Homogenizers are used to break particles into smaller constituent parts. Homogenization allows samples that would not naturally be miscible due to differences in particle size and make-up to combine with each other. For a homogenizer, “shear” refers to the phenomenon of one area of fluid traveling with a different velocity relative to surrounding fluid. High shear homogenizers break particles into smaller sizes than standard instruments and are most useful for creating emulsions and suspensions. When choosing a high-shear homogenizer, it is important to consider the speed of homogenization, sample volume, and level of automation.
| | | | | |
Company | PRO Scientific Inc. | PRO Scientific Inc. | PRO Scientific Inc. | PRO Scientific Inc. | PRO Scientific Inc. |
Item | PRO25D Digital Homogenizer | Bio-Gen PRO200 Hand-Held Homogenizer or Post-Mounted Laboratory Homogenizer | DPS-20 Mechanical / Ultrasonic Homogenizer, Dual Processing System | Multi-Prep Rapid Homogenizing System | Universal Homogenizer Packages |
Citations | | | | | |
Catalog Number | 01-25100 / 01-25200 | 01-01200 / 01-02200 | 01-01720 / 01-02720 | 01-01620 / 01-02620 | PK-12000UHS / PK-02200UHS / PK-12000UHD / PK-02200UHD |
Price | | | | | |
Description | The PRO25D homogenizer has a wide volume range with a processing capability of up to 3.5 Liters*. Its digital display & speed control provides the ability to fine-tune speeds between 0 to 30,000 RPM, allowing its speed adjustment to be precisely controlled throughout the entire speed range.
The The PRO25D homogenizer has a wide volume range with a processing capability of up to 3.5 Liters*. Its digital display & speed control provides the ability to fine-tune speeds between 0 to 30,000 RPM, allowing its speed adjustment to be precisely controlled throughout the entire speed range.
The versatile and powerful PRO25D Homogenizer is ideal for a wide range of lab applications, including but not limited to compounding, emulsions and suspensions, cell disruption, protein extractions, medical research, or pharmaceutical processing. PRO generator probe ranges in diameter from 5mm to 30mm, it can process samples from 0.05ml to 3.5L*. Requires a generator probe to use. Generator probes are sold separately.
A stand is included with the Homogenizer. PRO Homogenizing Equipment is made in the USA.
Please Note: Viscous samples will reduce max capacity. Adding a Deflector Head to your Generator Probe will facilitate movement of your sample during homogenization and help increase max volume homogenization.
*Higher volumes are dependent on viscosity.... Read More | Offering plenty of power and useful features, the Bio-Gen PRO200 homogenizer unit has a 144-watt, high-torque motor with a variable speed adjustment, allowing for homogenization in mere seconds and a maximum noise level of only 68 dB under no load. A separate ON/OFF switch conveniently allows for Offering plenty of power and useful features, the Bio-Gen PRO200 homogenizer unit has a 144-watt, high-torque motor with a variable speed adjustment, allowing for homogenization in mere seconds and a maximum noise level of only 68 dB under no load. A separate ON/OFF switch conveniently allows for the slide switch speed control to remain at your ideal homogenizing speed.
With generator probes ranging in size from 5mm to 20mm in diameter, the Bio-Gen PRO200 homogenizer unit is able to homogenize samples with volumes as small as 0.05ml or as large as 500ml*. Requires a generator probe to use. Generator probes are sold separately. PRO Homogenizing Equipment is made in the USA with a 2 2-year warranty.
The Bio-Gen PRO200 homogenizer is also available in a convenient homogenizing package, which includes everything you need to begin homogenizing.
*Higher volumes are dependent on viscosity.... Read More | The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations:
- Automated Ultrasonic Homogenizing System
- Automated Mechanical Homogenizing System
- Automated Mechanical and Ultrasonic Homogenizing System
This advanced system allows The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations:
- Automated Ultrasonic Homogenizing System
- Automated Mechanical Homogenizing System
- Automated Mechanical and Ultrasonic Homogenizing System
This advanced system allows the maximum in choice and control to best support your processing needs. The DPS-20 merges the advantages of each homogenizing method to make it the optimum timesaving and flexible homogenizing system on the market. Mechanical or ultrasonic homogenizing can be used together or independently of each other. It leads to a faster and more efficient sample breakdown with minimal or no heat introduced, and more precise particle size reduction, all within a noise-reducing enclosure. Its automation capability allows for repeat processing and consistent results, freeing up time for other work in the laboratory.
A high-performance brushless motor powers the mechanical homogenizer while the 130-watt ultrasonic processor delivers constant amplitude throughout processing.
The sound-abating enclosure has LED interior lighting and a clear polycarbonate door for a full view of the inside.
This system can be used with 1.5ml/2ml, 15ml, 16ml, 19ml, and 50ml tubes through its unique carousel rack design. Our Cooling Carousel Tube Rack provides the capability to keep sample tubes within ice, ice-water, or cold beads. Additional carousel racks can be purchased for quicker load time.
Up to 20 samples can be processed in one run, include two rinse positions, or set up for every other position to be a rinse position. Typical run time for 20 samples is under 10 minutes. Onboard computing lets the DPS-20 store up to 10 different homogenizing programs in memory, or it can be used in manual mode for individual sample processing.
Onboard computing lets DPS-20 store up to 10 different homogenizing programs in memory, or it can be used in manual mode for individual sample processing.
Please Note: Customization of the DPS-20 System and/or DPS-20 Accessories are available for your specific needs.
Requires Probe(s) and Cooling Carousel Tube Rack. These items are sold separately. PRO Homogenizing Equipment is made in the USA. Includes a 2 Year Limited Warranty coverage on the majority of components.... Read More | Time Saver - - Free up your valuable lab time by homogenizing with the Multi-Prep Rapid Homogenizer and significantly increase your laboratory productivity
- Produce more consistent homogenizing results compared to traditional non-automated and standard manual homogenizing methods
- Multi-Prep’s
Time Saver - - Free up your valuable lab time by homogenizing with the Multi-Prep Rapid Homogenizer and significantly increase your laboratory productivity
- Produce more consistent homogenizing results compared to traditional non-automated and standard manual homogenizing methods
- Multi-Prep’s programmability function can store up to 10 different homogenizing programs in memory
- Can be used in the manual mode for individual sample processing
Simple Automation - - Allows for up to 6 samples to be homogenized at one time in mere seconds; homogenize up to 300 samples per hour
- Stress-free self-engagement and disengagement of the Multi-Prep Probes makes this a true walk-away homogenizing system
- Oscillating Spider Tube Rack mimics the up-down motion of hand-held homogenizing and can perform 60 oscillations per minute
Advantages - - Utilizes a multi-pack of 7mm or 10mm Multi-Prep Probe; this eliminates cross-contamination as well as the need to stop and clean a generator between samples
- PRO’s Multi-Pack Probes are made from 316 Stainless Steel and PTFE, and are reusable
- Multi-Prep Probes can be sterilized by any cleaning method, including flaming, autoclaving and chemical cleaning
- Better alternative than disposable plastic generator probes
Benefits - - No need to alter or change the tube you are currently using in your research - whether processing in small 10ml tubes or larger 15/50ml centrifuge tubes, tubes can be easily loaded into the appropriate small or large tube Spider Tube Rack
- All processing is contained in a sound-abating enclosure with a rounded clear polycarbonate door for a full view inside
- Ergonomically arranged LCD and control panel allows for full viewing of programming parameters
Requires 12-Pack of Multi-Prep Probes and Spider Tube Rack.... Read More | Features - Address your Micro and Max needs with this package
- Ideal for processing in 1.5 ml - 15ml round bottom or conical tubes
Standard Package - Bio-Gen Pro 200 Homogenizer
- 7 x 75mm saw tooth bottom Pro Quick Connect generator
- 10 x 115mm saw tooth bottom Pro Quick Connect generator
Features - Address your Micro and Max needs with this package
- Ideal for processing in 1.5 ml - 15ml round bottom or conical tubes
Standard Package - Bio-Gen Pro 200 Homogenizer
- 7 x 75mm saw tooth bottom Pro Quick Connect generator
- 10 x 115mm saw tooth bottom Pro Quick Connect generator
Deluxe Package - Bio-Gen Pro 200 Homogenizer
- 7 x 75mm saw tooth bottom Pro Quick Connect generator
- 10 x 115mm saw tooth bottom Pro Quick Connect generator
- Bio-Gen PRO200 stand Assembly
... Read More |
Motor | 576 W | 144 W, High-Torque Motor (with a variable speed adjustment) | 1200 W | 805 W | 144 W |
Speed Range | Up to 30,000 rpm | 5000 to 35,000 rpm | 2000 to 16,000 rpm | 2000 to 18,000 rpm | 5000 to 35,000 rpm |
Capacity | 0.05 mL to 3.5 L | 0.05 mL to 1 L | up to 20 samples: 1.5, 2, 15, 16, 19, and 50 mL | Up to 6 samples: 15, 50 mL | 1.5 to 15 ml |
Get Quote | | | | | |