|  |  |  |  |
| Company | RETSCH | RETSCH | RETSCH | RETSCH |
| Item | Vibratory Disc Mill RS 200 | Cutting Mill SM 300 | Knife Mill Grindomix GM 200 | Mixer Mill MM 400 |
| Citations | | | | |
| Catalog Number | RS 200 | SM 300 | GM 200 | MM 400 |
| Price | | | | |
| Description | The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. The instrument runs steadily and smoothly, even with heavy grinding sets, at maximum speed thanks to the new Stabilized-Plane-The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. The instrument runs steadily and smoothly, even with heavy grinding sets, at maximum speed thanks to the new Stabilized-Plane-Drive.
With its robust design, the RS 200 has proven to be ideal for use in the building materials sector (cement), in geology, mineralogy, metallurgy and in power plants. Due to the high end fineness and speed the RS 200 is the perfect mill when it comes to preparing samples for spectral analysis.
Features - Reproducible results due to "Stabilized-Plane-Drive" (avoid tumbling of the grinding set)
- Safety interlock
- Variable speed 700 - 1,500 min-1
- Extremely short grinding time
- Agate recognition for automatic speed reduction
- 10 SOPs can be stored
- No sample loss thanks to optimum o-ring seal
- Wide range of materials for contamination free grinding
- Noise-insulated grinding chamber
- Quick-action grinding set clamping device
... Read More | Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The new Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail.
The high torque of the new 3 kW drive with RES technology (additional flywheel mass) allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components. Analytical fineness is often achieved in one working run.
The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials. Another innovation is the wide, freely selectable speed range from 700 to 3,000 min-1. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.
Features - Powerful size reduction thanks to 3 kW drive with high torque and RES technology
- Perfect adaptation to application requirements by variable speed from 700 to 3,000 min-1
- Optimum cutting effects thanks to double acting cutting bars
- Quick and easy cleaning due to fold-back hopper, smooth surfaces and push-fit rotor
- Defined final fineness due to bottom sieves with aperture sizes from 0.25 - 20 mm
- Wide range of accessories including various hoppers, collection systems, rotors and sieves
- Highest safety standards due to engine brake, central locking device, electronic safety check and base frame
... Read More | The new knife mill GRINDOMIX GM 200 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 1 liters quickly and reproducibly.
With two sharp, robust blades and a powerful motor which can reach temporary peaks of 1 kW, it is ideal for The new knife mill GRINDOMIX GM 200 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 1 liters quickly and reproducibly.
With two sharp, robust blades and a powerful motor which can reach temporary peaks of 1 kW, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. The GRINDOMIX GM 200 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
Features - Efficient size reduction of up to 700 ml feed quantity due to a powerful 1 kW motor
- Pre- and fine-grinding in one mill: cutting action in regular mode, grinding by impact in reverse mode, pre-grinding in interval mode
- All parts which come into contact with the sample material are autoclavable
- Perfect adaptation to application requirements by variable speed from 2,000 to 10,000 min-1
- CryoKit available for grinding embrittled or deeply frozen samples
- Optional gravitaty lid for automatic reduction of the grinding chamber volume
- Optional volume reduction lid available
- 8 SOPs and 4 sequences can be stored
- Grinding jar in plastic and stainless steel available
... Read More | The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for mechanosynthesis applications with RAMAN readyness and a grinding time up to 8 h. It is also the most suitable instrument for biological applications such as cell disruption for nucleic acids or protein extraction. It is the first mixer mill wil calibrated frequency and time for most reproducible results- powerful grinding by impact and friction with up to 30 Hz
- pulverization of two samples down to 5 micron
- adapter for keeping 1.5, 2 or 5 ml plastic tubes or 2 ml steel tubes available
- adapter for keeping 4 x 50 ml conical tubes or 30 ml wide-mouth bottles available
- adapter for keeping 4 x 5 ml steel tubes available
- suitable for long-term grinding processes up to 8 h
- suitable for mechanochemistry applications
- 3 different grinding modes (dry, wet or cryogenic)
- memory for 8 SOPs and 4 program cycles
- Screw-Top jars from 5-50 ml
10 ml PMMA jars for RAMAN applications
... Read More |
| Principle | Pressure and Friction | Shearing and Cutting | Cutting | Impact and Friction |
| Sample Size | <15 mm | Up to 60 x 80 mm | ~ 40 mm | ≤8 mm |
| Sample Type | Medium-Hard, Hard, Brittle or Fibrous | Soft, Medium-Hard, Tough, Elastic or Fibrous | Soft, Medium-Hard, Elastic, Containing Water/Fat/Oil, Dry or Fibrous | Hard, Medium-Hard, Soft, Brittle, Elastic or Fibrous |
| Applications | Size Reduction, Mixing and Triturating: Construction Materials, Environment / Recycling, Geology / Metallurgy, Glass / Ceramics | Size Reduction by Cutting: Agriculture, Biology, Chemistry / Plastics, Engineering / Electronics, Environment / Recycling, Food, Medicine / Pharmaceuticals | Size Reduction, Homogenization and Mixing: Agriculture, Biology, Food, Medicine / Pharmaceuticals | mechanochemistry, mechanical alloying, size reduction, mixing, homogenization, cryogenic grinding; agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals, cell disruption |
| Speed | 700 to 1500 min-1 | 700 to 3000 min-1 | 2,000 to 10,000 min-1 | 3 to 30 Hz |
| Rotor Type | grinding dish with disc (and ring) | Parallel Section Rotor and 6-Disc Rotor | Stainless steel knife, knife titanium; CryoKit | grinding jar and balls |
| Final Fineness | < 40 um | 0.25 to 20 mm | < 300 um | ~5 µm |
| Get Quote | | | | |