechargeable lithium battery that can be conveniently charged via USB-C, the detector is particularly flexible to use. An integrated rubber strap makes it easy to transport and allows the device to be carried or hung up conveniently. With its compact dimensions of 70 x 70 x 28 mm / 2.8 x 2.8 x 1.1 in, modern design and easy handling, it is a practical helper in everyday life.
The Air Quality Meter is suitable for both private and professional use - for example in schools, care facilities, offices or industrial environments - wherever safe indoor air quality is crucial.... Read More | This Alcohol meter / Breathalyzer is ideal for personal use, for example for car drivers or people who want to regularly check their abilityto drive. With a measuring range of 0.01 ... 0.20 % BAC, the Alcohol meter / Breathalyzer delivers fast and precise results. The Alcohol meter / Breathalyzer This Alcohol meter / Breathalyzer is ideal for personal use, for example for car drivers or people who want to regularly check their abilityto drive. With a measuring range of 0.01 ... 0.20 % BAC, the Alcohol meter / Breathalyzer delivers fast and precise results. The Alcohol meter / Breathalyzer gives off a beeping sound at the beginning and end of the measurement. The Alcohol meter / Breathalyzer is very easy to use, after only about 10 seconds of blowing, the results are shown on the LC display, which shows the measured values in the corresponding colour of the traffic light display: Green means that the value is below 0.02 % BAC, yellow is displayed when the value exceeds 0.05 % BAC, and red appears when the value is 0.08 % BAC or more. In addition, you can hear a sound if the limit value is exceeded.
The Alcohol meter / Breathalyzer is compact and has a practical wrist strap. Our Alcohol meter / Breathalyzer is charged via USB-C cable and is equipped with an automatic switch-off after 2 minutes to protect the battery and ensure a longer service life. This Alcohol meter / Breathalyzer is therefore ideal for simply checking your ability to drive.... Read More | This HVAC Meter / HVACR Tester is a portable HVAC Meter / HVACR Tester that has been specially developed for the precise measurement of flow velocity in open channels, such as those found in rivers, streams or canals. The measurement is based on the proven velocity-area method.
The device has a This HVAC Meter / HVACR Tester is a portable HVAC Meter / HVACR Tester that has been specially developed for the precise measurement of flow velocity in open channels, such as those found in rivers, streams or canals. The measurement is based on the proven velocity-area method.
The device has a simple, light and handy structure and is characterized by low power consumption and comprehensive functions. Thanks to the integrated Hall velocity rotation sensor, this HVAC Meter / HVACR Tester can also be used reliably in wastewater environments.
The operation is characterized by a high degree of automation, which ensures stable and reliable operation. The measurement results are shown on an LCD display with LED backlighting. The measurement itself is carried out using the rod position measurement method.
This versatile HVAC Meter / HVACR Tester is the ideal instrument for a wide range of applications, including hydrological stations, environmental monitoring, irrigation and drainage of farmland and hydrogeological surveying. The HVAC Meter / HVACR Tester is your reliable tool for on-site flow velocity measurement.... Read More | The Material Tester is a high-quality measuring instrument designed for calibrating torque sensors and for the precise measurement of the tightening torque of screws and other fasteners. The Material Tester offers a high accuracy of ±1% within the range of 10% ... 100% of the scale and can be The Material Tester is a high-quality measuring instrument designed for calibrating torque sensors and for the precise measurement of the tightening torque of screws and other fasteners. The Material Tester offers a high accuracy of ±1% within the range of 10% ... 100% of the scale and can be operated in both clockwise and anti-clockwise directions.
The Material Tester supports several operating modes, such as Peak Hold, MAX, and real-time measurement. In Peak Hold mode, the maximum value is automatically stored, and the measurement data can be transferred via USB to the software, which also enables a pass/fail evaluation. Tolerance ranges can be set directly on the device, allowing values to be checked quickly. An integrated LED traffic light display shows the measured value at a glance.
The choice between the units Newton-meter (N·m), kilogram-force-centimeter (kgf·cm), and pound-force-inch (lbf·in) enables flexible applications across various industries. With a storage capacity of 2,000 measurement groups and the option of data transfer via USB, the measuring instrument is ideal for use in the mechanical engineering industry and in scientific research facilities.
The Material Tester operates reliably at ambient temperatures of 5 °C to 40 °C and is powered by a 7.2 V NiMH battery, which is optimized for mobile use.... Read More |