| Description | PAT700 TOC Analyzer Overview
PAT700 Total Organic Carbon (TOC) Analyzers are specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection. - TOC, Uncompensated Conductivity and Temperature from just one
PAT700 TOC Analyzer Overview
PAT700 Total Organic Carbon (TOC) Analyzers are specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection. - TOC, Uncompensated Conductivity and Temperature from just one analyzer – can be fully calibrated and validated to USP<643> and USP<645>
- Low cost of ownership – 12 month service and calibration intervals
- Root-cause analysis support – water sample automatically taken if there is a TOC excursion
- All SOPs are pre-loaded into the PAT700, leading users step-by step with on-screen pictures and prompts
PAT700 TOC Analyzer Features
Low cost of ownership
- 12 month service intervals supported by auto-switching Main and Standby UV oxidation lamps with UV output monitoring
- No chemicals/reagents required – PAT700 just uses strong UV lamps to oxidize TOC
- No peristaltic pump tubing or pump heads to replace – PAT700 uses water system pressure to push sample into measurement cell for analysis
Root-cause analysis support
- User can pre-program the PAT700 so that at a pre-determined TOC level, it will capture a water sample which can then be later analyzed in the QC Lab to assist root cause analysis should a TOC excursion be detected
- On-board grab sampler allows the user to take samples from different locations/use points to support root cause analysis
Improved compliance
- PAT700 can be fully calibrated and validated for compliance to USP<643> for TOC and USP<645> for conductivity
- Complete oxidation to EP 2.2.44 requirements – the PAT700 ensures complete TOC oxidation through oxidation dynamic end-point detection
- 21CFR part 11 support – everyday users can view TOC and Conductivity results as a Guest without the ability to make any changes to the PAT700. Initial configuration and subsequent changes are protected through multi-level user name and password protection
- Dual-stream version available to demonstrate compliance both at the start and end of water loops simultaneously
Reduced training burden – no manual calculations/data entry
- All SOPs are pre-loaded into the PAT700, leading users step-by step with on-screen pictures and prompts
- All Calibration and System Suitability standards come with certified value data and use by dates programmed into an RFID tag on the bottle itself. Following the on-screen SOPs the user is prompted to load the bottles and the PAT700 then reads the RFID tags on the bottles. If the bottles have been loaded in the wrong order, or if they have expired the PAT700 provides a warning on the touch-screen. The PAT700 then uploads certified values, carries out the test and automatically calculates a pass/fail result and provides a report.
... Read More | The most powerful and comprehensive Biomek available.
- High-throughput
- 45 deck positions
- 0.5 - 5,000 µL pipetting volume range
- Single or dual heads
Biomek i7 Automated Workstation Features
Versatile Workspace
- Spacious, open-platform with grid-based deck
- Up to 45 deck positions
- Internal LED
The most powerful and comprehensive Biomek available.
- High-throughput
- 45 deck positions
- 0.5 - 5,000 µL pipetting volume range
- Single or dual heads
Biomek i7 Automated Workstation Features
Versatile Workspace
- Spacious, open-platform with grid-based deck
- Up to 45 deck positions
- Internal LED light
- Automated Labware Positioners (ALPs) for sample processing
- Optional enclosed version to protect samples from airborne particles
- Integrate additional devices on- or off-deck
- Configurable for specific applications
Flexible Pipetting and Workflow Management
- Multiple single- & dual-arm configurations with Multichannel heads (96/384/Pin tool) and/or Span-8 pipetting
- Large-volume 1 mL multichannel pipetting head
- High-access, rotating gripper(s) with unique offset finger design
- Disposable & fixed Biomek pipette tips (including septum piercing)
- Transfer volumes from 0.5 µL - 5,000 µL
- Independent Span-8 probe calibration
- 8 channel liquid-level sensing
- Supports labware from tubes to 1,536-well microplates
- Accurate intra-well pipetting
Simple System Operation
- Easily automate existing processes & execute quick workflow changes
- Powered by icon-based software with data tracking & LIMS connectivity
- Windows 10 OS
- Extend walk-away operation with process management and scheduling software
- Guided system setup
- Automated deck framing
- Data-driven method operations including hit-picking & normalization
- Light curtain safety feature
- Instrument status light bar
- DeckOptix cameras for live, remote-monitoring & on-error video capture
Application-focused Solutions
- Consultative workflow analysis
- Expert application & technical support
- Biomek-automated demonstrated methods & capabilities for genomic, drug discovery & basic research workflows
... Read More | The Cydem VT Automated Clone Screening System combines multiple trusted Beckman Coulter technologies into one advanced platform that empowers lab managers with a far more effective, high-throughput method—offering increased confidence that promising clones don’t get overlooked in the process of The Cydem VT Automated Clone Screening System combines multiple trusted Beckman Coulter technologies into one advanced platform that empowers lab managers with a far more effective, high-throughput method—offering increased confidence that promising clones don’t get overlooked in the process of consistently selecting the best.
- High-throughput clone screening in cell line development
- Automated, walk-away operation
- All results in one software
- pH-controlled fed-batch cultivation of 96 parallel clones with individual gassing
- On-deck cell count, viability and antibody titer analysis
- Fully integrated system
... Read More | For aqueous-based acoustic transfers
- Designed for biochemical and genomic sample and reagent transfer
- Improve data quality while saving on reagent costs
- Reagent reservoir for larger volume reagent transfers
Echo 525 Liquid Handler Features
Key Benefits
- Highly precise and accurate low volume
For aqueous-based acoustic transfers
- Designed for biochemical and genomic sample and reagent transfer
- Improve data quality while saving on reagent costs
- Reagent reservoir for larger volume reagent transfers
Echo 525 Liquid Handler Features
Key Benefits
- Highly precise and accurate low volume transfers enabling assay miniaturization
- Builds assays 50–100 times faster than traditional liquid handlers giving the lab higher capacity from one instrument
- Suite of Echo Software Applications guide creation of complex protocols for a variety of applications
- Eliminates pipetting variances that affect assay success
- Integrates into the Labcyte Access Laboratory Workstation for increased throughput
Build Complex Assays Quickly
The flexibility, speed, accuracy, and precision of the Echo 525 Liquid Handler enable researchers to build assays that are not possible with traditional liquid handlers. The use of acoustic sound energy removes the traditional boundaries of tip and pin tool based liquid handlers. Transfer variable fluid heights and viscosities from one source plate to enable rapid assay creation in one fluid transfer run. Say goodbye to fixed plate designs as the Echo Liquid Handler moves fluids from any well to any well enabling researchers to design the experimental plates they need to make new discoveries. Efficiently Transfer Build Reagents with Echo Qualified Reservoir
Assay assembly and the transfer of one reagent to many wells is simplified using the Echo Qualified Reservoir. With the capability of transferring up to 2.5 µL from each micro-well, you can build your assay without requiring an instrument change – saving time and money. Flexible and Reliable Transfer of Genomic Reagents
The Echo 525 Liquid Handler transfers a wide range of fluids during one transfer including distilled water, buffers, nucleic acids, and reagents containing up to 50% glycerol. With its versatile fluid range, transfer volume range, any well to any well transfer capability, and powerful applications software the Echo 525 Liquid Handler supports a wide range of genomic assay workflows: - Gene Synthesis
- PCR and qPCR assay set-up
- RNA and DNA NGS sequencing workflows
- Sanger sequencing assay set-up
- Single-cell sample preparation
... Read More | The OptiMATE Gradient Maker automates the preparation of density gradients for ultracentrifugation. Density gradient ultracentrifugation is a gradient-based purification system that provides precise purification of samples based on their differences in particle loading or densities. This system:
The OptiMATE Gradient Maker automates the preparation of density gradients for ultracentrifugation. Density gradient ultracentrifugation is a gradient-based purification system that provides precise purification of samples based on their differences in particle loading or densities. This system:
- Provides a software interface for creating a density gradient profile and layering samples
- Optimizes density gradient dispensing to reduce centrifugation time
- Automatically and rapidly dispenses a precise density gradient tube
- Automates the sealing of Beckman Coulter Quick-Seal centrifuge tubes
... Read More |
| Applications | Demonstrate compliance with the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection | Genomic, drug discovery & basic research workflows | Top clone screening in Cell Line Development | Biochemical and genomics reagent transfer | Density Gradient Centrifugation Sample Preparation |