| Description | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; standard profile, 0.2ml polypropylene wells, polycarbonate frame; working volume: <200μl, total well capacity: 300μl. The 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; standard profile, 0.2ml polypropylene wells, polycarbonate frame; working volume: <200μl, total well capacity: 300μl. The FrameStar Breakable Horizontally and Vertically PCR Plates allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Standard 0.2ml (200μl) working volume, with a 0.3ml (300μl) total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, standard profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1; working volume: <100μl, total well capacity: 200μl. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1; working volume: <100μl, total well capacity: 200μl. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, and makes it ideal for use with robotic systems. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Ideal for use with robotic systems
- Compatible with standard multichannel pipettes
- Ethylene oxide treated option available (4ti-OX960C/SBC) for forensic use
- Ultra-low DNA binding option available (4ti-LB0960/RIG) for sensitive applications with ultra-low DNA input and for maximum DNA recovery after low temperature storage and high temperature incubation
- Available barcoded upon request
- Clear Polystyrene Lid (4ti-0287) available for 4ti-0960/RIG
... Read More | FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the 9x9, 10x10, and 14x14 Cryo Racks enable ease of access to samples with an open bottom to allow 2D code reading on the Azenta Life Sciences Full Rack Readers. The Cryo Boxes are compatible with a broad range of tube formats, allowing you to store legacy collections and maintain ease of access to your valuable samples. - Available in 9x9, 10x10 and 14x14 array
- Cryo racks can be supplied with a unique 2D barcode identifier which can be read at the same time as the tube 2D barcode, to provide more secure sample tracking
- Open bottom for 2D barcode decoding on Azenta Life Sciences Readers
- Compatible with a number of tubes from Azenta as well as other manufacturers
- Unique identifier on every freeze box, in 1D & 2D format
- Optimizes storage space by increasing sample density
... Read More | Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Feature plastic, adjustable slats that can be moved to accommodate multiple vial sizes. Recommended for use at room temperature, 4°C, -20°C and -80°C. - Lid fastened to the base
- Easy to close/open even when frozen and minimized contamination risk due to patented hinged lid
- Plastic dividers for protection during exposure
- Laminated fiberboard for durability and water resistance
- Grid numbers listed on top, inside and bottom for better tracking
- Different color options for easier tracking
- Recommended for use from room temperature to -80°C
- Hinged CryoBox with Drain Holes suitable at vapor phase LN2
- Adjustable slats can be moved to accommodate multiple vial sizes
... Read More |