| Catalog Number | 4ti-0720, 4ti-0720/B, 4ti-0720/C, 4ti-0721 | 4ti-0540, 4ti-0540/80, 4ti-0540/REMP, 4ti-0540/S, 4ti-0542, 4ti-0542/REMP, 4ti-0542/S, 4ti-0541 | 4ti-0550 | 4ti-0520, 4ti-0520/122, 4ti-0520/S, 4ti-0522, 4ti-0522/S, 4ti-0521 | 65-7514 / 65-7515 / 65-7516 / 65-7517 |
| Description | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a 4titude peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates. Samples can also be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Heat Seal forms a complete seal to a plate enabling both low temperature uses, including low temperature storage, and high temperature uses, such as PCR (when used with a pressurized heated lid). This seal demonstrates moderate solvent resistance and can be utilized for short term compound storage at room temperature. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Our sheet seals are inter-leaved with paper sheets to help denote which side is the sealing side and aid removal of one sheet at a time from the pack. For applications requiring high tensile strength (e.g. bead mill applications) please see ourClear Heat Seal Plus. Key Features: - Peelable
- Seal integrity range: -80°C to 80°C (to 110°C with a pressurized heated PCR lid)
- Optically clear
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: imaging, fluorescent detection, and colorimetric assays
- Suitable for PCR and qPCR
- Seals polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in preventing sample evaporation. The PCR Foil Seal is pierceable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum. It also has perforated end tabs for easy application and removal by peeling. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Pierceable
- Peelable
- Seal integrity range: -40°C to 120°C
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, incubation, storage
- Suitable for cutting to fit part plates
- Sheet format: 130 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
... Read More | 4titude peelable heat sealing foil; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Peel Heat Seal is a laminate seal compatible with 4titude peelable heat sealing foil; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Peel Heat Seal is a laminate seal compatible with polypropylene plates. It can be removed from polypropylene plates by peeling, even with a plate which has been removed directly from -80°C storage. Peel Heat Seal forms a complete seal to a plate enabling very low temperature uses, including very low temperature storage, and high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance and can be utilized for short term compound storage at room temperature. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Peelable from polypropylene and COC plates
- Seal integrity range: -80°C to 90°C (110°C when used with pressurized heated lid)
- Good solvent resistance including DMSO
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Suitable for short term room temperature storage
- Suitable for very low temperature storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | FluidXs 3.8ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
FluidXs 3.8ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 48-well format SBS racks or bulk
- Sealable with screw caps
Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white. ... Read More |
| Applications | PCR, qPCR, NGS | PCR, qPCR, Imaging, Fluorescent Detection, Colorimetric Assays | PCR, Storage Applications, Incubation | PCR, Storage Applications | (For research use only) Biobanking, Cryogenic Storage, Cancer Research, Cellular and Molecular Biology, Drug Discovery, Compound Libraries, Reagent Storage, CDMOs |