| Description | Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional flywheel mass) allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components. Analytical fineness is often achieved in one working run.
The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Another innovation is the wide, freely selectable speed range from 700 to 3,000 min-1. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
Features - Powerful size reduction thanks to 3 kW drive with high torque and RES technology
- Perfect adaptation to application requirements by variable speed from 700 to 3,000 min-1
- Optimum cutting effects thanks to double acting cutting bars
- Quick and easy cleaning due to fold-back hopper, smooth surfaces and push-fit rotor
- Defined final fineness due to bottom sieves with aperture sizes from 0.25 - 20 mm
- Wide range of accessories including various hoppers, collection systems, rotors and sieves
- Highest safety standards due to engine brake, central locking device, electronic safety check and base frame
... Read More | The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for mechanosynthesis applications with RAMAN readyness and a grinding time up to 8 h. It is also the most suitable instrument for biological applications such as cell disruption for nucleic acids or protein extraction. It is the first mixer mill wil calibrated frequency and time for most reproducible results- powerful grinding by impact and friction with up to 30 Hz
- pulverization of two samples down to 5 micron
- adapter for keeping 1.5, 2 or 5 ml plastic tubes or 2 ml steel tubes available
- adapter for keeping 4 x 50 ml conical tubes or 30 ml wide-mouth bottles available
- adapter for keeping 4 x 5 ml steel tubes available
- suitable for long-term grinding processes up to 8 h
- suitable for mechanochemistry applications
- 3 different grinding modes (dry, wet or cryogenic)
- memory for 8 SOPs and 4 program cycles
- Screw-Top jars from 5-50 ml
10 ml PMMA jars for RAMAN applications
... Read More | The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances.
Its high speed in comparison to the SR 200 allows a significantly higher throughput and fineness.
The SR 300 isThe Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances.
Its high speed in comparison to the SR 200 allows a significantly higher throughput and fineness.
The SR 300 is intended for universal use: from sample preparation in laboratories up to preparing sample batches in pilot plants or production facilities. The grinding chamber, the feed hopper and the material inlet are completely made from high quality stainless steel.
Features
- Suitable for batchwise operation of larger quantities
- Central locking device
- Wide range of accessories including various collection and feeding systems, rotors and sieves
- High final fineness
- Exchangeable grinding and sieve inserts
- Grinding chamber, feed hopper and material inlet and outlet of stainless steel
- Optional grinding inserts 180° for grinding of hard-brittle materials by additional impact
- Optional distance rotor to reduce frictional heat
- Removable hopper for easy cleaning
- Motor brake
- Defined final fineness due to bottom sieves with aperture sizes from 0.08 - 10 mm
... Read More | The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D. Because of its unique grinding motion, the XRD-Mill McCrone The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D. Because of its unique grinding motion, the XRD-Mill McCrone is particularly effective for this analytical method: The 48 cylindrical grinding elements grind the samples gently via friction. The result is a short grinding time with almost no sample loss and an exceptionally narrow particle size distribution. The crystal lattice is almost entirely preserved during grinding operation, a pre-requisite for meaningful X-ray diffraction results.
Features: - Crystal lattice preserved during grinding operation
- Very narrow and reproducible particle size distribution
- Minimal cross contamination
- Compact, bench-top sized model
- Suitable for dry and wet grinding
... Read More |
| Sample Type | Soft, Medium-Hard, Tough, Elastic or Fibrous | Hard, Medium-Hard, Soft, Brittle, Elastic or Fibrous | Soft or Medium-Hard | Medium-hard, Hard, Brittle, Fibrous |
| Applications | Size Reduction by Cutting: Agriculture, Biology, Chemistry / Plastics, Engineering / Electronics, Environment / Recycling, Food, Medicine / Pharmaceuticals | mechanochemistry, mechanical alloying, size reduction, mixing, homogenization, cryogenic grinding; agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals, cell disruption | Size Reduction and Deagglomeration: Agriculture, Chemistry / Plastics, Construction Materials, Environment / Recycling, Food, Medicine / Pharmaceuticals | Grinding, Mixing and Triturating, Dry and Wet |