| Description | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <200μl, total well capacity: 300μl; universal non-skirted plate designed for use on all major thermal cyclers. The rigid FrameStar 2-component design eliminates warping and 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <200μl, total well capacity: 300μl; universal non-skirted plate designed for use on all major thermal cyclers. The rigid FrameStar 2-component design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude 96 Individual tubes in plate format, low profile, flat optical bottom, 0.1ml clear polypropylene tubes, black rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 Well, fully skirted, low profile format with each tube inserted 4titude 96 Individual tubes in plate format, low profile, flat optical bottom, 0.1ml clear polypropylene tubes, black rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 Well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The Individual Access range includes PCR plates with optically clear flat bottom wells for microscopy applications. The Individual Access 96 Well Skirted Optical Bottom PCR Plates (next to their counterpart within our FrameStar® range, 4ti-0970) are currently unique in the market, being suitable for use in both microscopy and PCR, for example, when single cell sorting is followed by molecular biology applications such as qPCR and sequencing. Due to their flat bottoms and stackability, these plates are well suited for small sample volume storage (such as compound libraries), with no risk of damaging the seal of the plate below. Additionally, the small well volume enables excellent sample recovery. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR. Together with the SBS footprint, this makes the plate suitable for use with robotic systems, ideal for both small and high throughput labs. Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <180μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- Alphanumeric grid reference to aid well and sample identification
- Suitable for microscopy and small volume sample storage
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
- Each tube can still be separated after sealing
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Also available as a FrameStar plate (4ti-0970) with fixed wells
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
- Available barcoded upon request
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
... Read More | FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 96-well format SBS racks or bulk
- Sealable with screw caps/TPE septum caps
Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white. ... Read More | FluidX TPE septum caps have been developed to meet the demands of sample security, management and tracking in modern high-density storage applications. A cost effective sealing option for samples that are only accessed occasionally. Compatible with 96-format tubes, available for use with internal FluidX TPE septum caps have been developed to meet the demands of sample security, management and tracking in modern high-density storage applications. A cost effective sealing option for samples that are only accessed occasionally. Compatible with 96-format tubes, available for use with internal thread tubes and suitable for use with automatic and semi-automatic cappers and de-cappers. - Optimal seal quality
- Suitable for cryogenic storage as low as -80°C
- Manufactured from high-quality thermo plastic elastomer (TPE)
- Available on backing mats to help facilitate automation or bulk
- Pierceable and disposable
- Suitable for sealing internal thread tubes, compatible with Azenta internal 96-format tubes
- Internal thread caps come in a choice of five colors to aid sample identification
- Broad operating temperature range: -80°C to +110°C
- Ideal solution for -20°C storage with occasional access
... Read More |