Lab Consumables

4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI^® instruments. This ABI^® Style PCR plate offers the benefits of our 2-component design to ABI^®

4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI^® instruments. This ABI^® Style PCR plate offers the benefits of our 2-component design to ABI^® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability. We recommend this semi-skirted plate for use with ABI^® thermal cyclers and sequencers; it can be used directly with ABI^® instruments with no adapters necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in this case, using our FrameStar Fast Plate is recommended instead.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time quantitative PCR (RT-qPCR) results
• <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
• Rigid polycarbonate frame for added mechanical stability
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Ideal for use with ABI^® thermal cyclers & sequencers
• Recommended for low volume PCR
• Compatible with standard multichannel pipettes
• Ideal for use with robotic systems
• Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
• Ethylene oxide treated option available for forensic use
• Available barcoded upon request
• Combi packs available (for 4ti-0730/C) with Optically Clear Windowed qPCR Seal (4ti-0565)

4titude 1.2ml or 2.0ml round wells, U-shaped bottom, clear polypropylene. These 96 deep well storage microplates are suitable for many manual and automated protocols, such as the Illumina^® library and sample preparations, due to the plates' SBS footprint. Additionally, they are suitable for use

4titude 1.2ml or 2.0ml round wells, U-shaped bottom, clear polypropylene. These 96 deep well storage microplates are suitable for many manual and automated protocols, such as the Illumina^® library and sample preparations, due to the plates' SBS footprint. Additionally, they are suitable for use on magnetic plates for bead separation protocols. Our round deep well storage microplates are available in two types of well volumes: 1.2ml wells (4ti-0120) and 2.0ml wells (4ti-0130).

Both of these plates are ultra-flat for a completely uniform seal, either with our adhesive or heat seals, or with our accompanying silicone sealing mats (4ti-0135 mat for the 1.2ml plate; 4ti-0138 mat for the 2.0ml plate). These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform.

Key Features:

• Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
• Autoclavable
• Free from RNase, DNase, human genomic DNA and endotoxins
• U-shaped bottoms
• Round wells, suitable for most applications as they reduce droplet effects and wicking
• Alphanumeric grid reference to aid well and sample identification
• SBS footprint
• Clear plate, perfect for storage applications
• Suitable as a collection plate from filter systems
• Temperature range for use: -80°C to 120°C
• U-shaped bottom plates are best for washing, mixing and pelleting and give high surface area
• Stackable
• Suitable for adhesive and heat sealing
• Available with 1.2ml and 2.0ml wells
• Non-sterile as standard, sterilization available upon request
• Available barcoded upon request
• 2 clear silicone sealing mats (4ti-0135 and 4ti-0138) are also available to fit these plates

4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage

Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an

4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage

Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an optically clear polymer film forming a permanent seal to polypropylene plates. The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays.

The Clear Weld Heat Seal forms a complete seal to a plate, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations. This seal is suitable for PCR/qPCR, even without the use of a pressurized heated lid, and is 100% effective when used in water bath thermal cyclers.

The permanent nature of this 100% effective seal renders it suitable for the storage and disposal of hazardous material. Clear Weld Heat Seal demonstrates a good solvent resistance and can be utilized for long term compound storage. Samples can be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398).

This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer.

Key Features:

• Permanent seal
• Difficult to pierce
• Non-peelable
• Seal integrity range: -80°C to 110°C
• DMSO and solvent resistant
• Autoclavable (121°C)*
• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials
• Seals polypropylene plates
• Compatible with water bath thermal cyclers
• Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
• Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
• Non-sterile as standard; sterilization available upon request

* Once autoclaved, not recommended for PCR applications.

4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage

This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals

4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage

This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502).

Key Features:

• Non-pierceable
• Peelable
• Seal integrity range: -20°C to 80°C
• Free from DNase, RNase, and human genomic DNA
• Applications: long-term plate storage, samples containing <80% Dimethyl Sulfoxide (DMSO) can be stored for up to 5 years
• Removal: this seal will not leave a sticky residue on the plate surface following removal
• Suitable for cutting to fit part plates
• Sheet format: 122 x 80mm, to fit all standard SBS footprint plates, PCR and qPCR plates and part plates, microplates, assay and storage plates
• Non-sterile as standard; sterilization available upon request

FluidX 0.9ml dual-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.9ml dual-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent laser etched 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms. Both codes are identical and auditing processes guarantee both codes match; standard 2D coding option is white on black.