Lab Consumables

4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard"

4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
• <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
• Rigid polycarbonate frame for added mechanical stability
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Recommended for low volume PCR
• Compatible with standard multichannel pipettes
• Available with the following frame color options for the clear well variety: purple, blue, and clear
• Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays

4titude rigid polycarbonate frame, for use with Removable 8 Well PCR Tube Strips; for use on Roche LightCycler^® 480. These frames of 96 Well Semi-Skirted PCR Plate for Removable 8 Well Tube Strips, Roche Style are molded from rigid polycarbonate for use with our polypropylene Removable 8 Well

4titude rigid polycarbonate frame, for use with Removable 8 Well PCR Tube Strips; for use on Roche LightCycler^® 480. These frames of 96 Well Semi-Skirted PCR Plate for Removable 8 Well Tube Strips, Roche Style are molded from rigid polycarbonate for use with our polypropylene Removable 8 Well PCR Tube Strips. The Removable 8 Well PCR Tube Strips are inserted into the frames to form a complete plate, part plate, or individual strip with an easy-to-handle frame. As the Removable 8 Well PCR Tube Strips are interchangeable with the frames, the frames themselves are re-usable; simply purchase more Removable 8 Well PCR Tube Strips to use.

The frames can be purchased separately, or pre-loaded with Removable 8 Well PCR Tube Strips.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• The Removable 8 Well PCR Tube Strips have ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
• The Removable 8 Well PCR Tube Strips have a low profile 0.1ml (100μl) working volume, with a 0.2ml (200μl) total well capacity when used with sealing options
• Raised well rims prevent cross contamination and facilitate effective sealing for reduced evaporation
• Rigid polycarbonate frames, which reduce thermal expansion and sample evaporation during PCR, leading to improved consistency in PCR results
• Alphanumeric grid reference to aid well and sample identification
• Compatible with standard multichannel pipettes
• Available as a 96 Well Semi-Skirted Frame, Roche Style for use with the Roche LightCycler^® 480
• Also available as a 96 Well Skirted Frame for universal use
• Frames can be purchased on their own or pre-loaded with Removable 8 Well PCR Tube Strips
• The Removable 8 Well PCR Tube Strips are available with clear wells
• The Removable 8 Well PCR Tube Strips also available with white wells, giving the highest sensitivity and consistency for fluorescent detection during qPCR
• Available barcoded upon request

4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips

Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high

4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips

Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage.

The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products.

For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502).

Key Features:

• Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
• Peelable
• Seal integrity range: -20°C to 110°C
• Non-sterile
• Free from DNase, RNase, and human genomic DNA
• Applications: PCR, qPCR
• Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
• Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
• Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
• Perforated sheet format: 137 x 71mm, for tearing into 12 well strips

CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables

CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables the use of Thermoconductive Rack thermo-conductive sample modules to hold microfuge tubes, cryogenic vials, PCR tubes or plates, and more. Available in single or double capacity.

• Ice-free cooling/freezing systems with lid or as open platform
• Fits a choice of Thermoconductive Rack modules
• Small footprint ideal for use in the hood especially in keeping temperature sensitive solutions cold
• CoolBox with lid keeps samples cold for up to 16 hours
• CoolBox with lid keeps samples frozen for up to 8 hours
• Open platform keeps samples cold for up to 4 hours
• The built-in 1-8ºC temperature indicator provides visual assurance of operational temperature while working

FluidX 0.65ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.65ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.