|  |  |  |  |
| Company | RETSCH | RETSCH | RETSCH | RETSCH |
| Item | Cutting Mill SM 300 | Cyclone Mill TWISTER | Knife Mill GRINDOMIX GM 300 | Mixer Mill MM 400 |
| Citations | | | | |
| Catalog Number | SM 300 | Twister | GM 300 | MM 400 |
| Price | | | | |
| Description | Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional flywheel mass) allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components. Analytical fineness is often achieved in one working run.
The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Another innovation is the wide, freely selectable speed range from 700 to 3,000 min-1. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
Features - Powerful size reduction thanks to 3 kW drive with high torque and RES technology
- Perfect adaptation to application requirements by variable speed from 700 to 3,000 min-1
- Optimum cutting effects thanks to double acting cutting bars
- Quick and easy cleaning due to fold-back hopper, smooth surfaces and push-fit rotor
- Defined final fineness due to bottom sieves with aperture sizes from 0.25 - 20 mm
- Wide range of accessories including various hoppers, collection systems, rotors and sieves
- Highest safety standards due to engine brake, central locking device, electronic safety check and base frame
... Read More | The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content.
The provided sieves guarantee an optimum particle size distribution so that it is not necessary to recalibrate the NIR spectrometer. The rotor speed can be adjusted in 3 steps allowing for perfect adaptation to the sample requirements. Cleaning the mill is quick and easy as the air jet effects a complete discharge of the material from the grinding chamber.
This new cyclone mill in proven RETSCH quality optimizes the reproducible sample preparation to NIR analysis thus allowing for meaningful and reliable analysis results.
Features - Ideal for grinding feeds, grains, forage and other similar products
- 3 controlled speeds
- Cyclone separator with 250 ml collecting bottle for quick extraction of sample
- No cross contamination thanks to easy cleaning
- Convenient operating panel
- Professional industrial design with long lifetime
... Read More | The new knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.
With four sharp, robust blades and a powerful motor which can reach temporary peaks of 3 kW, it is ideal for The new knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.
With four sharp, robust blades and a powerful motor which can reach temporary peaks of 3 kW, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. The GRINDOMIX GM 300 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
Features - Efficient size reduction of up to 4,500 ml feed quantity due to a powerful 1.1 kW motor (peak power input >3 kW)
- Pre- and fine-grinding in one mill: cutting action in regular mode, grinding by impact in reverse mode, pre-grinding in interval mode
- All parts which come into contact with the sample material are autoclavable
- Perfect adaptation to application requirements by variable speed from 500 to 4,000 min-1 with an increment of 100 min-1
- Optional gravitation lid for automatic reduction of the grinding chamber volume
- 10 SOPs can be stored
- Grinding jar in plastic and stainless steel available
... Read More | The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for mechanosynthesis applications with RAMAN readyness and a grinding time up to 8 h. It is also the most suitable instrument for biological applications such as cell disruption for nucleic acids or protein extraction. It is the first mixer mill wil calibrated frequency and time for most reproducible results- powerful grinding by impact and friction with up to 30 Hz
- pulverization of two samples down to 5 micron
- adapter for keeping 1.5, 2 or 5 ml plastic tubes or 2 ml steel tubes available
- adapter for keeping 4 x 50 ml conical tubes or 30 ml wide-mouth bottles available
- adapter for keeping 4 x 5 ml steel tubes available
- suitable for long-term grinding processes up to 8 h
- suitable for mechanochemistry applications
- 3 different grinding modes (dry, wet or cryogenic)
- memory for 8 SOPs and 4 program cycles
- Screw-Top jars from 5-50 ml
10 ml PMMA jars for RAMAN applications
... Read More |
| Principle | Shearing and Cutting | Impact and Friction | Cutting | Impact and Friction |
| Sample Size | Up to 60 x 80 mm | <10 mm | ~ 130 mm | ≤8 mm |
| Sample Type | Soft, Medium-Hard, Tough, Elastic or Fibrous | Fibrous or Soft | Soft, Medium-Hard, Elastic, Containing Water/Fat/Oil, Dry or Fibrous | Hard, Medium-Hard, Soft, Brittle, Elastic or Fibrous |
| Applications | Size Reduction by Cutting: Agriculture, Biology, Chemistry / Plastics, Engineering / Electronics, Environment / Recycling, Food, Medicine / Pharmaceuticals | Grinding Prior to NIR Analysis: Agriculture, Foods / Feeds, Medicine / Pharmaceuticals | Size Reduction, Homogenization and Mixing: Agriculture, Biology, Food, Medicine / Pharmaceuticals | mechanochemistry, mechanical alloying, size reduction, mixing, homogenization, cryogenic grinding; agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals, cell disruption |
| Speed | 700 to 3000 min-1 | 10,000 to 14,000 min-1 | 500 to 4000 min-1 | 3 to 30 Hz |
| Rotor Type | Parallel Section Rotor and 6-Disc Rotor | TWISTER rotor | Stainless steel knife, knife with titanium-niob coating | grinding jar and balls |
| Final Fineness | 0.25 to 20 mm | < 500 um | < 300 um | ~5 µm |
| Get Quote | | | | |