| Description | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude 190μm clear base imaging microplate, black frame. Optically Clear Tissue Culture Plates have been designed for high content screening (HCS) assays in drug development and related areas. They are also suitable for homogeneous assays, employing fluorescence intensity, FRET and TR-FRET 4titude 190μm clear base imaging microplate, black frame. Optically Clear Tissue Culture Plates have been designed for high content screening (HCS) assays in drug development and related areas. They are also suitable for homogeneous assays, employing fluorescence intensity, FRET and TR-FRET where measurements are bottom-read. The high-quality optical base plate assures the necessary accuracy and consistency for automated high throughput systems, generating optimum signal-to-noise ratios. Using state-of-the-art manufacturing technology, we have developed a product which offers several key advantages to the end user. Optically Clear Tissue Culture Plates are assembled using unique patented laser welding technology which reduces auto fluorescence and does not inhibit cell growth. Available with 190μm polystyrene base. Available TC treated: our advanced tissue-culture (TC) treatment method evenly coats each well for optimal cell adhesion properties for highest reproducibility between wells, plates and batches. Key Features: - Leak free
- Free from DNase, RNase, human genomic DNA, and cyto-toxic
- Optimum signal-to-noise ratios
- Good cell adhesion
- Wicking and bubble formation eliminated
- SBS footprint
- Alphanumeric grid reference
- Recommended for confocal microscopy due to reduced cross-talk and superior base flatness
- Reduced auto fluorescence ensures their suitability for fluorescent assays
- Suitable for assays that measure absorbance in the visible light range (400-900nm wavelengths)
- Suitable for colorimetric assays
- Suitable for homogeneous assays
- Suitable for use in BMG lab tech, Molecular Devices, Promega Glomax and other plate readers
- Suitable for adhesive and heat sealing: our Moisture Barrier Seal 96 (4ti-0516/96) is recommended as it is optically clear and allows repeated imaging without removal, reducing contamination risks
- Available with 190μm polystyrene base
- All plates come sterilized, apart from 4ti-0224
- TC treated option available (4ti-0221)
- Available barcoded upon request
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile, 0.1ml wells, <100μl working volume, with a 200μl total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, low profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate
... Read More | FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the 9x9, 10x10, and 14x14 Cryo Racks enable ease of access to samples with an open bottom to allow 2D code reading on the Azenta Life Sciences Full Rack Readers. The Cryo Boxes are compatible with a broad range of tube formats, allowing you to store legacy collections and maintain ease of access to your valuable samples. - Available in 9x9, 10x10 and 14x14 array
- Cryo racks can be supplied with a unique 2D barcode identifier which can be read at the same time as the tube 2D barcode, to provide more secure sample tracking
- Open bottom for 2D barcode decoding on Azenta Life Sciences Readers
- Compatible with a number of tubes from Azenta as well as other manufacturers
- Unique identifier on every freeze box, in 1D & 2D format
- Optimizes storage space by increasing sample density
... Read More |