| Description | The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
- Weighing range: 60 g
-
Readability: 0.1 mg = 0.0001 g / 0.001%.
-
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
- Weighing range: 60 g
-
Readability: 0.1 mg = 0.0001 g / 0.001%.
-
Drying temperature up to 160°C
-
Live graph of moisture content
-
Moisture content %
-
Dry content %
-
ATRO %
-
Weight
-
Product database for drying parameters
-
RS232 / USB interface
-
Storage on USB stick possible
... Read More | The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 digits, with a high resolution of 0.1 digits, so that even the smallest changes in moisture can be detected. The Damp Meter works non-destructively and measures the moisture content at a depth of 20 to 40 mm / 0.8 to 1.6 in without damaging the surface of the material. The measurement results are displayed both numerically and analogously on an easy-to-read 2.4-inch LCD display, the backlighting of which can be switched off if required. For easy evaluation of the moisture content, the Damp Meter has DRY, RISK, and WET modes, whose limit values can be set individually. It also offers practical measurement functions such as HOLD for holding values and MAX/MIN for recording maximum and minimum values. The integrated capacitive sensor ensures precise measurements, while the automatic switch-off after 30 minutes conserves the lithium battery. Charging is convenient via USB-C.
Thanks to its compact design and low weight, the Damp Meter is ideal for mobile use on construction sites, for construction supervision, or for assessing water damage. Craftsmen, site managers, or renovation specialists can use the device to quickly and reliably determine the moisture content in wood, concrete, screed, plaster, and other building materials. The Damp Meter thus offers a professional solution for anyone who needs precise, non-destructive moisture measurements.... Read More | The Damp Meter is a versatile measuring instrument for determining the moisture content in hardwoods, softwoods, and selected building materials. With its resistive measuring principle and robust ram electrode, the Damp Meter enables reliable and precise moisture measurements in up to 42 different The Damp Meter is a versatile measuring instrument for determining the moisture content in hardwoods, softwoods, and selected building materials. With its resistive measuring principle and robust ram electrode, the Damp Meter enables reliable and precise moisture measurements in up to 42 different types of wood. User-defined materials can also be added. Depending on the material, the measuring ranges extend from 3.5% to 150% wood moisture, with a high resolution of 0.1% and a repeat accuracy of ±0.5%. Temperature compensation can be performed both manually and automatically to ensure accurate results under different environmental conditions.
The Damp Meter has a 2.8"" LCD display that shows the current measurement value as well as the ambient temperature and humidity. Statistical functions such as the display of minimum, maximum, and average values support the evaluation of the measurement data. The measured values are stored internally, and the data can be easily transferred, analyzed, and archived via the USB-C interface and the supplied PC software. The menu navigation is available in several languages, including English, French, Spanish, and others. The Damp Meter is operated via clearly arranged function keys. Various measurement modes, such as the choice between % wood moisture and % water content, as well as the option to create user-defined materials, offer flexibility for different applications. The powerful LiPo battery ensures a long operating time of up to 22 hours. Thanks to its IP52 protection rating, the device is protected against dust and dripping water.
The Damp Meter is ideal for use in wood processing, construction, drying processes, and for quality control of wood and wood-based materials.... Read More | Moisture Analyser / Moisture Analyzer up to max. 95 cm³ sample volume / weighing range 220 g / adjustable heating temperature / GLP-compliant printout of all data / 4-digit device ID / software (optional)
Our Moisture Analyser / Moisture Analyzer is a precise device for determining moisture in Moisture Analyser / Moisture Analyzer up to max. 95 cm³ sample volume / weighing range 220 g / adjustable heating temperature / GLP-compliant printout of all data / 4-digit device ID / software (optional)
Our Moisture Analyser / Moisture Analyzer is a precise device for determining moisture in liquid and solid materials. The Moisture Analyser / Moisture Analyzer is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 250 W and an adjustable heating temperature of 40 °C to 180 °C, the Moisture Analyser / Moisture Analyzer ensures quick and flexible drying of the samples. For measurement evaluation, the device offers various parameters such as % moisture, % dry matter, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function that stops the drying process when a constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes. Our appliance is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available. The balance also has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles.
The Moisture Analyser / Moisture Analyzer offers GLP-compliant output of all data via the Data Bridge software. Intermediate values can be printed at individually adjustable intervals, if required. In addition, all data is transferred via the serial RS-232 interface and USB. The printer can be deactivated if required. Data can be transferred to a PC via software which must be purchased separately. The Moisture Analyser / Moisture Analyzer also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
The Moisture Analyser / Moisture Analyzer is suitable for moisture analysis in many industries, such as food and beverages (e.g. coffee, flour), pet food, chemical industry, pharmaceutical industry, agriculture, dairy processing, meat processing, wood industry, textile processing, recycling and sewage treatment plants. The Moisture Analyser / Moisture Analyzer provides reliable measurements for a wide range of temperature-insensitive materials.... Read More | Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / adjustable heating temperature / 4-inch LC display / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is Moisture Analyser / Moisture Analyzer for high temperatures up to max. 600°C / weighing range 200 g / adjustable heating temperature / 4-inch LC display / GLP-compliant printout of all data / software (optional)
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 375 W and an adjustable heating temperature of 105 °C to 600 °C, the Moisture Analyser / Moisture Analyzer ensures quick and flexible drying of the samples. For measurement evaluation, the device offers various parameters such as % moisture, % dry mass, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function which stops the drying process when the constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes.
Our device is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available.
The balance also has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles.
The moisture analyser balance offers GLP-compliant output of all data via Data Bridge. Intermediate values can be printed at individually adjustable intervals, if required. In addition, all data is transmitted via the serial RS-232 interface and USB. The printer can be deactivated, if required. Data can be transferred to a PC via a software which must be purchased separately.
The balance also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
Our Moisture Analyser / Moisture Analyzer is suitable for temperature-insensitive materials and can be used in various areas. These include building materials such as cement, concrete and gravel, the chemical industry with powders, granulates and pastes as well as sewage treatment plants for analysing sewage sludge.... Read More |