| Description | 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The Individual Access range includes PCR plates with 2D coded flat bottoms for applications that require superior sample tracking. In applications where it is essential for samples to be tracked throughout their processing, e.g. for diagnostic assays on clinical samples, tube labeling is a far safer and reliable method compared to cap or seal labeling (which can be misplaced, damaged or rendered unreadable after piercing). Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Sample tubes can be identified by the unique 2D code on the base of the wells, removed from the Individual Access plate quickly and easily, and moved to another Individual Access frame for downstream processing or storage. Quick selection of desired tubes reduces the time needed for the sample plate to be out of the freezer and therefore reduces the chance of other wells defrosting in the meantime. Flat bottom PCR plates can be stacked, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <180μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- These plates are labeled with linear Code 128-format barcodes to aid identification and traceability for your samples
- Alphanumeric grid reference to aid well and sample identification
- Suitable for small volume sample storage, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Each tube can still be separated after sealing
- Also available as a Individual Access optical bottom plate (4ti-0970/RA) with black frame, ideal for microscopy and PCR
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
... Read More | 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the Roche LightCycler® 480, and are in a 384 well format for reaction volumes of up to 30μl. The rigid two-component design eliminates warping and distortion during the PCR process, making it ideal for use with robotic systems. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <30μl working volume, 55μl total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Compatible with Roche LightCycler® 480
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available as a clear polycarbonate frame with clear polypropylene wells
- Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Available barcoded upon request
- Combi packs available with qPCR Seal (4ti-0560)
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access Pierce Heat Seal is compatible with polypropylene and polystyrene plates, featuring 96 individual foil seal spots on a removable backing. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents. These seals result in individually sealed tubes, and they can be pierced with a pipette tip manually, or by a liquid handling robot. Individual Access Pierce Heat Seal can be resealed by applying another Individual Access Pierce Seal straight on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Key Features: - 96 individual foil seal spots on a removable backing
- Pierceable
- 4 pin holes for exact positioning in special adapters of the Semi-Automated Sheet Heat Sealer
- Resealable
- Seal integrity range: -20°C to 120°C
- Good solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for long term storage
- Best used in combination with our Individual Access plates
- Sheet format: 127 x 100mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal is a laminate seal compatible with PP, PE, PS, COC and PC plates, providing the highest flexibility in plate material choice. Sample access is possible by peeling from the compatible materials and also by piercing the seal with needles, but not with plastic tips. It is resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal. Universal Peel Heat Seal forms a complete seal to a plate enabling low temperature uses as well as high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance. Use of Universal Peel Heat Seal makes roll changes unnecessary even for customers using different microplate materials, because with minor adjustments of sealing parameters all common microplate materials can be sealed to. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Pierceable with needle, but not with standard pipette tips
- Peelable
- Seal integrity temperature range: -80°C to 90°C (110°C when used with a pressurized heated lid)
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Suitable for low temperature sample storage and high temperature uses, such as PCR
- Compatible with PP, PE, PS, COC and PC plates
- Wide material compatibility allows for high throughput sealing of different plates without the need for roll changes
- Resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal
- Sheet format: 125mm x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in two roll dimensions, to suit your choice of automatic heat sealing equipment
... Read More |