Lab consumables include a range of supplies used in the laboratory and laboratory testing. Consumables used in the laboratory are those items that must be replaced regularly when they are used or wear down. The types of labware include glassware, plasticware and general lab supplies while the types of consumables include but not limited to tubes, strips, filters, kits, reagents, caps, tips, gloves, and more.
Find, compare, and request a quote for lab consumables across leading suppliers at Labcompare; including access to product citations, related published figures, and first-hand reviews from our scientific community.
|  |  |  |  |  |
| Company | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences | INTEGRA Biosciences |
| Item | Divided Reagent Reservoir 25 ml | 12 Well Reagent Reservoirs | Automation Friendly Reservoirs | Low Retention GRIPTIPS for Handheld Pipettes | Wide bore GRIPTIPS for Handheld Pipettes |
| Citations | | | | | |
| Catalog Number | 4351 / 4352 / 4356 / 4357 | 4360 / 4361 / 4365 / 4366 | 6303 / 6317 / 6318 / 6308 / 6337 / 6338. 6307 / 6327 / 6328 / 6309 / 6347 / 6348 | 6503 / 6504 / 6505 / 6553 / 6554 / 6555 / 6563 / 6564 / 6565 / 6533 / 6534 / 6535 / 6543 / 6544 / 6545 | 6633 / 6634 / 6635 / 6643 / 6644 / 6645 |
| Price | Supplier Page | Supplier Page | Supplier Page | Supplier Page | Supplier Page |
| Description | 25 ml divided reservoirs are comprised of 5 and 10 ml compartments, while still nesting comfortably in the standard 25 ml reusable, sturdy reservoir base. Each reservoir features the SureFlo™ anti-sealing array and hydrophilic surface treatment providing especially low dead volumes. This is 25 ml divided reservoirs are comprised of 5 and 10 ml compartments, while still nesting comfortably in the standard 25 ml reusable, sturdy reservoir base. Each reservoir features the SureFlo™ anti-sealing array and hydrophilic surface treatment providing especially low dead volumes. This is particularly helpful when pipetting precious samples or expensive reagents with a multichannel pipette. Inserts are available in polystyrene or polypropylene for improved chemical compatibility.... Read More | The 12 Well Reagent Reservoir is comprised of 12 compartments with a capacity of 3 ml per compartment, while still nesting comfortably in the standard 25 ml reusable, sturdy base.
Features: - Lowest Dead Volume
- Compatible With 1, 8 & 12 Channel Pipettes
- Toss The Insert & Keep The Base
| Automation friendly reagent reservoirs are made of crystal clear polystyrene and polypropylene and nest inside each other. They fit into a reusable base with general SBS-footprint and are fully compatible with all liquid handling systems. The bold, clearly visible volume markings lead to more Automation friendly reagent reservoirs are made of crystal clear polystyrene and polypropylene and nest inside each other. They fit into a reusable base with general SBS-footprint and are fully compatible with all liquid handling systems. The bold, clearly visible volume markings lead to more accurate reagent measurements, no over-pouring, and less waste. The anti-sealing pattern of the reagent’s flat bottom, which prevents pipette tips from sealing off, and a specially formulated surface treatment result in a dead volume of less than 3 ml. Latching lids with gasket prevent spillage or evaporation during short term storage.
Can be ordered individually sealed or in bulk of 4 sleeves of 25 individually sealed reservoirs.... Read More | Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique polypropylene blend to mold Low Retention GRIPTIPS with heightened hydrophobic properties. Using Low Retention GRIPTIPS prevents low surface tension samples from spreading out and “wetting” the inner wall of the tips, allowing them to bead-up for a maximum liquid recovery. GRIPTIPS specially fit with INTEGRA pipettes and come in stackable boxes (non-sterile, sterile and filtered) featuring colour-coded inserts that correspond to the volume ranges of the INTEGRA pipettes.... Read More | Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique Viscous samples, detergents and other low surface tension liquids tend to interact with standard pipette tips forming a thin liquid film on the pipette tip inner wall. This effect leads to pipetting inaccuracy and inconsistency as well as loss of precious reagents. INTEGRA uses a unique polypropylene blend to mold Low Retention GRIPTIPS with heightened hydrophobic properties. Using Low Retention GRIPTIPS prevents low surface tension samples from spreading out and “wetting” the inner wall of the tips, allowing them to bead-up for a maximum liquid recovery. GRIPTIPS specially fit with INTEGRA pipettes and come in stackable boxes (non-sterile, sterile and filtered) featuring colour-coded inserts that correspond to the volume ranges of the INTEGRA pipettes.... Read More |
| Type | Reagent Reservoir | Inquire | Inquire | Inquire | Inquire |
| Applications | Inquire | Inquire | Inquire | For use with viscous samples, detergents and other low surface tension liquids | Inquire |
| Quantity | 30 or 200 per case; 25 ml (5 ml + 10 ml) | 30 reservoirs individually wrapped, sterile, 1 base per case | 30 individually sealed or 100 bulk; 150 ml or 300 ml | 5 boxes | 6 or 7 boxes of 96 tips |
| Get Quote | Supplier Page | Supplier Page | Supplier Page | Supplier Page | Supplier Page |