| Description | The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 digits, with a high resolution of 0.1 digits, so that even the smallest changes in moisture can be detected. The Damp Meter works non-destructively and measures the moisture content at a depth of 20 to 40 mm / 0.8 to 1.6 in without damaging the surface of the material. The measurement results are displayed both numerically and analogously on an easy-to-read 2.4-inch LCD display, the backlighting of which can be switched off if required. For easy evaluation of the moisture content, the Damp Meter has DRY, RISK, and WET modes, whose limit values can be set individually. It also offers practical measurement functions such as HOLD for holding values and MAX/MIN for recording maximum and minimum values. The integrated capacitive sensor ensures precise measurements, while the automatic switch-off after 30 minutes conserves the lithium battery. Charging is convenient via USB-C.
Thanks to its compact design and low weight, the Damp Meter is ideal for mobile use on construction sites, for construction supervision, or for assessing water damage. Craftsmen, site managers, or renovation specialists can use the device to quickly and reliably determine the moisture content in wood, concrete, screed, plaster, and other building materials. The Damp Meter thus offers a professional solution for anyone who needs precise, non-destructive moisture measurements.... Read More | PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. The moisture analyzer's halogen-heated drying chamber is suitable for the testing and analysis of samples of materials such as wood, pellets, biomass, granules, feed, food products and pastes.
Thanks to an impressive resolution or readability of 0.01 g / 10 mg, the moisture analyzer can determine the smallest weight differences. The moisture analyzer also covers the full moisture content range, from 0 ... 100%, with a moisture content resolution or readability of 0.1%. Measurement values are displayed clearly on the large, easy-to-read LCD screen.
The moisture analyzer features an adjustable drying time (1 ... 99 minutes) and an adjustable drying temperature (+40 ... +199 °C). Up to 16 different drying profiles or programs can be stored to the memory of the moisture analyzer, ensuring a controlled, repeatable testing process for accurate results time after time. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.
... Read More | The Damp Meter is a versatile measuring instrument for determining the moisture content in hardwoods, softwoods, and selected building materials. With its resistive measuring principle and robust ram electrode, the Damp Meter enables reliable and precise moisture measurements in up to 42 different The Damp Meter is a versatile measuring instrument for determining the moisture content in hardwoods, softwoods, and selected building materials. With its resistive measuring principle and robust ram electrode, the Damp Meter enables reliable and precise moisture measurements in up to 42 different types of wood. User-defined materials can also be added. Depending on the material, the measuring ranges extend from 3.5% to 150% wood moisture, with a high resolution of 0.1% and a repeat accuracy of ±0.5%. Temperature compensation can be performed both manually and automatically to ensure accurate results under different environmental conditions.
The Damp Meter has a 2.8"" LCD display that shows the current measurement value as well as the ambient temperature and humidity. Statistical functions such as the display of minimum, maximum, and average values support the evaluation of the measurement data. The measured values are stored internally, and the data can be easily transferred, analyzed, and archived via the USB-C interface and the supplied PC software. The menu navigation is available in several languages, including English, French, Spanish, and others. The Damp Meter is operated via clearly arranged function keys. Various measurement modes, such as the choice between % wood moisture and % water content, as well as the option to create user-defined materials, offer flexibility for different applications. The powerful LiPo battery ensures a long operating time of up to 22 hours. Thanks to its IP52 protection rating, the device is protected against dust and dripping water.
The Damp Meter is ideal for use in wood processing, construction, drying processes, and for quality control of wood and wood-based materials.... Read More | Moisture Balances especially for plaster analysis / weighing range 220 g / infrared and quartz heater / adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Balances is a high-precision device that has been specially developed for plaster Moisture Balances especially for plaster analysis / weighing range 220 g / infrared and quartz heater / adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Balances is a high-precision device that has been specially developed for plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
The balance has two adjustable heating temperature ranges: 40 °C ... 180 °C and 105 °C ... 360 °C - which are made possible by two powerful radiant heaters: a 250 W infrared heater and a 375 W quartz heater. These heating elements ensure precise and efficient drying results and can be operated independently of each other in timer or automatic mode. For measurement evaluation, the device offers various parameters such as % moisture, % dry matter, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function, which stops the drying process when the constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes. Our device is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available. The Moisture Balances has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles. However, this function is only available in combination with the light emitter.
The Moisture Balances offers GLP-compliant output of all data via the Data Bridge software. Intermediate values can be printed at individually adjustable intervals if required. In addition, all data is transferred via the serial RS-232 interface and USB. The printer can be deactivated, if required. Data can be transferred to a PC via a software which must be purchased separately. The balance also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
Our Moisture Balances is ideal for the analysis of gypsum in various areas, such as mining, flue gas desulphurisation in coal-fired power plants and recycling. It enables the analysis of free moisture, chemically bound water as well as the degree of purity and water of crystallisation of the gypsum material.... Read More | Inquire |