Lab consumables include a range of supplies used in the laboratory and laboratory testing. Consumables used in the laboratory are those items that must be replaced regularly when they are used or wear down. The types of labware include glassware, plasticware and general lab supplies while the types of consumables include but not limited to tubes, strips, filters, kits, reagents, caps, tips, gloves, and more.
Find, compare, and request a quote for lab consumables across leading suppliers at Labcompare; including access to product citations, related published figures, and first-hand reviews from our scientific community.
|  |  |  |  |  |
| Company | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences |
| Item | Polypropylene Reservoirs | Automation Friendly Reservoirs | GRIPTIPS for Handheld Pipettes | Low Retention GRIPTIPS for Handheld Pipettes | Wide bore GRIPTIPS for Handheld Pipettes |
| Citations | | | | | |
| Catalog Number | 6351 / 6352 / 6361 / 6362 / 6371 / 6372 | 6303 / 6317 / 6318 / 6308 / 6337 / 6338. 6307 / 6327 / 6328 / 6309 / 6347 / 6348 | 4401 / 4402 / 4403 / 4404 / 4405 / 4406 / 4411 / 4412 / 4413 / 4414 / 4415 / 4416 / 4421 / 4422 / 4423 / 4424 / 4425 / 4426 / 4431 / 4432 / 4433 / 4434 / 4435 / 4436 / 4441 / 4442 / 4443 / 4444 / 4445 / 4446 / 4451 / 4456 | 6503 / 6504 / 6505 / 6553 / 6554 / 6555 / 6563 / 6564 / 6565 / 6533 / 6534 / 6535 / 6543 / 6544 / 6545 | 6633 / 6634 / 6635 / 6643 / 6644 / 6645 |
| Price | Supplier Page | Supplier Page | Supplier Page | Supplier Page | Supplier Page |
| Description | The 300 ml open well, 12 column and 8 row polypropylene reservoirs offer improved chemical campatibility and also permit autoclaving. | Automation friendly reagent reservoirs are made of crystal clear polystyrene and polypropylene and nest inside each other. They fit into a reusable base with general SBS-footprint and are fully compatible with all liquid handling systems. The bold, clearly visible volume markings lead to more Automation friendly reagent reservoirs are made of crystal clear polystyrene and polypropylene and nest inside each other. They fit into a reusable base with general SBS-footprint and are fully compatible with all liquid handling systems. The bold, clearly visible volume markings lead to more accurate reagent measurements, no over-pouring, and less waste. The anti-sealing pattern of the reagent’s flat bottom, which prevents pipette tips from sealing off, and a specially formulated surface treatment result in a dead volume of less than 3 ml. Latching lids with gasket prevent spillage or evaporation during short term storage.
Can be ordered individually sealed or in bulk of 4 sleeves of 25 individually sealed reservoirs.... Read More | The GRIPTIPS together with INTEGRA pipettes form an integral system. Pipette tip and pipette were designed to fit perfectly together. As a result, the loading and attachment forces of the tips could be reduced to minimize wrist related stresses. In addition, the system provides a perfect tip sealingThe GRIPTIPS together with INTEGRA pipettes form an integral system. Pipette tip and pipette were designed to fit perfectly together. As a result, the loading and attachment forces of the tips could be reduced to minimize wrist related stresses. In addition, the system provides a perfect tip sealing and reliably prevents tips from accidently falling off during pipetting. Consistent and safe pipetting guaranteed! GRIPTIPS come in bulk or stackable boxes (non-sterile, sterile and filtered) featuring colour-coded inserts that correspond to the five volume ranges of the INTEGRA pipettes. The two lowest volume GRIPTIPS come in 384-fold configuration, so the same tips and boxes can be used with 16-channel pipettes as well. The GREEN CHOICE is an environmentally friendly packaging of GRIPTIPS. Each GREEN CHOICE contains five GripTip inserts of non-sterile or pre-sterilized GRIPTIPS to refill the current tip boxes.... Read More | Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique polypropylene blend to mold Low Retention GRIPTIPS with heightened hydrophobic properties. Using Low Retention GRIPTIPS prevents low surface tension samples from spreading out and “wetting” the inner wall of the tips, allowing them to bead-up for a maximum liquid recovery. GRIPTIPS specially fit with INTEGRA pipettes and come in stackable boxes (non-sterile, sterile and filtered) featuring colour-coded inserts that correspond to the volume ranges of the INTEGRA pipettes.... Read More | Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique polypropylene blend to mold Low Retention GRIPTIPS with heightened hydrophobic properties. Using Low Retention GRIPTIPS prevents low surface tension samples from spreading out and “wetting” the inner wall of the tips, allowing them to bead-up for a maximum liquid recovery. GRIPTIPS specially fit with INTEGRA pipettes and come in stackable boxes (non-sterile, sterile and filtered) featuring colour-coded inserts that correspond to the volume ranges of the INTEGRA pipettes.... Read More |
| Type | Polypropylene Reservoirs | Inquire | Inquire | Inquire | Inquire |
| Applications | Inquire | Inquire | Inquire | For use with viscous samples, detergents and other low surface tension liquids | Inquire |
| Quantity | 25 per case | 30 individually sealed or 100 bulk; 150 ml or 300 ml | 5 boxes or 1 bag of 1000 | 5 boxes | 6 or 7 boxes of 96 tips |
| Get Quote | Supplier Page | Supplier Page | Supplier Page | Supplier Page | Supplier Page |