| Description | The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 digits, with a high resolution of 0.1 digits, so that even the smallest changes in moisture can be detected. The Damp Meter works non-destructively and measures the moisture content at a depth of 20 to 40 mm / 0.8 to 1.6 in without damaging the surface of the material. The measurement results are displayed both numerically and analogously on an easy-to-read 2.4-inch LCD display, the backlighting of which can be switched off if required. For easy evaluation of the moisture content, the Damp Meter has DRY, RISK, and WET modes, whose limit values can be set individually. It also offers practical measurement functions such as HOLD for holding values and MAX/MIN for recording maximum and minimum values. The integrated capacitive sensor ensures precise measurements, while the automatic switch-off after 30 minutes conserves the lithium battery. Charging is convenient via USB-C.
Thanks to its compact design and low weight, the Damp Meter is ideal for mobile use on construction sites, for construction supervision, or for assessing water damage. Craftsmen, site managers, or renovation specialists can use the device to quickly and reliably determine the moisture content in wood, concrete, screed, plaster, and other building materials. The Damp Meter thus offers a professional solution for anyone who needs precise, non-destructive moisture measurements.... Read More | PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. The moisture analyzer's halogen-heated drying chamber is suitable for the testing and analysis of samples of materials such as wood, pellets, biomass, granules, feed, food products and pastes.
Thanks to an impressive resolution or readability of 0.01 g / 10 mg, the moisture analyzer can determine the smallest weight differences. The moisture analyzer also covers the full moisture content range, from 0 ... 100%, with a moisture content resolution or readability of 0.1%. Measurement values are displayed clearly on the large, easy-to-read LCD screen.
The moisture analyzer features an adjustable drying time (1 ... 99 minutes) and an adjustable drying temperature (+40 ... +199 °C). Up to 16 different drying profiles or programs can be stored to the memory of the moisture analyzer, ensuring a controlled, repeatable testing process for accurate results time after time. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.... Read More | The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
- Weighing range: 60 g
-
Readability: 0.1 mg = 0.0001 g / 0.001%.
-
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
- Weighing range: 60 g
-
Readability: 0.1 mg = 0.0001 g / 0.001%.
-
Drying temperature up to 160°C
-
Live graph of moisture content
-
Moisture content %
-
Dry content %
-
ATRO %
-
Weight
-
Product database for drying parameters
-
RS232 / USB interface
-
Storage on USB stick possible
... Read More | The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference. The benchtop scale can determine the smallest weight differences thanks to a readability of 0.001 g. The results are displayed on the large LCD display. Up to 15 different drying programs can be stored in the memory of the benchtop scale. Accordingly, the benchtop scale is suitable for quality control of wood products, granules, pellets, feed, food, pastes and more. With the included 100 g weight, the benchtop scale can be calibrated at any time.... Read More | Accuracy to 0.01 %
The relative humidity meter PCE-MA 200 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the relative humidity meter dries the material to be weighed, and then Accuracy to 0.01 %
The relative humidity meter PCE-MA 200 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the relative humidity meter dries the material to be weighed, and then calculates the moisture content from the weight difference. The relative humidity meter can determine the smallest weight differences thanks to a readability of 0.001 g. The results are displayed on the large LCD display. Up to 15 different drying programs can be stored in the memory of the relative humidity meter. Accordingly, the relative humidity meter is suitable for quality control of wood products, granules, pellets, feed, food, pastes and more. With the included 100 g weight, the relative humidity meter can be calibrated at any time.... Read More |