| Description | This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / Breathalyzer reliably measures the alcohol content in your breath.
With a measuring range of 0.00 to 0.400% BAC and a fine resolution of 0.001% BAC, the Alcohol meter / Breathalyzer delivers precise results in just a few seconds. An integrated voice output guides you step by step through the measurement. The result appears clearly legible on the LCD display, accompanied by a practical traffic light system: green: below 0.020% BAC, yellow: 0.020% - 0.080% BAC and red: from 0.080% BAC.
If a limit value is exceeded, an additional acoustic warning signal sounds. After a high measurement, the Alcohol meter / Breathalyzer automatically performs a short reset. The device has an internal memory for up to 100 measured values so that past results can be easily tracked.
The compact Alcohol meter / Breathalyzer is conveniently charged via USB-C cable and switches off automatically after around two minutes to save energy. Thanks to its simple operation, precise technology and user-friendly features, this Alcohol meter / Breathalyzer is the ideal tool for independent alcohol testing - whether at home, on the road or at work.... Read More | The Cable Detector is a versatile, reliable and precise measuring device for determining cable lengths using the proven transit time method. With this professional Cable Detector, cables can be reliably measured without having to unwind them - ideal for use in trade, electrical installation and The Cable Detector is a versatile, reliable and precise measuring device for determining cable lengths using the proven transit time method. With this professional Cable Detector, cables can be reliably measured without having to unwind them - ideal for use in trade, electrical installation and maintenance. The measuring range extends from 5 to 1500 (16.4 ... 4,921.3 ft) meters, and the device reliably detects short circuits and breaks in the cable.
Thanks to the integrated cable database with 86 different cable types and the option to teach in your own cables and set customized shortening factors, the Cable Detector is particularly flexible to use. Connection is convenient via 4 mm laboratory sockets with the crocodile clips supplied or via a BNC socket for coaxial cables. Cable cross-sections from 0.25 mm² to 16 mm² are supported, making the Cable Detector suitable for a wide range of applications.
A 2.8 inch display provides a clear presentation of all measurement results, while the multilingual menu enables simple and user-friendly operation. The measurement results can be stored internally and called up again on the device. With a battery life of up to 20 hours and compact dimensions, the Cable Detector is optimized for mobile use and is ideal for daily use on construction sites or in workshops.
The Cable Detector is therefore the perfect solution for anyone looking for a reliable, precise and handy measuring device for determining the length of electrical cables and diagnosing faults.... Read More | Replacement soldering tips for the PCE-ESI 100 (set of 3)
Chisel tip (flat, bevelled – for larger solder joints)
Tapered tip / pointed tip (tapering to a point – for precision work)
Flat tip (wider, straight-cut) | The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making a decisive contribution to the prevention of electrostatic discharge. Thanks to its compact design and ease of use, the device is ideal for both mobile use and stationary measurements and also serves as an ESD measuring device and electrostatic measuring device. Our measuring device covers a wide measuring range from 10³ ? to 10¹? ? and offers a measuring accuracy of 1 decade. The maximum display value is 20 G?; values above this indicate that the measuring range has been exceeded. The temperature measuring range is 0 ... 50°C / 32 °F ... 122°F with a deviation of ±2°C / ±3.6°F. An automatic switch-off after approximately five minutes ensures energy-saving operation, while the integrated backlight and data hold function allow for convenient reading of the measured values.
This Health & Safety has an easy-to-read 2.2-inch LCD display showing temperature, resistance, battery status and measurement mode. Three easy-to-use buttons control all functions, such as power on/off, temperature unit switching and data hold. Power is supplied by a 9 V block battery, allowing the Health & Safety to be operated independently of the mains. The Health & Safety also allows measurements to be taken on irregularly shaped objects and provides a clear evaluation of the measurement results: Values from 10³ to 10? ? indicate conductive materials, 10? to 10¹¹ ? indicate static dissipative properties, and from 10¹² ? onwards, surfaces are considered insulating. The device thus provides a quick and precise assessment of electrostatic properties and ensures greater safety and quality in sensitive production environments.
This measuring device is ideal for specialists in electronics manufacturing, ESD officers, technicians, engineers, testing laboratories and anyone who needs to check surfaces for electrical conductivity. As an ESD measuring device and electrostatic measuring device, it also provides reliable support in complying with electrostatic protection measures.... Read More | Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a semiconductor detector, the Radiation Detector provides reliable measured values after just one hour. It provides both short-term average values (updated hourly) and long-term average values (updated every 24 hours up to 1 year) for a detailed analysis of radon exposure. These values are stored in the device and updated regularly. After a battery change or by pressing the reset button, all stored data is deleted and the monitor is reset to the original measured value.
The e-paper display shows the values in Bq/m³ or pCi/L, depending on the selected unit, which can be set by the user. The device has an audible and visual alarm with colour coding: Green for values below 100 Bq/m³ (safe), yellow for values between 100 and 150 Bq/m³ (low exposure) and red for values above 150 Bq/m³ (high exposure).
With its dimensions of 103 x 103 x 33 mm, the Radiation Detector is particularly compact and can be set up or hung up. It is powered by AAA batteries and is therefore mobile and flexible in use. This makes the Radiation Detector ideal for use in residential, office, school and industrial buildings for fast and reliable monitoring of radon levels.... Read More |