| Description | PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. The moisture analyzer's halogen-heated drying chamber is suitable for the testing and analysis of samples of materials such as wood, pellets, biomass, granules, feed, food products and pastes.
Thanks to an impressive resolution or readability of 0.01 g / 10 mg, the moisture analyzer can determine the smallest weight differences. The moisture analyzer also covers the full moisture content range, from 0 ... 100%, with a moisture content resolution or readability of 0.1%. Measurement values are displayed clearly on the large, easy-to-read LCD screen.
The moisture analyzer features an adjustable drying time (1 ... 99 minutes) and an adjustable drying temperature (+40 ... +199 °C). Up to 16 different drying profiles or programs can be stored to the memory of the moisture analyzer, ensuring a controlled, repeatable testing process for accurate results time after time. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.... Read More | The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 The Damp Meter is used in various building materials such as concrete, wood, screed, plaster, walls, and other materials and is particularly suitable for construction, renovation, or craft work where the moisture content must be reliably determined. The measuring range of the device is 0 to 100 digits, with a high resolution of 0.1 digits, so that even the smallest changes in moisture can be detected. The Damp Meter works non-destructively and measures the moisture content at a depth of 20 to 40 mm / 0.8 to 1.6 in without damaging the surface of the material. The measurement results are displayed both numerically and analogously on an easy-to-read 2.4-inch LCD display, the backlighting of which can be switched off if required. For easy evaluation of the moisture content, the Damp Meter has DRY, RISK, and WET modes, whose limit values can be set individually. It also offers practical measurement functions such as HOLD for holding values and MAX/MIN for recording maximum and minimum values. The integrated capacitive sensor ensures precise measurements, while the automatic switch-off after 30 minutes conserves the lithium battery. Charging is convenient via USB-C.
Thanks to its compact design and low weight, the Damp Meter is ideal for mobile use on construction sites, for construction supervision, or for assessing water damage. Craftsmen, site managers, or renovation specialists can use the device to quickly and reliably determine the moisture content in wood, concrete, screed, plaster, and other building materials. The Damp Meter thus offers a professional solution for anyone who needs precise, non-destructive moisture measurements.... Read More | Moisture Analyser / Moisture Analyzer for light and bulky materials / weighing range 400 g / adjustable heating temperature / 4-inch LC display / 4-digit device ID / large drying pan / software (optional)
Our Moisture Analyser / Moisture Analyzer has been specially developed for light and bulky Moisture Analyser / Moisture Analyzer for light and bulky materials / weighing range 400 g / adjustable heating temperature / 4-inch LC display / 4-digit device ID / large drying pan / software (optional)
Our Moisture Analyser / Moisture Analyzer has been specially developed for light and bulky materials. It has an exceptionally large drying pan and is suitable for applications in the fields of raw material extraction, production, processing, research and recycling.
With a maximum weighing capacity of 400 g, a volume of 360 cm³ and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise and reliable moisture measurements. The balance works according to the principle of drying with simultaneous weighing: the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 2 x 250 W and an adjustable heating temperature of 40 °C to 220 °C, the Moisture Analyser / Moisture Analyzer offers quick and flexible drying of samples. The device provides various parameters for analysis, including % moisture, % dry matter, % moisture bd as well as g residual weight/kg and residual weight.
The practical functions include an automatic power-off function that stops the drying process when the constant weight is reached. This can be flexibly set to three criteria: sampling start, sampling interval and weight loss per sampling interval. A timer with an adjustable duration of 1 to 180 minutes is also available. A menu lock protects the parameters against unintentional adjustment; the menu can be locked by PIN whereas the CAL menu item remains accessible. The balance offers up to 9 programme memory locations for easy handling of drying profiles. Data is output via an RS-232 interface or a USB connection. Optional software is available for transferring data to a PC. GLP-compliant documentation is carried out using the Data Bridge software as the balance does not have an integrated printer. However, an external printer can be purchased separately to output the measurement data directly. A 4-digit device ID also enables the unique allocation of the measurement data.
The Moisture Analyser / Moisture Analyzer is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.... Read More | Moisture Analyser / Moisture Analyzer for light and bulky materials / weighing range 400 g / adjustable heating temperature / 4-inch LC display / 4-digit device ID / large drying pan / software (optional)
Our Moisture Analyser / Moisture Analyzer has been specially developed for light and bulky Moisture Analyser / Moisture Analyzer for light and bulky materials / weighing range 400 g / adjustable heating temperature / 4-inch LC display / 4-digit device ID / large drying pan / software (optional)
Our Moisture Analyser / Moisture Analyzer has been specially developed for light and bulky materials. It has an exceptionally large drying pan and is suitable for applications in the fields of raw material extraction, production, processing, research and recycling.
With a maximum weighing capacity of 400 g, a volume of 360 cm³ and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise and reliable moisture measurements. The balance works according to the principle of drying with simultaneous weighing: the weight loss is continuously recorded and displayed as a percentage of the total mass. With a heater output of 2 x 400 W and an adjustable heating temperature of 105 °C to 360 °C, the Moisture Analyser / Moisture Analyzer offers quick and flexible drying of samples. The device provides various parameters for analysis, including % moisture, % dry matter, % moisture bd as well as g residual weight/kg and residual weight.
The practical functions include an automatic power-off function that stops the drying process when a constant weight is reached. This can be flexibly set to three criteria: sampling start, sampling interval and weight loss per sampling interval. A timer with an adjustable duration of 1 to 180 minutes is also available. A menu lock protects the parameters against unintentional adjustment; the menu can be locked by a PIN whereas the CAL menu item remains accessible. The balance offers up to 9 programme memory locations for easy handling of drying profiles.
Data is output via an RS-232 interface or a USB connection. An optional software is available for transferring data to a PC. GLP-compliant documentation is carried out via the Data Bridge as the balance does not have an integrated printer. However, an external printer can be purchased separately to output the measurement data directly. A 4-digit device ID also enables the unique allocation of the measurement data. The Moisture Analyser / Moisture Analyzer is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.... Read More | Moisture Balances especially for plaster and gypsum analysis / weighing range 220 g / infrared and quartz heater / adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Balances is a high-precision device that has been specially developed for Moisture Balances especially for plaster and gypsum analysis / weighing range 220 g / infrared and quartz heater / adjustable heating temperature / 4-inch LC display / 4-digit device ID / software (optional)
Our Moisture Balances is a high-precision device that has been specially developed for plaster / gysum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The balance works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
The Moisture Balances has two adjustable heating temperature ranges: 40 °C ... 180 °C and 105 °C ... 360 °C - which are made possible by two powerful radiant heaters: a 250 W infrared heater and a 375 W quartz heater. These heating elements ensure precise and efficient drying results and can be operated independently of each other in timer or automatic mode. For measurement evaluation, the device offers various parameters such as % moisture, % dry matter, % moisture bd as well as g residual weight / kg and residual weight, which enable the sample to be analysed.
The functions include an automatic power-off function which stops the drying process when a constant weight is reached. The automatic power-off can be set to three criteria: start of sampling, sampling interval and weight loss per sampling interval. This allows a high degree of flexibility in controlling the drying process. There is also a timer that can be set from 1 to 180 minutes. Our device is also equipped with a menu lock that prevents accidental adjustment of the parameters. The menu can be locked using a PIN whereas the CAL menu item remains available. The balance has a programme memory with up to 9 memory locations to store and quickly call up different drying profiles. However, this function is only available in combination with the overhead luminous radiant heater.
Data can be transferred to a PC via software which must be purchased separately. All data can also be output via the serial RS-232 interface and USB. The Moisture Balances guarantees GLP-compliant documentation. The data is output via the Data Bridge software as the balance does not have a built-in printer. The balance also has a 4-digit device ID for unique identification of the device, which enables precise allocation of the measurement data.
Our Moisture Balances is ideal for the analysis of gypsum in various areas, such as mining, flue gas desulphurisation in coal-fired power plants and recycling. It enables the analysis of free moisture, chemically bound water as well as the degree of purity and water of crystallisation of the gypsum material.... Read More |