| Description | Inquire | Moisture Analyser / Moisture Analyzer up to max. 95 cm³ sample volume / weighing range 200 g / adjustable heating temperature / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer is a precise device for determining dry matter and ash content in Moisture Analyser / Moisture Analyzer up to max. 95 cm³ sample volume / weighing range 200 g / adjustable heating temperature / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer is a precise device for determining dry matter and ash content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables exact measurements of the moisture content and the ash residue.
The device works on the principle of drying and incineration with simultaneous weight measurement. During the drying process, the weight loss is continuously recorded and displayed as a percentage of the total mass. Thanks to a heater output of 375 W and an adjustable heating temperature of 105 °C to 600 °C, the Moisture Analyser / Moisture Analyzer offers quick and flexible drying and incineration of samples. Various parameters are available for measurement evaluation: % moisture, % dry matter, % moisture bd, g residual weight / kg, residual weight, % residue on ignition and % loss on ignition. These measured values allow a detailed analysis and precise determination of the dry matter and ash content.
The Moisture Analyser / Moisture Analyzer has a customisable automatic power-off function with three individually adjustable criteria: detection start, weight decrease per detection interval and detection interval. These functions ensure flexible control of the drying process. In addition, the dry substance, residue on ignition and moisture content can also be determined using the timer, which can be set between 1 and 180 minutes. To manage samples, up to nine parameter combinations are available in the programme memory, which can be adapted to different sample types.
A menu lock with PIN prevents accidental adjustment of the parameters. The CAL menu item remains available to enable calibration at any time. The PreFlash function shortens the drying time at temperatures up to 180 °C and thus speeds up the entire process. The balance also has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles.
The device offers GLP-compliant output of all data via Data Bridge. Intermediate values can be printed at individually adjustable intervals. Data can be easily transferred via the serial RS-232 interface and USB. The integrated printer can be deactivated if required. Data can be transferred to a PC via a software which must be purchased separately. The moisture balance also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
The moisture balance is suitable for temperature-insensitive materials in various areas, such as building materials like cement, concrete and gravel. The moisture balance can also be used in the chemical industry and in biogas plants to reliably check the moisture content of powders, granulates, pastes and organic materials.... Read More | Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / Adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is suitable for Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / Adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
The moisture analyser works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 375 W and an adjustable heating temperature of 105 °C to 600 °C, the Moisture Analyser / Moisture Analyzer ensures fast and flexible drying of the samples. For measurement evaluation, the device offers various parameters such as % moisture, % dry mass, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function which stops the drying process when a constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes. Our device is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available. The balance also has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles.
Data can be transferred to a PC via a software which must be purchased separately. All data can also be output via the serial RS-232 interface and USB. The Moisture Analyser / Moisture Analyzer guarantees GLP-compliant documentation. The data is output via Data Bridge as the balance does not have a built-in printer. The Moisture Analyser / Moisture Analyzer also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
Our moisture analyser balance is suitable for temperature-insensitive materials and can be used in various areas. These include building materials such as cement, concrete and gravel, the chemical industry with powders, granulates and pastes as well as sewage treatment plants for analysing sewage sludge.... Read More | Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / adjustable heating temperature / 4-inch LC display / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / adjustable heating temperature / 4-inch LC display / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 375 W and an adjustable heating temperature of 105 °C to 600 °C, the Moisture Analyser / Moisture Analyzer ensures quick and flexible drying of the samples. For measurement evaluation, the device offers various parameters such as % moisture, % dry mass, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function which stops the drying process when the constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes.
Our device is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available.
The balance also has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles.
The moisture analyser balance offers GLP-compliant output of all data via Data Bridge. Intermediate values can be printed at individually adjustable intervals, if required. In addition, all data is transmitted via the serial RS-232 interface and USB. The printer can be deactivated, if required. Data can be transferred to a PC via a software which must be purchased separately.
The balance also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
Our Moisture Analyser / Moisture Analyzer is suitable for temperature-insensitive materials and can be used in various areas. These include building materials such as cement, concrete and gravel, the chemical industry with powders, granulates and pastes as well as sewage treatment plants for analysing sewage sludge.... Read More | The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference. The benchtop scale can determine the smallest weight differences thanks to a readability of 0.001 g. The results are displayed on the large LCD display. Up to 15 different drying programs can be stored in the memory of the benchtop scale. Accordingly, the benchtop scale is suitable for quality control of wood products, granules, pellets, feed, food, pastes and more. With the included 100 g weight, the benchtop scale can be calibrated at any time.... Read More |