|  |  |  |  |
| Company | RETSCH | RETSCH | RETSCH | RETSCH |
| Item | Vibratory Disc Mill RS 200 | Knife Mill GRINDOMIX GM 300 | Mixer Mill MM 400 | Mixer Mill MM 500 control |
| Citations | | | | |
| Catalog Number | RS 200 | GM 300 | MM 400 | MM 500 control |
| Price | | | | |
| Description | The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. The instrument runs steadily and smoothly, even with heavy grinding sets, at maximum speed thanks to the new Stabilized-Plane-The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. The instrument runs steadily and smoothly, even with heavy grinding sets, at maximum speed thanks to the new Stabilized-Plane-Drive.
With its robust design, the RS 200 has proven to be ideal for use in the building materials sector (cement), in geology, mineralogy, metallurgy and in power plants. Due to the high end fineness and speed the RS 200 is the perfect mill when it comes to preparing samples for spectral analysis.
Features - Reproducible results due to "Stabilized-Plane-Drive" (avoid tumbling of the grinding set)
- Safety interlock
- Variable speed 700 - 1,500 min-1
- Extremely short grinding time
- Agate recognition for automatic speed reduction
- 10 SOPs can be stored
- No sample loss thanks to optimum o-ring seal
- Wide range of materials for contamination free grinding
- Noise-insulated grinding chamber
- Quick-action grinding set clamping device
... Read More | The new knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.
With four sharp, robust blades and a powerful motor which can reach temporary peaks of 3 kW, it is ideal for The new knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.
With four sharp, robust blades and a powerful motor which can reach temporary peaks of 3 kW, it is ideal for homogenizing substances with a high water, oil or fat content as well as for grinding dry, soft and medium-hard products. The GRINDOMIX GM 300 meets and exceeds all special laboratory and analytical requirements and is a professional device superior to any commercial household mixer.
Features - Efficient size reduction of up to 4,500 ml feed quantity due to a powerful 1.1 kW motor (peak power input >3 kW)
- Pre- and fine-grinding in one mill: cutting action in regular mode, grinding by impact in reverse mode, pre-grinding in interval mode
- All parts which come into contact with the sample material are autoclavable
- Perfect adaptation to application requirements by variable speed from 500 to 4,000 min-1 with an increment of 100 min-1
- Optional gravitation lid for automatic reduction of the grinding chamber volume
- 10 SOPs can be stored
- Grinding jar in plastic and stainless steel available
... Read More | The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for The Mixer Mill MM 400 is a true multipurpose mill designed for dry, wet and cryogenic grinding of small volumes up to 2 x 20 ml. It mixes and homogenizes powders and suspensions with a frequency of 30 Hz within seconds – unbeatably fast and easy to operate. It is also very useful for mechanosynthesis applications with RAMAN readyness and a grinding time up to 8 h. It is also the most suitable instrument for biological applications such as cell disruption for nucleic acids or protein extraction. It is the first mixer mill wil calibrated frequency and time for most reproducible results- powerful grinding by impact and friction with up to 30 Hz
- pulverization of two samples down to 5 micron
- adapter for keeping 1.5, 2 or 5 ml plastic tubes or 2 ml steel tubes available
- adapter for keeping 4 x 50 ml conical tubes or 30 ml wide-mouth bottles available
- adapter for keeping 4 x 5 ml steel tubes available
- suitable for long-term grinding processes up to 8 h
- suitable for mechanochemistry applications
- 3 different grinding modes (dry, wet or cryogenic)
- memory for 8 SOPs and 4 program cycles
- Screw-Top jars from 5-50 ml
10 ml PMMA jars for RAMAN applications
... Read More | The mixer mill MM 500 control is a unique compact, versatile bench-top unit which has been developed to work in a temerature range from -100°C to + 100°C and thus either cool samples or heat them up while grinding. It is used for dry, wet and cryogenic grinding of up to 2 x 45 ml sample material The mixer mill MM 500 control is a unique compact, versatile bench-top unit which has been developed to work in a temerature range from -100°C to + 100°C and thus either cool samples or heat them up while grinding. It is used for dry, wet and cryogenic grinding of up to 2 x 45 ml sample material within seconds. With a maximum frequency of 30 Hz, it generates enough energy to produce particles in the nanometer range. The robust high-performance drive makes the mill suitable for long-term grinding processes up to 99 hours. Hence, the MM 500 control is the first mixer mill in the market to provide a real alternative to grinding in a planetary ball mill with special cooling options and with more comfortable handling - powerful grinding by impact and friction with up to 30 Hz
- pulverization of two samples down to the nanometer range < 0.1 micron
- multi-cavity jars 2x 25 ml or 4 x 10 ml available
- adapter for keeping 2 ml plastic tubes or 2 ml steel tubes available
- suitable for long-term grinding processes up to 99 h
- suitable for mechanochemistry applications
- 3 different grinding modes (dry, wet or cryogenic)
- memory for 12 SOPs and 4 program cycles
- Screw-Lock jars, pressure-tight up to 5 bar
GrindControl to measure pressure and temperature available - grinding under inert gas (optional)
- jar design allows full use of the volume, also for wet grinding
- jars remain conveniently clamped for periodic sample extraction or visual checks
... Read More |
| Principle | Pressure and Friction | Cutting | Impact and Friction | Impact and Friction |
| Sample Size | <15 mm | ~ 130 mm | ≤8 mm | ≤10 mm |
| Sample Type | Medium-Hard, Hard, Brittle or Fibrous | Soft, Medium-Hard, Elastic, Containing Water/Fat/Oil, Dry or Fibrous | Hard, Medium-Hard, Soft, Brittle, Elastic or Fibrous | Hard, Medium-Hard, Soft, Brittle, Elastic or Fibrous |
| Applications | Size Reduction, Mixing and Triturating: Construction Materials, Environment / Recycling, Geology / Metallurgy, Glass / Ceramics | Size Reduction, Homogenization and Mixing: Agriculture, Biology, Food, Medicine / Pharmaceuticals | mechanochemistry, mechanical alloying, size reduction, mixing, homogenization, cryogenic grinding; agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals, cell disruption | mechanochemistry, mechanical alloying, size reduction, mixing, homogenization, cryogenic grinding; agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals |
| Speed | 700 to 1500 min-1 | 500 to 4000 min-1 | 3 to 30 Hz | 3 to 30 Hz |
| Rotor Type | grinding dish with disc (and ring) | Stainless steel knife, knife with titanium-niob coating | grinding jar and balls | grinding jar and balls |
| Final Fineness | < 40 um | < 300 um | ~5 µm | ~0.1 µm |
| Get Quote | | | | |