CO2 Range | 0.1 to 20% (0.0 set point idles system) | 0.1 to 20% (0.0 Set Point Idles System) | 0.1 to 20% (0.0 Set Point Idles System) | 0.1 to 20% (0.0 Set Point Idles System) | 0.1 to 20% (0.0 Set Point Idles System) |
Description | NuAire’s In-VitroCell ES (Energy Saver) NU-5810 Direct Heat (Air Jacketed) Microbiological CO2 Incubator features a 145°C dry sterilization cycle and 95°C humidified decontamination cycle as an added defensive against incubator contamination providing an optimal controlled environment for cell NuAire’s In-VitroCell ES (Energy Saver) NU-5810 Direct Heat (Air Jacketed) Microbiological CO2 Incubator features a 145°C dry sterilization cycle and 95°C humidified decontamination cycle as an added defensive against incubator contamination providing an optimal controlled environment for cell growth. In-VitroCell ES CO2 Incubators provide a stable in-vivo growth model with heating elements located on all 6 sides of the chamber. High density R5 insulation stabilizes the interior chamber temperature requiring less energy to maintain. Unique features such as dual sterilization cycle, humidity and hypoxia control ensure your research needs are met.The basic functionality to promote tissue cell growth by controlling Temperature and CO2 gas levels in the growth chamber. A relative humidity of 90% is produce through convention by a water pan. The Closed Loop HEPA Filtration System creates ISO Class 5 Clean-room like conditions to minimize potential contamination entering the growth chamber.
Features - NuTouch Intelligent Interface
- Constant Contamination Control (C3)
- Closed Loop HEPA Filtration
- ISO Class 5 Cleanroom Conditions
- Single Beam, Dual Wave Infrared (IR) Sensor
- Temperature Uniformity
- Incubator Humidity
- Advanced Construction
- Minimal Vibration Promotes Cell Growth
- Smaller Footprint with More Useable Space
- CuVerro® Antimicrobial Copper Surfaces
... Read More | The NuAire NU-5741 is a Direct Heat CO2 Incubator featuring precise Humidity control through the use of a water reservoir and sensor as well as Oxygen control for hypoxia research by injecting Nitrogen gas to meet set point to suppress Oxygen levels. | The NuAire NU-5841 In-VitroCell ES (Energy Saver) Direct Heat Hypoxic CO2 Incubator is designed to provide a reliable, controlled in-vitro environment suitable for growing tissue cell cultures as well as storing and preserving embryos, gametes and animal tissue cell cultures. This unit features a The NuAire NU-5841 In-VitroCell ES (Energy Saver) Direct Heat Hypoxic CO2 Incubator is designed to provide a reliable, controlled in-vitro environment suitable for growing tissue cell cultures as well as storing and preserving embryos, gametes and animal tissue cell cultures. This unit features a dual sterilizing system with a 95°C humidified decontamination cycle and a 145°C dry sterilizing cycle, a microprocessor-based dual wave infrared (IR) sensor for controlling the CO2 levels, a relative humidity (RH) control for those cells that prone to desiccation and a Zirconia ceramic O2 fuel cell sensor to keep oxygen levels between 0.5% and 21%. We offer a number of optional features including CuVerro® antimicrobial copper surfacing for killing bacteria within the chamber.
Features - NuTouch Electronic Control System
- 100% Stainless Steel Coved Interior Chamber
- Dual Temperature Sensor Probes
- Infrared (IR) CO2 Sensor
- Dual Sterilziation Cycles (NU-5810, 5820, 5830, 5840)
- Humidity Control System (NU-5820, 5840)
- O2 Control System (NU-5830, 5840)
- Four (4) Stainless Steel Shelves
- Eight (8) Stainless Steel Shelf Guides
- Four (4) Wall Brackets
- Field Reversible Outter Door
- Remote Alarm Output Contacts
- 4 to 20 mA Analog Output RS-485 Communication USB Port
- CO2 Sample Port
- Adjustable Leg Levelers
- Access Port and Plug with Breather Holes
- One (1) Water Pan
- One (1) 6.5 ft. / 2 m Electrical Cord
... Read More | NuAire Direct Heat (Air Jacketed) CO2 Incubators provide a stable in-vivo growth model with heating elements located on all 6 sides of the chamber. High density R5 insulation stabilizes the interior chamber temperature requiring less energy to maintain.
Unique features such as dual sterilization NuAire Direct Heat (Air Jacketed) CO2 Incubators provide a stable in-vivo growth model with heating elements located on all 6 sides of the chamber. High density R5 insulation stabilizes the interior chamber temperature requiring less energy to maintain.
Unique features such as dual sterilization cycle, humidity and hypoxia control ensure your research needs are met.... Read More | The NuAire NU-5831 In-VitroCell ES (Energy Saver) Direct Heat Hypoxic CO2 Incubator is designed to provide a reliable, controlled in-vitro environment suitable for growing tissue cell cultures as well as storing and preserving embryos, gametes and animal tissue cell cultures. This unit features a The NuAire NU-5831 In-VitroCell ES (Energy Saver) Direct Heat Hypoxic CO2 Incubator is designed to provide a reliable, controlled in-vitro environment suitable for growing tissue cell cultures as well as storing and preserving embryos, gametes and animal tissue cell cultures. This unit features a dual sterilizing system with a 95°C humidified decontamination cycle and a 145°C dry sterilizing cycle, a microprocessor-based dual wave infrared (IR) sensor for controlling the CO2 levels and a Zirconia ceramic O2 fuel cell sensor to keep oxygen levels between 0.5% and 21%. We offer a number of optional features including CuVerro® antimicrobial copper surfacing for killing bacteria within the chamber.
Features - NuTouch Electronic Control System
- 100% Stainless Steel Coved Interior Chamber
- Dual Temperature Sensor Probes
- Infrared (IR) CO2 Sensor
- Dual Sterilziation Cycles (NU-5810, 5820, 5830, 5840)
- Humidity Control System (NU-5820, 5840)
- O2 Control System (NU-5830, 5840)
- Four (4) Stainless Steel Shelves
- Eight (8) Stainless Steel Shelf Guides
- Four (4) Wall Brackets
- Field Reversible Outter Door
- Remote Alarm Output Contacts
- 4 to 20 mA Analog Output RS-485 Communication USB Port
- CO2 Sample Port
- Adjustable Leg Levelers
- Access Port and Plug with Breather Holes
- One (1) Water Pan
- One (1) 6.5 ft. / 2 m Electrical Cord
... Read More |