| Description | AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems are designed for fully-automatic operation, and are compatible with most Type I and Type II Reagent Grade DI laboratory water purification Systems. AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems are designed for fully-automatic operation, and are compatible with most Type I and Type II Reagent Grade DI laboratory water purification Systems. AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which eliminates the need for level controls, overflow piping, and transfer pumps.
Features
- RO Production: 1, 2 or 3-Gallon Per Minute
- Feed Water Quality/TDS: <1,000 PPM
- Storage Capacity: 42-Liter
- Carbon Pre-Filter: Not Included
- TDS Monitor: Built-In
- Electrical Requirements: 100-240 VAC
... Read More | AQUA SOLUTIONS' Biological Grade Type I DI Systems are available in Standard (2 Liters/Min) and High Flow/Capacity (4-10 Liters/Min) versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that meets or AQUA SOLUTIONS' Biological Grade Type I DI Systems are available in Standard (2 Liters/Min) and High Flow/Capacity (4-10 Liters/Min) versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Biological Grade systems include a built-in ultrafilter to reduce pyrogen, endotoxin, RNase and DNase levels.
Features
- Built-in 5,000 MWCO ultrafilter module
- Continuous recirculation ensures superior water quality at all times
- Highest flow rate (2 Liters per Minute) of any comparably sized system
- Highest ion exchange capacity (2,000 to 4,000 grains) of any comparable system
- Built-in activated carbon prefilter reduces particulates & organics for longer DI module life
- Digital, temp-compensated resistivity monitor with red/green LED alarm set point
- Teflon recirculating remote dispenser with 0.22 µm final filter capsule
- System can be bench, shelf or wall-mounted at no extra charge
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' High Flow Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that AQUA SOLUTIONS' High Flow Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Biological Grade systems include a built-in ultrafilter to reduce pyrogen, endotoxin, RNase and DNase levels.
Features
- Made in the USA
- Ultrafilter - Removes Pyrogen, Endotoxin, RNase, & DNase
- UV Sterilizer prevents the growth of microorganisms within the system (Model 2035BU / Model 2036BU)
- 6000 or 12,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Ultra-Low TOC Biological Grade Type I DI Systems include a built-in dual-wavelength ultraviolet (UV) oxidizer/sterilizer to reduce TOC the lowest possible levels, and a built-in ultrafilter (UF) to reduce pyrogen, endotoxin, RNase and DNase. This combination of UV-UF also results in water that has no RNase or DNase activity.
Features
- Made in the USA
- Ultrafilter - Removes Pyrogen, Endotoxin, RNase, & DNase
- Dual wavelength - Reduces TOC levels to <5 ppb="" and="" prevents="" the="" growth="" of="" microorganisms="" within="" the="" system="">
- 6,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The System price includes two purification modules: one installed and one spare.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Made in the USA.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More |