Lab Consumables

FluidX TPE septum caps have been developed to meet the demands of sample security, management and tracking in modern high-density storage applications. A cost effective sealing option for samples that are only accessed occasionally. Compatible with 96-format tubes, available for use with internal

FluidX TPE septum caps have been developed to meet the demands of sample security, management and tracking in modern high-density storage applications. A cost effective sealing option for samples that are only accessed occasionally. Compatible with 96-format tubes, available for use with internal thread tubes and suitable for use with automatic and semi-automatic cappers and de-cappers.

• Optimal seal quality
• Suitable for cryogenic storage as low as -80°C
• Manufactured from high-quality thermo plastic elastomer (TPE)
• Available on backing mats to help facilitate automation or bulk
• Pierceable and disposable
• Suitable for sealing internal thread tubes, compatible with Azenta internal 96-format tubes
• Internal thread caps come in a choice of five colors to aid sample identification
• Broad operating temperature range: -80°C to +110°C
• Ideal solution for -20°C storage with occasional access

4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR

Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and

4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR

Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal.

This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer.

A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling.

Key Features:

• Pierceable
• Peelable
• Resealable
• Seal integrity range: -20°C to 110°C
• Moderate solvent resistance
• Autoclavable (121°C)
• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Seals polypropylene and polystyrene plates
• Suitable for short term storage
• Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
• Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
• Non-sterile as standard; sterilization available upon request

4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube

4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted.

The Individual Access range includes PCR plates with 2D coded flat bottoms for applications that require superior sample tracking. In applications where it is essential for samples to be tracked throughout their processing, e.g. for diagnostic assays on clinical samples, tube labeling is a far safer and reliable method compared to cap or seal labeling (which can be misplaced, damaged or rendered unreadable after piercing).

Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Sample tubes can be identified by the unique 2D code on the base of the wells, removed from the Individual Access plate quickly and easily, and moved to another Individual Access frame for downstream processing or storage.

Quick selection of desired tubes reduces the time needed for the sample plate to be out of the freezer and therefore reduces the chance of other wells defrosting in the meantime. Flat bottom PCR plates can be stacked, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
• Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
• <100μl working volume, <180μl total well capacity
• Rigid polycarbonate frame provides mechanical stability of the plate
• These plates are labeled with linear Code 128-format barcodes to aid identification and traceability for your samples
• Alphanumeric grid reference to aid well and sample identification
• Suitable for small volume sample storage, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack
• Ideal for use with robotic systems
• Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
• Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
• Each tube can still be separated after sealing
• Also available as a Individual Access optical bottom plate (4ti-0970/RA) with black frame, ideal for microscopy and PCR
• Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
• We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
• The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access

FluidX 0.48ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.48ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.

Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample

Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample retrieval, therefore creating a reduction in reagent wastage resulting in cost savings. Azenta Life Sciences tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities.

• Unique design with combined ?v? and ?u? shaped bottom
• Sample identification from 1D, 2D and human readable code
• Capability to work with automation, designed for liquid handlers
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 48-well format SBS racks or bulk

Suitable for use with liquid handling automation, whether reformatting, cherry picking, aliquoting an/or normalization. The 1.6ml Maximum Recovery tube offers unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities. Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.