| Description | 4titude 96 Individual tubes in plate format, low profile, flat optical bottom, 0.1ml clear polypropylene tubes, black rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 Well, fully skirted, low profile format with each tube inserted 4titude 96 Individual tubes in plate format, low profile, flat optical bottom, 0.1ml clear polypropylene tubes, black rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 Well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The Individual Access range includes PCR plates with optically clear flat bottom wells for microscopy applications. The Individual Access 96 Well Skirted Optical Bottom PCR Plates (next to their counterpart within our FrameStar® range, 4ti-0970) are currently unique in the market, being suitable for use in both microscopy and PCR, for example, when single cell sorting is followed by molecular biology applications such as qPCR and sequencing. Due to their flat bottoms and stackability, these plates are well suited for small sample volume storage (such as compound libraries), with no risk of damaging the seal of the plate below. Additionally, the small well volume enables excellent sample recovery. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR. Together with the SBS footprint, this makes the plate suitable for use with robotic systems, ideal for both small and high throughput labs. Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <180μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- Alphanumeric grid reference to aid well and sample identification
- Suitable for microscopy and small volume sample storage
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
- Each tube can still be separated after sealing
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Also available as a FrameStar plate (4ti-0970) with fixed wells
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
- Available barcoded upon request
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage. The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
- Peelable
- Seal integrity range: -20°C to 110°C
- Non-sterile
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, qPCR
- Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
- Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
- Perforated sheet format: 137 x 71mm, for tearing into 12 well strips
... Read More | 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal is a laminate seal compatible with PP, PE, PS, COC and PC plates, providing the highest flexibility in plate material choice. Sample access is possible by peeling from the compatible materials and also by piercing the seal with needles, but not with plastic tips. It is resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal. Universal Peel Heat Seal forms a complete seal to a plate enabling low temperature uses as well as high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance. Use of Universal Peel Heat Seal makes roll changes unnecessary even for customers using different microplate materials, because with minor adjustments of sealing parameters all common microplate materials can be sealed to. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Pierceable with needle, but not with standard pipette tips
- Peelable
- Seal integrity temperature range: -80°C to 90°C (110°C when used with a pressurized heated lid)
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Suitable for low temperature sample storage and high temperature uses, such as PCR
- Compatible with PP, PE, PS, COC and PC plates
- Wide material compatibility allows for high throughput sealing of different plates without the need for roll changes
- Resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal
- Sheet format: 125mm x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in two roll dimensions, to suit your choice of automatic heat sealing equipment
... Read More | FluidX 0.3ml dual-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
FluidX 0.3ml dual-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 96-well format SBS racks or bulk
- Sealable with screw caps/TPE septum caps
Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanent laser etched 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms. Both codes are identical and auditing processes guarantee both codes match; standard 2D coding option is white on black. ... Read More |