| Catalog Number | 4ti-0126, 4ti-0132, 4ti-0136, 4ti-0137 | 4ti-0785/P, 4ti-0785/B, 4ti-0785/G, 4ti-0785/R, 4ti-0785/X, 4ti-0785/M, 4ti-0785/XW, 4ti-0785/W/2D, 4ti-0785/X/2D, 4ti-0786/P, 4ti-0786/B, 4ti-0786/G, 4ti-0786/R, 4ti-0786/X, 4ti-0786/M, 4ti-0786/XW, 4ti-0786/W/2D, 4ti-0786/X/2D | 4ti-0517, 4ti-0517/ST | 4ti-0535, 4ti-0535/122, 4ti-0535/REMP, 4ti-0535/S, 4ti-0537, 4ti-0537/REMP, 4ti-0537/S, 4ti-0536 | FluidX |
| Description | 4titude 1.2ml and 2.2ml square wells, U and V shaped bottom, clear polypropylene. These storage plates are designed for high density sample collection and storage for a wide array of applications within cell biology, molecular biology and drug discovery. They come in three formats: 1.2ml 4titude 1.2ml and 2.2ml square wells, U and V shaped bottom, clear polypropylene. These storage plates are designed for high density sample collection and storage for a wide array of applications within cell biology, molecular biology and drug discovery. They come in three formats: 1.2ml volume U shaped well plates (4ti-0126), 2.2ml volume V shaped (4ti-0132), and 2.2ml volume U shaped (4ti-0136) plates. 4ti-0126 is also recommended as an elution plate on KingFisher™ platforms. All of these plates are ultra-flat for a completely uniform seal, either with adhesive or heat seals, or with our accompanying silicone sealing mat (4ti-0137). These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Key Features: - Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
- Autoclavable
- Free from RNase, DNase, human genomic DNA and endotoxins
- Conical V-bottoms (4ti-0132) and U-shaped bottoms (4ti-0126 and 4ti-0136)
- Square wells, to make the best use of space, and to improve mixing
- Alphanumeric grid reference to aid well and sample identification
- SBS footprint
- Clear plate, perfect for storage applications
- Temperature range for use: -80°C to 120°C
- Best for precipitation, centrifugation and small volume recovery due to the conical V bottom, as the liquid gathers at the lowest point of the V for easy pipetting
- U-shaped bottom plates are best for washing, mixing and pelleting and give high surface area
- Stackable
- Suitable for adhesive and heat sealing
- Available with a U-shaped bottom in 1.2ml and 2.2ml
- Also available with a V-shaped bottom in 2.2ml
- Non-sterile as standard, sterilization available upon request
- Available barcoded upon request
- A clear silicone sealing mat (4ti-0137) is also available to fit these plates
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, working volume: <200μl, total well capacity: 300μl; available with either strips of domed or flat optical caps Azenta Life Sciences 8 Well PCR Tube Strips with PC Frame are a 2-component design, combining the 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, working volume: <200μl, total well capacity: 300μl; available with either strips of domed or flat optical caps Azenta Life Sciences 8 Well PCR Tube Strips with PC Frame are a 2-component design, combining the advantages of thin-walled tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Made of polypropylene, for the most efficient heat transfer, as well as an inert surface with low binding capabilities for nucleic acids, proteins and other molecules
- By molding the frame portion in a more rigid polymer, the mechanical stability of the strip has been greatly improved compared with traditional single piece products
- End tabs allow for easy handling and labeling of the strips
- Compatible with the majority of thermal cyclers
- Available with the following frame color options for the clear well variety, for color coding of experiments: purple, blue, green, red, and black
- Also available with white wells in black frames for optical assays such as those used in qPCR, as white wells increase the signal-to-noise ratio by maximizing reflection of light in fluorescent based assays
- Available with either domed cap strips or with flat optically clear caps
- Also available with an off-the-shelf 2D code, offering an endless supply of unique code combinations
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including cryogenic storage. The external thread design offers a superior seal with higher working volume, while the internal thread caps outperform traditional O-ring seals, preventing leaks during freezing. Developed for manual, semi-automated, or fully automated workflows, FluidX tubes provide reliable sample audit traceability across labs and storage locations.... Read More |